-- extracted from draft-nadeau-ccamp-gmpls-te-mib-01.txt -- at Fri May 14 06:20:50 2004 GMPLS-TE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32, Counter32, Counter64, TimeTicks FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TruthValue, RowStatus, RowPointer, StorageType, DisplayString, TimeStamp FROM SNMPv2-TC InterfaceIndexOrZero FROM IF-MIB MplsBitRate, MplsBurstSize, MplsInitialCreationSource, MplsLSPID, MplsTunnelIndex, MplsTunnelInstanceIndex, MplsTunnelAffinity, MplsLsrIdentifier, MplsPathIndex, MplsPathIndexOrZero FROM MPLS-TC-MIB gmplsMIB, GmplsHopAddrType, GmplsTrapEnable FROM GMPLS-TC-MIB InetAddressIPv4, InetAddressIPv6 FROM INET-ADDRESS-MIB ; gmplsTeMIB MODULE-IDENTITY LAST-UPDATED "200201251200Z" -- 25 January 2002 12:00:00 GMT "" ORGANIZATION "Common Control And Management Protocols (CCAMP) Working Group" CONTACT-INFO " Thomas D. Nadeau Postal: Cisco Systems, Inc. 250 Apollo Drive Chelmsford, MA 01824 Tel: +1-978-244-3051 Email: tnadeau@cisco.com Cheenu Srinivasan Postal: Parama Networks, Inc. 1030 Broad Street Shrewsbury, NJ 07702 Tel: +1-732-544-9120 x731 Email: cheenu@paramanet.com Adrian Farrel Postal: Movaz Networks, Inc. 7926 Jones Branch Drive McLean, VA 22102 Tel: +1-703-847-1986 Email: afarrel@movaz.com Edward Harrison Postal: Data Connection Ltd. 100 Church Street Enfield, Middlesex EN2 6BQ, United Kingdom Tel: +44-20-8366-1177 Email: eph@dataconnection.com Tim Hall Postal: Data Connection Ltd. 100 Church Street Enfield, Middlesex EN2 6BQ, United Kingdom Tel: +44-20-8366-1177 Email: timhall@dataconnection.com Email comments to the CCAMP WG Mailing List at ccamp@ops.ietf.org." DESCRIPTION "This MIB module contains managed object definitions for MPLS and GMPLS Traffic Engineering (TE)." -- Revision history. REVISION "200111111100Z" -- 11 Nov 2001 11:00:00 GMT DESCRIPTION "First revision draft version." REVISION "200201251200Z" -- 25 Jan 2002 12:00:00 GMT DESCRIPTION "Revision for compilation and work in progress." ::= { gmplsMIB 4 } -- Top level components of this MIB. -- tables, scalars gmplsTeScalars OBJECT IDENTIFIER ::= { gmplsTeMIB 1 } gmplsTeObjects OBJECT IDENTIFIER ::= { gmplsTeMIB 2 } -- traps gmplsTeNotifications OBJECT IDENTIFIER ::= { gmplsTeMIB 3 } gmplsTeNotifyPrefix OBJECT IDENTIFIER ::= { gmplsTeNotifications 0 } -- conformance gmplsTeConformance OBJECT IDENTIFIER ::= { gmplsTeMIB 4 } -- GMPLS Tunnel scalars. gmplsTunnelsConfigured OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunnels configured on this device. A tunnel is considered configured if the gmplsTunnelRowStatus is active(1)." ::= { gmplsTeScalars 1 } gmplsTunnelActive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunnels active on this device. A tunnel is considered active if the gmplsTunnelOperStatus is up(1)." ::= { gmplsTeScalars 2 } gmplsTunnelTEDistProto OBJECT-TYPE SYNTAX BITS { other (0), ospf (1), isis (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The traffic engineering distribution protocol(s) used by this LSR. Note that an LSR may support more than one distribution protocol simultaneously." ::= { gmplsTeScalars 3 } gmplsTunnelMaxHops OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of hops that can be specified for a tunnel on this device." ::= { gmplsTeScalars 4 } -- End of GMPLS Tunnel scalars. -- GMPLS tunnel next index. gmplsTunnelIndexNext OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the next appropriate value to be used for mplsTunnelIndex when creating entries in gmplsTunnelTable. If the number of unassigned entries is exhausted, a retrieval operation will return a value of 0. This object may also return a value of 0 when the LSR is unable to accept conceptual row