-- extracted from draft-ietf-idr-bgp4-mib-14.txt -- at Sat Apr 24 06:17:53 2004 BGP4-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, Integer32, Counter32, Gauge32, mib-2 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF; bgp MODULE-IDENTITY LAST-UPDATED "200404220000Z" ORGANIZATION "IETF IDR Working Group" CONTACT-INFO "E-mail: idr@ietf.org Jeffrey Haas, Susan Hares (Editors) NextHop Technologies 825 Victors Way Suite 100 Ann Arbor, MI 48108-2738 Tel: +1 734 222-1600 Fax: +1 734 222-1602 E-mail: jhaas@nexthop.com skh@nexthop.com" DESCRIPTION "The MIB module for the BGP-4 protocol. Copyright (C) The Internet Society (2004). This version of this MIB module is part of RFC yyyy; see the RFC itself for full legal notices." -- RFC Ed.: replace yyyy with actual RFC number & remove this note REVISION "200404220000Z" DESCRIPTION "Changes from RFC 1657: 1) Fixed the definitions of the traps to make them equivalent to their initial definition in RFC 1269. 2) Added compliance and conformance info. 3) Updated information for the values of bgpPeerNegotiatedVersion, bgp4PathAttrLocalPref, bgp4PathAttrCalcLocalPref, bgp4PathAttrMultiExitDisc, bgp4PathAttrASPathSegement. 4) Added additional clarification comments where needed. 5) Noted where objects do not fully reflect the protocol as Known Issues. 6) Updated the DESCRIPTION for the bgp4PathAttrAtomicAggregate object. 7) The following objects have had their DESCRIPTION clause modified to remove the text that suggested (using "should" verb) to initialize the counter to zero on a transition to the established state: bgpPeerInUpdates, bgpPeerOutUpdates, bgpPeerInTotalMessages, bgpPeerOutTotalMessages Those implementations that still do this are still compliant with this new wording. Appliciations should not assume counters to have started at zero. Published as RFC yyyy." -- RFC Ed.: replace yyyy with actual RFC number & remove this note REVISION "199405050000Z" DESCRIPTION "Translated to SMIv2 and published as RFC 1657." REVISION "199110261839Z" DESCRIPTION "Initial version, published as RFC 1269." ::= { mib-2 15 } bgpVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Vector of supported BGP protocol version numbers. Each peer negotiates the version from this vector. Versions are identified via the string of bits contained within this object. The first octet contains bits 0 to 7, the second octet contains bits 8 to 15, and so on, with the most significant bit referring to the lowest bit number in the octet (e.g., the MSB of the first octet refers to bit 0). If a bit, i, is present and set, then the version (i+1) of the BGP is supported." ::= { bgp 1 } bgpLocalAs OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The local autonomous system number." ::= { bgp 2 } -- BGP Peer table. This table contains, one entry per -- BGP peer, information about the BGP peer. bgpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF BgpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers." ::= { bgp 3 } bgpPeerEntry OBJECT-TYPE SYNTAX BgpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about the connection with a BGP peer." INDEX { bgpPeerRemoteAddr } ::= { bgpPeerTable 1 } BgpPeerEntry ::= SEQUENCE { bgpPeerIdentifier IpAddress, bgpPeerState INTEGER, bgpPeerAdminStatus INTEGER, bgpPeerNegotiatedVersion Integer32, bgpPeerLocalAddr IpAddress, bgpPeerLocalPort Integer32, bgpPeerRemoteAddr IpAddress, bgpPeerRemotePort Integer32, bgpPeerRemoteAs Integer32, bgpPeerInUpdates Counter32, bgpPeerOutUpdates Counter32, bgpPeerInTotalMessages Counter32, bgpPeerOutTotalMessages Counter32, bgpPeerLastError OCTET STRING, bgpPeerFsmEstablishedTransitions Counter32, bgpPeerFsmEstablishedTime Gauge32, bgpPeerConnectRetryInterval Integer32, bgpPeerHoldTime Integer32, bgpPeerKeepAlive Integer32, bgpPeerHoldTimeConfigured Integer32, bgpPeerKeepAliveConfigured Integer32, bgpPeerMinASOriginationInterval Integer32, bgpPeerMinRouteAdvertisementInterval Integer32, bgpPeerInUpdateElapsedTime Gauge32 } bgpPeerIdentifier OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP Identifier of this entry's BGP peer. This entry MUST be 0.0.0.0 unless the bgpPeerState is in the openconfirm or the established state." ::= { bgpPeerEntry 1 } bgpPeerState OBJECT-TYPE SYNTAX INTEGER { idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP peer connection state." ::= { bgpPeerEntry 2 } bgpPeerAdminStatus OBJECT-TYPE SYNTAX INTEGER { stop(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Manual Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Manual Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication." ::= { bgpPeerEntry 3 } bgpPeerNegotiatedVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated version of BGP running between the two peers. This entry MUST be zero (0) unless the bgpPeerState is in the openconfirm or the established state. Note that legal values for this object are between 0 and 255." REFERENCE "RFC yyyy, section 4.2." ::= { bgpPeerEntry 4 } -- RFC Ed.: replace yyyy with actual RFC number for the new BGP specification bgpPeerLocalAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The local IP address of this entry's BGP connection." ::= { bgpPeerEntry 5 } bgpPeerLocalPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The local port for the TCP connection between the BGP peers." ::= { bgpPeerEntry 6 } bgpPeerRemoteAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The remote IP address of this entry's BGP peer." ::= { bgpPeerEntry 7 } bgpPeerRemotePort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The remote port for the TCP connection between the BGP peers. Note that the objects bgpPeerLocalAddr, bgpPeerLocalPort, bgpPeerRemoteAddr and bgpPeerRemotePort provide the appropriate reference to the standard MIB TCP connection table." ::= { bgpPeerEntry 8 } bgpPeerRemoteAs OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The remote autonomous system number." ::= { bgpPeerEntry 9 } bgpPeerInUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of BGP UPDATE messages received on this connection." ::= { bgpPeerEntry 10 } bgpPeerOutUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of BGP UPDATE messages transmitted on this connection." ::= { bgpPeerEntry 11 } bgpPeerInTotalMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages received from the remote peer on this connection." ::= { bgpPeerEntry 12 } bgpPeerOutTotalMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages transmitted to the remote peer on this connection." ::= { bgpPeerEntry 13 } bgpPeerLastError OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode." ::= { bgpPeerEntry 14 } bgpPeerFsmEstablishedTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the BGP FSM transitioned into the established state for this peer." ::= { bgpPeerEntry 15 } bgpPeerFsmEstablishedTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This timer indicates how long (in seconds) this peer has been in the established state or how long since this peer was last in the established state. It is set to zero when a new peer is configured or the router is booted." ::= { bgpPeerEntry 16 } bgpPeerConnectRetryInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds." ::= { bgpPeerEntry 17 } bgpPeerHoldTime OBJECT-TYPE SYNTAX Integer32 ( 0 | 3..65535 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the value in bgpPeerHoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at least three seconds if it is not zero (0). If the Hold Timer has not been established with the peer this object MUST have a value of zero (0). If the bgpPeerHoldTimeConfigured object has a value of (0), then this object MUST have a value of (0)." REFERENCE "RFC yyyy, Section 4.2" -- RFC Ed.: replace yyyy with actual RFC number for the new BGP specification ::= { bgpPeerEntry 18 } bgpPeerKeepAlive OBJECT-TYPE SYNTAX Integer32 ( 0 | 1..21845 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with bgpPeerHoldTime, it has the same proportion as what bgpPeerKeepAliveConfigured has when compared with bgpPeerHoldTimeConfigured. If the KeepAlive timer has not been established with