-- extracted from rfc1238.txt -- at Mon Nov 15 17:12:00 1999 CLNS-MIB DEFINITIONS ::= BEGIN IMPORTS experimental, Counter FROM RFC1155-SMI PhysAddress FROM RFC-1213 OBJECT-TYPE FROM RFC-1212; -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in [9] -- the CLNS MIB module clns OBJECT IDENTIFIER ::= { experimental 1 } -- textual conventions ClnpAddress ::= OCTET STRING (SIZE (1..21)) -- This data type is used to model NSAP addresses. -- groups in the CLNS MIB clnp OBJECT IDENTIFIER ::= { clns 1 } error OBJECT IDENTIFIER ::= { clns 2 } echo OBJECT IDENTIFIER ::= { clns 3 } es-is OBJECT IDENTIFIER ::= { clns 4 } -- the CLNP group -- Implementation of this group is recommended for all -- systems which implement the CLNP. clnpForwarding OBJECT-TYPE SYNTAX INTEGER { is(1), -- entity is an intermediate system -- entity is an end system and does es(2) -- not forward PDUs } ACCESS read-write STATUS mandatory DESCRIPTION "The indication of whether this entity is active as an intermediate or end system. Only intermediate systems will forward PDUs onward that are not addressed to them." ::= { clnp 1 } clnpDefaultLifeTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The default value inserted into the Lifetime field of the CLNP PDU header of PDUs sourced by this entity." ::= { clnp 2 } clnpInReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input PDUs received from all connected network interfaces running CLNP, including errors." ::= { clnp 3 } clnpInHdrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input PDUs discarded due to errors in the CLNP header, including bad checksums, version mismatch, lifetime exceeded, errors discovered in processing options, etc." ::= { clnp 4 } clnpInAddrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input PDUs discarded because the NSAP address in the CLNP header's destination field was not a valid NSAP to be received at this entity. This count includes addresses not understood. For end systems, this is a count of PDUs which arrived with a destination NSAP which was not local." ::= { clnp 5 } clnpForwPDUs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input PDUs for which this entity was not the final destination and which an attempt was made to forward them onward." ::= { clnp 6 } clnpInUnknownNLPs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of locally-addressed PDUs successfully received but discarded because the network layer protocol was unknown or unsupported (e.g., not CLNP or ES-IS)." ::= { clnp 7 } clnpInUnknownULPs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of locally-addressed PDUs successfully received but discarded because the upper layer protocol was unknown or unsupported (e.g., not TP4)." ::= { clnp 8 } clnpInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input CLNP PDUs for which no problems were encountered to prevent their continued processing, but were discarded (e.g., for lack of buffer space). Note that this counter does not include any PDUs discarded while awaiting re-assembly." ::= { clnp 9 } clnpInDelivers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input PDUs successfully delivered to the CLNS transport user." ::= { clnp 10 } clnpOutRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of CLNP PDUs which local CLNS user protocols supplied to CLNP for transmission requests. This counter does not include any PDUs counted in clnpForwPDUs." ::= { clnp 11 } clnpOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of output CLNP PDUs for which no other problem was encountered to prevent their transmission but were discarded (e.g., for lack of buffer space). Note this counter includes PDUs counted in clnpForwPDUs." ::= { clnp 12 } clnpOutNoRoutes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLNP PDUs discarded because no route could be found to transmit them to their destination. This counter includes any PDUs counted in clnpForwPDUs." ::= { clnp 13 } clnpReasmTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of seconds which received segments are held while they are awaiting reassembly at this entity." ::= { clnp 14 } clnpReasmReqds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLNP segments received which needed to be reassembled at this entity." ::= { clnp 15 } clnpReasmOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLNP PDUs successfully re-assembled at this entity." ::= { clnp 16 } clnpReasmFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of failures detected by the CLNP reassembly algorithm (for any reason: timed out, buffer size, etc)." ::= { clnp 17 } clnpSegOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLNP PDUs that have been successfully segmented at this entity." ::= { clnp 18 } clnpSegFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLNP PDUs that have been discarded because they needed to be fragmented at this entity but could not." ::= { clnp 19 } clnpSegCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLNP PDU segments that have been generated as a result of segmentation at this entity." ::= { clnp 20 } clnpInOpts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLNP PDU segments that have been input with options at this entity." ::= { clnp 25 } clnpOutOpts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLNP PDU segments that have been generated with options by this entity." ::= { clnp 26 } clnpRoutingDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries." ::= { clnp 27 } -- the CLNP Interfaces table -- The CLNP interfaces table contains