creation, for example, if the gmplsTunnelTable is implemented as read-only. To obtain the value of mplsTunnelIndex for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { gmplsTeObjects 1 } -- End GMPLS tunnel next index. -- Begin gmplsTunnelInstanceNextTable gmplsTunnelInstanceNextTable OBJECT-TYPE SYNTAX SEQUENCE OF GmplsTunnelInstanceNextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the next available values of gmplsTunnelInstance for all values of gmplsTunnelIndex for a given pair of gmplsTunnelIngressLSRId and gmplsTunnelEgressLSRId." ::= { gmplsTeObjects 2 } gmplsTunnelInstanceNextEntry OBJECT-TYPE SYNTAX GmplsTunnelInstanceNextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents the next available gmplsTunnelInstance for a specific value of gmplsTunnelIndex for a given pair of gmplsTunnelIngressLSRId and gmplsTunnelEgressLSRId. This MIB table is indexed by gmplsTunnelHopListIndex, gmplsTunnelIngressLSRId and gmplsTunnelEgressLSRId." INDEX { gmplsTunnelIndex, gmplsTunnelIngressLSRId, gmplsTunnelEgressLSRId } ::= { gmplsTunnelInstanceNextTable 1 } GmplsTunnelInstanceNextEntry ::= SEQUENCE { gmplsTunnelInstanceNextInstance MplsTunnelInstanceIndex } gmplsTunnelInstanceNextInstance OBJECT-TYPE SYNTAX MplsTunnelInstanceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The next available gmplsTunnelInstance for the given values of gmplsTunnelIndex, gmplsTunnelIngressLSRId and gmplsTunnelEgressLSRId. A value of zero means that no further entries are available." ::= { gmplsTunnelInstanceNextEntry 1 } -- End of gmplsTunnelInstanceNextTable -- GMPLS tunnel table. gmplsTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF GmplsTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The gmplsTunnelTable allows new MPLS and GMPLS tunnels to be created between an LSR and a remote endpoint, and existing tunnels to be reconfigured or removed. Note that only point-to-point tunnel segments are supported, although multi- point-to-point and point-to-multi-point connections are supported by an LSR acting as a cross-connect. Each tunnel can thus have one out-segment originating at this LSR and/or one in-segment terminating at this LSR." ::= { gmplsTeObjects 3 } gmplsTunnelEntry OBJECT-TYPE SYNTAX GmplsTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents an MPLS or GMPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by a signaling protocol. Whenever a new entry is created with gmplsTunnelIsIf set to numbered(1) or unnumbered(2), then a corresponding entry is created in ifTable as well (see RFC 2863). The ifType of this entry is mplsTunnel(150)." REFERENCE "1. RFC 2863 - The Interfaces Group MIB, McCloghrie, K., and F. Kastenholtz, June 2000 2. RFC 1700 - Assigned Numbers, Reynolds, J. and J. Postel, Oct. 1994" INDEX { gmplsTunnelIndex, gmplsTunnelInstance, gmplsTunnelIngressLSRId, gmplsTunnelEgressLSRId } ::= { gmplsTunnelTable 1 } GmplsTunnelEntry ::= SEQUENCE { gmplsTunnelIndex MplsTunnelIndex, gmplsTunnelInstance MplsTunnelInstanceIndex, gmplsTunnelIngressLSRId MplsLsrIdentifier, gmplsTunnelEgressLSRId MplsLsrIdentifier, gmplsTunnelName DisplayString, gmplsTunnelDescr DisplayString, gmplsTunnelIsIf INTEGER, gmplsTunnelIfIndex InterfaceIndexOrZero, gmplsTunnelXCPointer RowPointer, gmplsTunnelSignallingProto INTEGER, gmplsTunnelSetupPrio Integer32, gmplsTunnelHoldingPrio Integer32, gmplsTunnelAttributes BITS, gmplsTunnelOwner MplsInitialCreationSource, gmplsTunnelLocalProtectInUse TruthValue, gmplsTunnelResourcePointer RowPointer, gmplsTunnelInstancePriority Unsigned32, gmplsTunnelHopTableIndex MplsPathIndexOrZero, gmplsTunnelARHopTableIndex MplsPathIndexOrZero, gmplsTunnelCHopTableIndex MplsPathIndexOrZero, gmplsTunnelPrimaryInstance