the peer this object MUST have a value of zero (0). If the of bgpPeerKeepAliveConfigured object has a value of (0), then this object MUST have a value of (0)." REFERENCE "RFC yyyy, Section 4.4" -- RFC Ed.: replace yyyy with actual RFC number for the new BGP specification ::= { bgpPeerEntry 19 } bgpPeerHoldTimeConfigured OBJECT-TYPE SYNTAX Integer32 ( 0 | 3..65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (bgpPeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds." ::= { bgpPeerEntry 20 } bgpPeerKeepAliveConfigured OBJECT-TYPE SYNTAX Integer32 ( 0 | 1..21845 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in bgpPeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by bgpPeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of bgpPeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds." ::= { bgpPeerEntry 21 } bgpPeerMinASOriginationInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds." ::= { bgpPeerEntry 22 } bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds." ::= { bgpPeerEntry 23 } bgpPeerInUpdateElapsedTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time bgpPeerInUpdates is incremented, the value of this object is set to zero (0)." ::= { bgpPeerEntry 24 } bgpIdentifier OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP Identifier of local system." ::= { bgp 4 } -- BGP Received Path Attribute Table. This table contains, -- one entry per path to a network, path attributes -- received from all peers running BGP version 3 or less. -- This table is obsolete, having been replaced in -- functionality with the bgp4PathAttrTable. bgpRcvdPathAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF BgpPathAttrEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The BGP Received Path Attribute Table contains information about paths to destination networks received from all peers running BGP version 3 or less." ::= { bgp 5 } bgpPathAttrEntry OBJECT-TYPE SYNTAX BgpPathAttrEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Information about a path to a network." INDEX { bgpPathAttrDestNetwork, bgpPathAttrPeer } ::= { bgpRcvdPathAttrTable 1 } BgpPathAttrEntry ::= SEQUENCE { bgpPathAttrPeer IpAddress, bgpPathAttrDestNetwork IpAddress, bgpPathAttrOrigin INTEGER, bgpPathAttrASPath OCTET STRING, bgpPathAttrNextHop IpAddress, bgpPathAttrInterASMetric Integer32 } bgpPathAttrPeer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The IP address of the peer where the path information was learned." ::= { bgpPathAttrEntry 1 } bgpPathAttrDestNetwork OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The address of the destination network." ::= { bgpPathAttrEntry 2 } bgpPathAttrOrigin OBJECT-TYPE SYNTAX INTEGER { igp(1),-- networks are interior egp(2),-- networks learned via the -- EGP protocol incomplete(3) -- networks that -- are learned by some other -- means } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The ultimate origin of the path information." ::= { bgpPathAttrEntry 3 } bgpPathAttrASPath OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2..255)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The set of ASs that must be traversed to reach the network. This object is probably best represented as SEQUENCE OF INTEGER. For SMI compatibility, though, it is represented as OCTET STRING. Each AS is represented as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;" ::= { bgpPathAttrEntry 4 } bgpPathAttrNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The address of the border router that should be used for the destination network." ::= { bgpPathAttrEntry 5 } bgpPathAttrInterASMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The optional inter-AS metric. If this attribute has not been provided for this route, the value for this object is 0." ::= { bgpPathAttrEntry 6 } -- BGP-4 Received Path Attribute Table. This table -- contains, one entry per path to a network, path -- attributes received from all peers running BGP-4. bgp4PathAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF Bgp4PathAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers." ::= { bgp 