-- extracted from rfc4268.txt -- at Thu Dec 1 06:40:07 2005 ENTITY-STATE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2 FROM SNMPv2-SMI DateAndTime FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF entPhysicalIndex FROM ENTITY-MIB EntityAdminState, EntityOperState, EntityUsageState, EntityAlarmStatus, EntityStandbyStatus FROM ENTITY-STATE-TC-MIB; entityStateMIB MODULE-IDENTITY LAST-UPDATED "200511220000Z" ORGANIZATION "IETF Entity MIB Working Group" CONTACT-INFO " General Discussion: entmib@ietf.org To Subscribe: http://www.ietf.org/mailman/listinfo/entmib http://www.ietf.org/html.charters/entmib-charter.html Sharon Chisholm Nortel Networks PO Box 3511 Station C Ottawa, Ont. K1Y 4H7 Canada schishol@nortel.com David T. Perkins 548 Qualbrook Ct San Jose, CA 95110 USA Phone: 408 394-8702 dperkins@snmpinfo.com " DESCRIPTION "This MIB defines a state extension to the Entity MIB. Copyright (C) The Internet Society 2005. This version of this MIB module is part of RFC 4268; see the RFC itself for full legal notices." REVISION "200511220000Z" DESCRIPTION "Initial version, published as RFC 4268." ::= { mib-2 131 } -- Entity State Objects entStateObjects OBJECT IDENTIFIER ::= { entityStateMIB 1 } entStateTable OBJECT-TYPE SYNTAX SEQUENCE OF EntStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of information about state/status of entities. This is a sparse augment of the entPhysicalTable. Entries appear in this table for values of entPhysicalClass [RFC4133] that in this implementation are able to report any of the state or status stored in this table. " ::= { entStateObjects 1 } entStateEntry OBJECT-TYPE SYNTAX EntStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "State information about this physical entity." INDEX { entPhysicalIndex } ::= { entStateTable 1 } EntStateEntry ::= SEQUENCE { entStateLastChanged DateAndTime, entStateAdmin EntityAdminState, entStateOper EntityOperState, entStateUsage EntityUsageState, entStateAlarm EntityAlarmStatus, entStateStandby EntityStandbyStatus } entStateLastChanged OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object is the date and time when the value of any of entStateAdmin, entStateOper, entStateUsage, entStateAlarm, or entStateStandby changed for this entity. If there has been no change since the last re-initialization of the local system, this object contains the date and time of local system initialization. If there has been no change since the entity was added to the local system, this object contains the date and time of the insertion." ::= { entStateEntry 1 } entStateAdmin OBJECT-TYPE SYNTAX EntityAdminState MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state for this entity. This object refers to an entities administrative permission to service both other entities within its containment hierarchy as well other users of its services defined by means outside the scope of this MIB. Setting this object to 'notSupported' will result in an 'inconsistentValue' error. For entities that do not support administrative state, all set operations will result in an 'inconsistentValue' error. Some physical entities exhibit only a subset of the remaining administrative state values. Some entities cannot be locked, and hence this object exhibits only the 'unlocked' state. Other entities cannot be shutdown gracefully, and hence this object does not exhibit the 'shuttingDown' state. A value of 'inconsistentValue' will be returned if attempts are made to set this object to values not supported by its administrative model." ::= { entStateEntry 2 } entStateOper OBJECT-TYPE SYNTAX EntityOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for this entity. Note that unlike the state model used within the Interfaces MIB [RFC2863], this object does not follow the administrative state. An administrative state of down does not predict an operational state of disabled. A value of 'testing' means that entity currently being tested and cannot therefore report whether it is operational or not. A value of 'disabled' means that an entity is totally inoperable and unable to provide service both to entities within its containment hierarchy, or to other receivers of its service as defined in ways outside the scope of this MIB. A value of 'enabled' means that an entity is fully or partially operable and able to provide service both to entities within its containment hierarchy, or to other receivers of its service as defined in ways outside the scope of this MIB. Note that some implementations may not be able to accurately report entStateOper while the entStateAdmin object has a value other than 'unlocked'. In these cases, this object MUST have a value of 'unknown'." ::= { entStateEntry 3 } entStateUsage OBJECT-TYPE SYNTAX EntityUsageState MAX-ACCESS read-only STATUS current DESCRIPTION "The usage state for this entity. This object refers to an entity's ability to service more physical entities in a containment hierarchy. A value of 'idle' means this entity is able to contain other entities but that no other entity is currently contained within this entity. A value of 'active' means that at least one entity is contained within this entity, but that it could handle more. A value of 'busy' means that the entity is unable to handle any additional entities being contained in it. Some entities will exhibit only a subset of the usage state values. Entities that are unable to ever service any entities within a containment hierarchy will always have a usage state of 'busy'. Some entities will only ever be able to support one entity within its containment hierarchy and