information on the -- entity's interfaces which are running the CLNP. clnpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF ClnpAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of addressing information relevant to this entity's CLNP addresses. " ::= { clnp 21 } clnpAddrEntry OBJECT-TYPE SYNTAX ClnpAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The addressing information for one of this entity's CLNP addresses." INDEX { clnpAdEntAddr } ::= { clnpAddrTable 1 } ClnpAddrEntry ::= SEQUENCE { clnpAdEntAddr ClnpAddress, clnpAdEntIfIndex INTEGER, clnpAdEntReasmMaxSize INTEGER (0..65535) } clnpAdEntAddr OBJECT-TYPE SYNTAX ClnpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The CLNP address to which this entry's addressing information pertains." ::= { clnpAddrEntry 1 } clnpAdEntIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { clnpAddrEntry 2 } clnpAdEntReasmMaxSize OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The size of the largest CLNP PDU which this entity can re-assemble from incoming CLNP segmented PDUs received on this interface." ::= { clnpAddrEntry 3 } -- The CLNP Routing table -- The CLNP routing table contains an entry for each route -- known to the entity. clnpRoutingTable OBJECT-TYPE SYNTAX SEQUENCE OF ClnpRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entity's CLNP routing table." ::= { clnp 22 } clnpRouteEntry OBJECT-TYPE SYNTAX ClnpRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A route to a particular destination." INDEX { clnpRouteDest } ::= { clnpRoutingTable 1 } ClnpRouteEntry ::= SEQUENCE { clnpRouteDest ClnpAddress, clnpRouteIfIndex INTEGER, clnpRouteMetric1 INTEGER, clnpRouteMetric2 INTEGER, clnpRouteMetric3 INTEGER, clnpRouteMetric4 INTEGER, clnpRouteNextHop ClnpAddress, clnpRouteType INTEGER, clnpRouteProto INTEGER, clnpRouteAge INTEGER, clnpRouteMetric5 INTEGER, clnpRouteInfo OBJECT IDENTIFIER } clnpRouteDest OBJECT-TYPE SYNTAX ClnpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The destination CLNP address of this route." ::= { clnpRouteEntry 1 } clnpRouteIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same as identified by the same value of ifIndex." ::= { clnpRouteEntry 2 } clnpRouteMetric1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's clnpRouteProto value. If this metric is not used, its value should be set to -1." ::= { clnpRouteEntry 3 } clnpRouteMetric2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's clnpRouteProto value. If this metric is not used, its value should be set to -1." ::= { clnpRouteEntry 4 } clnpRouteMetric3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's clnpRouteProto value. If this metric is not used, its value should be set to -1." ::= { clnpRouteEntry 5 } clnpRouteMetric4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's clnpRouteProto value. If this metric is not used, its value should be set to -1." ::= { clnpRouteEntry 6 } clnpRouteNextHop OBJECT-TYPE SYNTAX ClnpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The CLNP address of the next hop of this route." ::= { clnpRouteEntry 7 } clnpRouteType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following invalid(2), -- an invalidated route -- route to directly direct(3), -- connected (sub-)network -- route to a non-local remote(4) -- host/network/sub-network } ACCESS read-write STATUS mandatory DESCRIPTION "The type of route. Setting this object to the value invalid(2) has the effect of invaliding the corresponding entry in the clnpRoutingTable. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant clnpRouteType object." ::= { clnpRouteEntry 8 } clnpRouteProto OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following -- non-protocol information -- e.g., manually local(2), -- configured entries -- set via a network netmgmt(3), -- management protocol -- similar to ipRouteProto but -- omits several IP-specific -- protocols is-is(9), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14) } ACCESS read-only STATUS mandatory DESCRIPTION "The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols." ::= { clnpRouteEntry 9 } clnpRouteAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned." ::= { clnpRouteEntry 10 } clnpRouteMetric5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's clnpRouteProto value. If this metric is not used, its value should be set to -1." ::= { clnpRouteEntry 11 } clnpRouteInfo OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's clnpRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value." ::= { clnpRouteEntry 12 } -- the CLNP Address Translation table -- The Address Translation tables contain the CLNP address -- to physical address equivalences. Some interfaces do not -- use translation tables for determining address -- equivalences; if all interfaces are of this type, then the -- Address Translation table is empty, i.e., has zero -- entries. clnpNetToMediaTable OBJECT-TYPE SYNTAX SEQUENCE OF ClnpNetToMediaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CLNP Address Translation table used for mapping from CLNP addresses to physical addresses." ::= { clnp 23 } clnpNetToMediaEntry OBJECT-TYPE SYNTAX ClnpNetToMediaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains one CLNP address to `physical' address equivalence." INDEX { clnpNetToMediaIfIndex, clnpNetToMediaNetAddress } ::= { clnpNetToMediaTable 1 } ClnpNetToMediaEntry ::= SEQUENCE { clnpNetToMediaIfIndex INTEGER, clnpNetToMediaPhysAddress PhysAddress, clnpNetToMediaNetAddress ClnpAddress, clnpNetToMediaType