6 } bgp4PathAttrEntry OBJECT-TYPE SYNTAX Bgp4PathAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a path to a network." INDEX { bgp4PathAttrIpAddrPrefix, bgp4PathAttrIpAddrPrefixLen, bgp4PathAttrPeer } ::= { bgp4PathAttrTable 1 } Bgp4PathAttrEntry ::= SEQUENCE { bgp4PathAttrPeer IpAddress, bgp4PathAttrIpAddrPrefixLen Integer32, bgp4PathAttrIpAddrPrefix IpAddress, bgp4PathAttrOrigin INTEGER, bgp4PathAttrASPathSegment OCTET STRING, bgp4PathAttrNextHop IpAddress, bgp4PathAttrMultiExitDisc Integer32, bgp4PathAttrLocalPref Integer32, bgp4PathAttrAtomicAggregate INTEGER, bgp4PathAttrAggregatorAS Integer32, bgp4PathAttrAggregatorAddr IpAddress, bgp4PathAttrCalcLocalPref Integer32, bgp4PathAttrBest INTEGER, bgp4PathAttrUnknown OCTET STRING } bgp4PathAttrPeer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the peer where the path information was learned." ::= { bgp4PathAttrEntry 1 } bgp4PathAttrIpAddrPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Length in bits of the IP address prefix in the Network Layer Reachability Information field." ::= { bgp4PathAttrEntry 2 } bgp4PathAttrIpAddrPrefix OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by bgp4PathAttrIpAddrPrefixLen. Any bits beyond the length specified by bgp4PathAttrIpAddrPrefixLen are zeroed." ::= { bgp4PathAttrEntry 3 } bgp4PathAttrOrigin OBJECT-TYPE SYNTAX INTEGER { igp(1),-- networks are interior egp(2),-- networks learned via the -- EGP protocol incomplete(3) -- networks that -- are learned by some other -- means } MAX-ACCESS read-only STATUS current DESCRIPTION "The ultimate origin of the path information." ::= { bgp4PathAttrEntry 4 } bgp4PathAttrASPathSegment OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence of AS path segments. Each AS path segment is represented by a triple . The type is a 1-octet field which has two possible values: 1 AS_SET: unordered set of ASs a route in the UPDATE message has traversed 2 AS_SEQUENCE: ordered set of ASs a route in the UPDATE message has traversed. The length is a 1-octet field containing the number of ASs in the value field. The value field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255; Known Issues: o BGP Confederations will result in a type of value of either 3 or 4. o An AS Path may be longer than 255 octets. This may result in this object containing a truncated AS Path." ::= { bgp4PathAttrEntry 5 } bgp4PathAttrNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the border router that should be used for the destination network. This address is the nexthop address received in the UPDATE packet." ::= { bgp4PathAttrEntry 6 } bgp4PathAttrMultiExitDisc OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This metric is used to discriminate between multiple exit points to an adjacent autonomous system. A value of -1 indicates the absence of this attribute. Known Issues: o The BGP-4 specification uses an unsigned 32 bit number and thus this object cannot represent the full range of the protocol." ::= { bgp4PathAttrEntry 7 } bgp4PathAttrLocalPref OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The originating BGP4 speaker's degree of preference for an advertised route. A value of -1 indicates the absence of this attribute. Known Issues: o The BGP-4 specification uses an unsigned 32 bit number and thus this object cannot represent the full range of the protocol." ::= { bgp4PathAttrEntry 8 } bgp4PathAttrAtomicAggregate OBJECT-TYPE SYNTAX INTEGER { lessSpecificRouteNotSelected(1), -- Typo corrected from RFC 1657 lessSpecificRouteSelected(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "If the ATOMIC_AGGREGATE attribute is present in the Path Attributes then this object MUST have a value of 'lessSpecificRouteNotSelected'. If the ATOMIC_AGGREGATE attribute is missing in the Path Attributes then this object MUST have a value of 'lessSpecificRouteSelected'. Note that ATOMIC_AGGREGATE has been deprecated in the BGP specification." REFERENCE "RFC yyyy, Sections 5.1.6 and 9.1.4." -- RFC Ed.: Replace yyyy