will therefore only exhibit values of 'idle' and 'busy'." ::= { entStateEntry 4 } entStateAlarm OBJECT-TYPE SYNTAX EntityAlarmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The alarm status for this entity. It does not include the alarms raised on child components within its containment hierarchy. A value of 'unknown' means that this entity is unable to report alarm state. Note that this differs from 'indeterminate', which means that alarm state is supported and there are alarms against this entity, but the severity of some of the alarms is not known. If no bits are set, then this entity supports reporting of alarms, but there are currently no active alarms against this entity." ::= { entStateEntry 5 } entStateStandby OBJECT-TYPE SYNTAX EntityStandbyStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The standby status for this entity. Some entities will exhibit only a subset of the remaining standby state values. If this entity cannot operate in a standby role, the value of this object will always be 'providingService'." ::= { entStateEntry 6 } -- Notifications entStateNotifications OBJECT IDENTIFIER ::= { entityStateMIB 0 } entStateOperEnabled NOTIFICATION-TYPE OBJECTS { entStateAdmin, entStateAlarm } STATUS current DESCRIPTION "An entStateOperEnabled notification signifies that the SNMP entity, acting in an agent role, has detected that the entStateOper object for one of its entities has transitioned into the 'enabled' state. The entity this notification refers can be identified by extracting the entPhysicalIndex from one of the variable bindings. The entStateAdmin and entStateAlarm varbinds may be examined to find out additional information on the administrative state at the time of the operation state change as well as to find out whether there were any known alarms against the entity at that time that may explain why the physical entity has become operationally disabled." ::= { entStateNotifications 1 } entStateOperDisabled NOTIFICATION-TYPE OBJECTS { entStateAdmin, entStateAlarm } STATUS current DESCRIPTION "An entStateOperDisabled notification signifies that the SNMP entity, acting in an agent role, has detected that the entStateOper object for one of its entities has transitioned into the 'disabled' state. The entity this notification refers can be identified by extracting the entPhysicalIndex from one of the variable bindings. The entStateAdmin and entStateAlarm varbinds may be examined to find out additional information on the administrative state at the time of the operation state change as well as to find out whether there were any known alarms against the entity at that time that may affect the physical entity's ability to stay operationally enabled." ::= { entStateNotifications 2 } -- Conformance and Compliance entStateConformance OBJECT IDENTIFIER ::= { entityStateMIB 2 } entStateCompliances OBJECT IDENTIFIER ::= { entStateConformance 1 } entStateCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems supporting the Entity State MIB." MODULE -- this module MANDATORY-GROUPS { entStateGroup } GROUP entStateNotificationsGroup DESCRIPTION "This group is optional." OBJECT entStateAdmin MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { entStateCompliances 1 } entStateGroups OBJECT IDENTIFIER ::= { entStateConformance 2 } entStateGroup OBJECT-GROUP OBJECTS { entStateLastChanged, entStateAdmin, entStateOper, entStateUsage, entStateAlarm, entStateStandby } STATUS current DESCRIPTION "Standard Entity State group." ::= { entStateGroups 1} entStateNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { entStateOperEnabled, entStateOperDisabled } STATUS current DESCRIPTION "Standard Entity State Notification group." ::= { entStateGroups 2} END -- -- Copyright (C) The Internet Society (2005). -- -- This document is subject to the rights, licenses and restrictions -- contained in BCP 78, and except as set forth therein, the authors -- retain all their rights. -- -- This document and the information contained herein are provided on an -- "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS -- OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET -- ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, -- INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE -- INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED -- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -- -- Intellectual Property -- -- The IETF takes no position regarding the validity or scope of any -- Intellectual Property Rights or other rights that might be claimed to -- pertain to the implementation or use of the technology described in -- this document or the extent to which any license under such rights -- might or might not be available; nor does it represent that it has -- made any independent effort to identify any such rights. Information -- on the procedures with respect to rights in RFC documents can be -- found in BCP 78 and BCP 79. -- -- Copies of IPR disclosures made to the IETF Secretariat and any -- assurances of licenses to be made available, or the result of an -- attempt made to obtain a general license or permission for the use of -- such proprietary rights by implementers or users of this -- specification can be obtained from the IETF on-line IPR repository at -- http://www.ietf.org/ipr. -- -- The IETF invites any interested party to bring to its attention any -- copyrights, patents or patent applications, or other proprietary -- rights that may cover technology that may be required to implement -- this standard. Please address the information to the IETF at ietf- -- ipr@ietf.org. --