INTEGER, clnpNetToMediaAge INTEGER, clnpNetToMediaHoldTime INTEGER } clnpNetToMediaIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { clnpNetToMediaEntry 1 } clnpNetToMediaPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "The media-dependent `physical' address." ::= { clnpNetToMediaEntry 2 } clnpNetToMediaNetAddress OBJECT-TYPE SYNTAX ClnpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The CLNP address corresponding to the media- dependent `physical' address." ::= { clnpNetToMediaEntry 3 } clnpNetToMediaType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following invalid(2), -- an invalidated mapping dynamic(3), static(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the clnpNetToMediaTable. That is, it effectively dissassociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant clnpNetToMediaType object." ::= { clnpNetToMediaEntry 4 } clnpNetToMediaAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds since this entry was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the type of entry." ::= { clnpNetToMediaEntry 5 } clnpNetToMediaHoldTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The time in seconds this entry will be valid. Static entries should always report this field as -1." ::= { clnpNetToMediaEntry 6 } clnpMediaToNetTable OBJECT-TYPE SYNTAX SEQUENCE OF ClnpMediaToNetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CLNP Address Translation table used for mapping from physical addresses to CLNP addresses." ::= { clnp 24 } clnpMediaToNetEntry OBJECT-TYPE SYNTAX ClnpMediaToNetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains on ClnpAddress to `physical' address equivalence." INDEX { clnpMediaToNetIfIndex, clnpMediaToNetPhysAddress } ::= { clnpMediaToNetTable 1 } ClnpMediaToNetEntry ::= SEQUENCE { clnpMediaToNetIfIndex INTEGER, clnpMediaToNetNetAddress ClnpAddress, clnpMediaToNetPhysAddress PhysAddress, clnpMediaToNetType INTEGER, clnpMediaToNetAge INTEGER, clnpMediaToNetHoldTime INTEGER } clnpMediaToNetIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { clnpMediaToNetEntry 1 } clnpMediaToNetAddress OBJECT-TYPE SYNTAX ClnpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The ClnpAddress corresponding to the media- dependent `physical' address." ::= { clnpMediaToNetEntry 2 } clnpMediaToNetPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "The media-dependent `physical' address." ::= { clnpMediaToNetEntry 3 } clnpMediaToNetType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following invalid(2), -- an invalidated mapping dynamic(3), static(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the clnpMediaToNetTable. That is, it effectively dissassociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant clnpMediaToNetType object." ::= { clnpMediaToNetEntry 4 } clnpMediaToNetAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds since this entry was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the type of entry." ::= { clnpMediaToNetEntry 5 } clnpMediaToNetHoldTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The time in seconds this entry will be valid. Static entries should always report this field as -1." ::= { clnpMediaToNetEntry 6 } -- the CLNP Error group -- Implementation of this group is recommended for all -- systems which implement the CLNP Error protocol. clnpInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLNP Error PDUs received by this entity." ::= { error 1 } clnpOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLNP Error PDUs sent by this entity." ::= { error 2 } clnpInErrUnspecs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unspecified CLNP Error PDUs received by this entity." ::= { error 3 } clnpInErrProcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of protocol procedure CLNP Error PDUs received by this entity." ::= { error 4 } clnpInErrCksums OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of checksum CLNP Error PDUs received by this entity." ::= { error 5 } clnpInErrCongests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of congestion drop CLNP Error PDUs received by this entity." ::= { error 6 } clnpInErrHdrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of header syntax CLNP Error PDUs received by this entity." ::= { error 7 } clnpInErrSegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of segmentation disallowed CLNP Error PDUs received by this entity." ::= { error 8 } clnpInErrIncomps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of incomplete PDU CLNP Error PDUs received by this entity." ::= { error 9 } clnpInErrDups OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of duplicate option CLNP Error PDUs received by this entity." ::= { error 10 } clnpInErrUnreachDsts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unreachable destination CLNP Error PDUs received by this entity." ::= { error 11 } clnpInErrUnknownDsts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unknown destination CLNP Error PDUs received by this entity." ::= { error 12 } clnpInErrSRUnspecs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unspecified source route CLNP Error PDUs received by this entity." ::= { error 13 } clnpInErrSRSyntaxes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of source route syntax CLNP Error PDUs received by this entity." ::= { error 14 } clnpInErrSRUnkAddrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of source route unknown address CLNP Error PDUs received by this entity." ::= { error 15 } clnpInErrSRBadPaths OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of source route bad path CLNP Error PDUs received by this entity." ::= { error 16 } clnpInErrHops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of hop count exceeded CLNP Error PDUs received by this entity." ::= { error 17 } clnpInErrHopReassms OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of hop count exceeded while reassembling CLNP Error PDUs received by this entity." ::= { error 18 } clnpInErrUnsOptions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unsupported option CLNP Error PDUs received by this entity." ::= { error 19 } clnpInErrUnsVersions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of version mismatch CLNP Error PDUs received by this entity." ::= { error 20 } clnpInErrUnsSecurities OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unsupported security option CLNP Error PDUs received by this entity." ::= { error 21 } clnpInErrUnsSRs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unsupported source route option CLNP Error PDUs received by this entity." ::= { error 22 } clnpInErrUnsRRs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unsupported record route option CLNP Error PDUs received by this entity." ::= { error 23 } clnpInErrInterferences OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of reassembly interference CLNP Error PDUs received by this entity." ::= { error 24 } clnpOutErrUnspecs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unspecified CLNP Error PDUs sent by this entity." ::= { error 25 } clnpOutErrProcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of protocol procedure CLNP Error PDUs sent by this entity." ::= { error 26 } clnpOutErrCksums OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of checksum CLNP Error PDUs sent by this entity." ::= { error 27 } clnpOutErrCongests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of congestion drop CLNP Error PDUs sent by this entity." ::= { error 28 } clnpOutErrHdrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of header syntax CLNP Error PDUs sent by this entity." ::= { error 29 } clnpOutErrSegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of segmentation disallowed CLNP Error PDUs sent by this entity." ::= { error 30 } clnpOutErrIncomps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of incomplete PDU CLNP Error PDUs sent by this entity." ::= { error 31 } clnpOutErrDups OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of duplicate option CLNP Error PDUs sent by this entity." ::= { error 32 } clnpOutErrUnreachDsts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unreachable destination CLNP Error PDUs sent by this entity." ::= { error 33 } clnpOutErrUnknownDsts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unknown destination CLNP Error PDUs sent by this entity." ::= { error 34 } clnpOutErrSRUnspecs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unspecified source route CLNP Error PDUs sent by this entity." ::= { error 35 } clnpOutErrSRSyntaxes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of source route syntax CLNP Error PDUs sent by this entity." ::= { error 36 } clnpOutErrSRUnkAddrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of source route unknown address CLNP Error PDUs sent by this entity." ::= { error 37 } clnpOutErrSRBadPaths OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of source route bad path CLNP Error PDUs sent by this entity." ::= { error 38 } clnpOutErrHops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of hop count exceeded CLNP Error PDUs sent by this entity." ::= { error 39 } clnpOutErrHopReassms OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of hop count exceeded while reassembling CLNP Error PDUs sent by this entity." ::= { error 40 } clnpOutErrUnsOptions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unsupported option CLNP Error PDUs sent by this entity." ::= { error 41 } clnpOutErrUnsVersions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of version mismatch CLNP Error PDUs sent by this entity." ::= { error 42 } clnpOutErrUnsSecurities OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unsupported security option CLNP Error PDUs sent by this entity." ::= { error 43 } clnpOutErrUnsSRs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unsupported source route option CLNP Error PDUs sent by this entity." ::= { error 44 } clnpOutErrUnsRRs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unsupported record route option CLNP Error PDUs sent by this entity." ::= { error 45 } clnpOutErrInterferences OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of reassembly interference CLNP Error PDUs sent by this entity." ::= { error 46 } -- the ES-IS group -- Implementation of this group is recommended for all -- systems which implement the End-System to Intermediate -- System protocol. esisESHins OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ESH PDUs received by this entity." ::= { es-is 1 } esisESHouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ESH PDUs sent by this entity." ::= { es-is 2 } esisISHins OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ISH PDUs received by this entity." ::= { es-is 3 } esisISHouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ISH PDUs sent by this entity." ::= { es-is 4 } esisRDUins OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RDU PDUs received by this entity." ::= { es-is 5 } esisRDUouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RDU PDUs sent by this entity." ::= { es-is 6 } END