with latest BGP RFC ::= { bgp4PathAttrEntry 9 } bgp4PathAttrAggregatorAS OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note that propagation of AS of zero is illegal in the Internet." ::= { bgp4PathAttrEntry 10 } bgp4PathAttrAggregatorAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute." ::= { bgp4PathAttrEntry 11 } bgp4PathAttrCalcLocalPref OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The degree of preference calculated by the receiving BGP4 speaker for an advertised route. A value of -1 indicates the absence of this attribute. Known Issues: o The BGP-4 specification uses an unsigned 32 bit number and thus this object cannot represent the full range of the protocol." ::= { bgp4PathAttrEntry 12 } bgp4PathAttrBest OBJECT-TYPE SYNTAX INTEGER { false(1),-- not chosen as best route true(2) -- chosen as best route } MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of whether or not this route was chosen as the best BGP4 route for this destination." ::= { bgp4PathAttrEntry 13 } bgp4PathAttrUnknown OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "One or more path attributes not understood by this BGP4 speaker. Path attributes are recorded in the Update Path attribute format of type, length, value. Size zero (0) indicates the absence of such attributes. Octets beyond the maximum size, if any, are not recorded by this object. Known Issues: o Attributes understood by this speaker, but not represented in this MIB, are unavailable to the agent." ::= { bgp4PathAttrEntry 14 } -- Traps. -- Note that in RFC 1657, bgpTraps was incorrectly -- assigned a value of { bgp 7 } and each of the -- traps had the bgpPeerRemoteAddr object inappropriately -- removed from their OBJECTS clause. The following -- definitions restore the semantics of the traps as -- they were initially defined in RFC 1269. bgpNotification OBJECT IDENTIFIER ::= { bgp 0 } bgpEstablishedNotification NOTIFICATION-TYPE OBJECTS { bgpPeerRemoteAddr, bgpPeerLastError, bgpPeerState } STATUS current DESCRIPTION "The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state. This Notification replaces the bgpEstablished Notification." ::= { bgpNotification 1 } bgpBackwardTransNotification NOTIFICATION-TYPE OBJECTS { bgpPeerRemoteAddr, bgpPeerLastError, bgpPeerState } STATUS current DESCRIPTION "The BGPBackwardTransNotification Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. This Notification replaces the bgpBackwardsTransition Notification." ::= { bgpNotification 2 } -- { bgp 7 } is obsoleted bgpTraps OBJECT IDENTIFIER ::= { bgp 7 } bgpEstablished NOTIFICATION-TYPE OBJECTS { bgpPeerLastError, bgpPeerState } STATUS deprecated DESCRIPTION "The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state. This Notification has been replaced by the bgpEstablishedNotification Notification." ::= { bgpTraps 1 } bgpBackwardTransition NOTIFICATION-TYPE OBJECTS { bgpPeerLastError, bgpPeerState } STATUS deprecated DESCRIPTION "The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. This Notification has been replaced by the bgpBackwardTransNotification Notification." ::= { bgpTraps 2 } -- Conformance information bgp4MIBConformance OBJECT IDENTIFIER ::= { bgp 8 } bgp4MIBCompliances OBJECT IDENTIFIER ::= { bgp4MIBConformance 1 } bgp4MIBGroups OBJECT IDENTIFIER ::= { bgp4MIBConformance 2 } -- Compliance statements bgp4MIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the BGP4 mib." MODULE -- this module MANDATORY-GROUPS { bgp4MIBGlobalsGroup, bgp4MIBPeerGroup, bgp4MIBPathAttrGroup } GROUP bgp4MIBNotificationGroup DESCRIPTION "Implementation of BGP Notifications are completely optional in this MIB." ::= { bgp4MIBCompliances 1 } bgp4MIBDeprecatedCompliances MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement documenting deprecated objects in the BGP4 mib." MODULE -- this module GROUP bgp4MIBTrapGroup DESCRIPTION "Group containing TRAP objects that were improperly converted from SMIv1 in RFC 1657. The proper semantics have been restored with the objects in bgp4MIBNotificationGroup." ::= { bgp4MIBCompliances 2 } bgp4MIBObsoleteCompliances MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement documenting obsolete objects in the BGP4 mib." MODULE -- this module GROUP bgpRcvdPathAttrGroup DESCRIPTION "Group containing objects relevant to BGP-3 and earlier objects." ::= { bgp4MIBCompliances 3 } -- Units of conformance bgp4MIBGlobalsGroup OBJECT-GROUP OBJECTS { bgpVersion, bgpLocalAs, bgpIdentifier } STATUS current DESCRIPTION "A collection of objects providing information on global BGP state." ::= { bgp4MIBGroups 1 } bgp4MIBPeerGroup OBJECT-GROUP OBJECTS { bgpPeerIdentifier, bgpPeerState, bgpPeerAdminStatus, bgpPeerNegotiatedVersion, bgpPeerLocalAddr, bgpPeerLocalPort, bgpPeerRemoteAddr, bgpPeerRemotePort, bgpPeerRemoteAs, bgpPeerInUpdates, bgpPeerOutUpdates, bgpPeerInTotalMessages, bgpPeerOutTotalMessages, bgpPeerLastError, bgpPeerFsmEstablishedTransitions, bgpPeerFsmEstablishedTime, bgpPeerConnectRetryInterval, bgpPeerHoldTime, bgpPeerKeepAlive, bgpPeerHoldTimeConfigured, bgpPeerKeepAliveConfigured, bgpPeerMinASOriginationInterval, bgpPeerMinRouteAdvertisementInterval, bgpPeerInUpdateElapsedTime } STATUS current DESCRIPTION "A collection of objects for managing BGP peers." ::= { bgp4MIBGroups 2 } bgpRcvdPathAttrGroup OBJECT-GROUP OBJECTS { bgpPathAttrPeer, bgpPathAttrDestNetwork, bgpPathAttrOrigin, bgpPathAttrASPath, bgpPathAttrNextHop, bgpPathAttrInterASMetric } STATUS obsolete DESCRIPTION "A collection of objects for managing BGP-3 and earlier path entries. This conformance group, like BGP-3, is obsolete." ::= { bgp4MIBGroups 3 } bgp4MIBPathAttrGroup OBJECT-GROUP OBJECTS { bgp4PathAttrPeer, bgp4PathAttrIpAddrPrefixLen, bgp4PathAttrIpAddrPrefix, bgp4PathAttrOrigin, bgp4PathAttrASPathSegment, bgp4PathAttrNextHop, bgp4PathAttrMultiExitDisc, bgp4PathAttrLocalPref, bgp4PathAttrAtomicAggregate, bgp4PathAttrAggregatorAS, bgp4PathAttrAggregatorAddr, bgp4PathAttrCalcLocalPref, bgp4PathAttrBest, bgp4PathAttrUnknown } STATUS current DESCRIPTION "A collection of objects for managing BGP path entries." ::= { bgp4MIBGroups 4 } bgp4MIBTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { bgpEstablished, bgpBackwardTransition } STATUS deprecated DESCRIPTION "A collection of notifications for signaling changes in BGP peer relationships. Obsoleted by bgp4MIBNotificationGroup" ::= { bgp4MIBGroups 5 } bgp4MIBNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { bgpEstablishedNotification, bgpBackwardTransNotification } STATUS current DESCRIPTION "A collection of notifications for signaling changes in BGP peer relationships. Obsoletes bgp4MIBTrapGroup." ::= { bgp4MIBGroups 6 } END -- -- Copyright (C) The Internet Society (2004). All Rights Reserved. -- -- This document and translations of it may be copied and furnished to -- others, and derivative works that comment on or otherwise explain it -- or assist in its implementation may be prepared, copied, published -- and distributed, in whole or in part, without restriction of any -- kind, provided that the above copyright notice and this paragraph are -- included on all such copies and derivative works. However, this -- document itself may not be modified in any way, such as by removing -- the copyright notice or references to the Internet Society or other -- Internet organizations, except as needed for the purpose of -- developing Internet standards in which case the procedures for -- copyrights defined in the Internet Standards process must be -- followed, or as required to translate it into languages other than -- English. -- -- The limited permissions granted above are perpetual and will not be -- revoked by the Internet Society or its successors or assigns. -- -- This document and the information contained herein is provided on an -- "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING -- TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING -- BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION -- HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF -- MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.