MplsTunnelInstanceIndex, gmplsTunnelPrimaryTimeUp TimeTicks, gmplsTunnelPathChanges Counter32, gmplsTunnelLastPathChange TimeTicks, gmplsTunnelCreationTime TimeStamp, gmplsTunnelStateTransitions Counter32, gmplsTunnelIncludeAnyAffinity MplsTunnelAffinity, gmplsTunnelIncludeAllAffinity MplsTunnelAffinity, gmplsTunnelExcludeAnyAffinity MplsTunnelAffinity, gmplsTunnelPathInUse MplsPathIndexOrZero, gmplsTunnelRole INTEGER, gmplsTunnelTotalUpTime TimeTicks, gmplsTunnelInstanceUpTime TimeTicks, gmplsTunnelAdminStatus INTEGER, gmplsTunnelOperStatus INTEGER, gmplsTunnelRowStatus RowStatus, gmplsTunnelStorageType StorageType, gmplsTunnelLSPEncoding INTEGER, gmplsTunnelSwitchingType Integer32, gmplsTunnelLinkProtection BITS, gmplsTunnelGPid Unsigned32, gmplsTunnelSecondary TruthValue, gmplsTunnelDirection INTEGER, gmplsTunnelPathComp INTEGER } gmplsTunnelIndex OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies this row." ::= { gmplsTunnelEntry 1 } gmplsTunnelInstance OBJECT-TYPE SYNTAX MplsTunnelInstanceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies an instance of a tunnel. It is useful to identify multiple instances of tunnels for the purposes of backup and parallel tunnels." ::= { gmplsTunnelEntry 2 } gmplsTunnelIngressLSRId OBJECT-TYPE SYNTAX MplsLsrIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The purpose of this object is to uniquely identity a tunnel within a network. When the signaling protocol is rsvp(2) this value SHOULD mimic the Extended Tunnel Id field in the SESSION object. When the signaling protocol is crldp(3) this value SHOULD mimic the Ingress LSR Router ID field in the LSPID TLV object." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, Internet Draft , August 2001., 2. Constraint-Based LSP Setup using LDP, Jamoussi, Internet Draft , November 2001." ::= { gmplsTunnelEntry 3 } gmplsTunnelEgressLSRId OBJECT-TYPE SYNTAX MplsLsrIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the egress LSR ID." ::= { gmplsTunnelEntry 4 } gmplsTunnelName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSRs console port. If gmplsTunnelIsIf is set to numbered(1) or unnumbered(2) then the ifName of the interface corresponding to this tunnel should have a value equal to gmplsTunnelName. Also see the description of ifName in RFC 2863." REFERENCE "RFC 2863 - The Interfaces Group MIB, McCloghrie, K., and F. Kastenholtz, June 2000" ::= { gmplsTunnelEntry 5 } gmplsTunnelDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "A textual string containing information about the tunnel. If there is no description this object contains a zero length string." ::= { gmplsTunnelEntry 6 } gmplsTunnelIsIf OBJECT-TYPE SYNTAX INTEGER { no (0), numbered (1), unnumbered (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Denotes whether or not this tunnel corresponds to an interface represented in the interfaces group table. Note that if this variable is set to numbered (1) or unnumbered(2) then the ifName of the interface corresponding to this tunnel should have a value equal to gmplsTunnelName. Also see the description of ifName in RFC 2863. If this variable is set to unnumbered(2) the originating LSR adds an LSP_TUNNEL_INTERFACE_ID object to the outgoing Path message. This object contains information that is only used by the terminating LSR." REFERENCE "RFC 2863 - The Interfaces Group MIB, McCloghrie, K., and F. Kastenholtz, June 2000. draft-ietf-mpls-crldp-unnum-02.txt - Signalling Unnumbered Links in CR-LDP, Kompella, K., Rekhter, Y. and Kullberg, A., Sep 2001. draft-ietf-mpls-rsvp-unnum-02.txt - Signalling Unnumbered Links in RSVP-TE, Kompella, K., and Rekhter, Y., Aug 2001." DEFVAL { no } ::= { gmplsTunnelEntry 7 } gmplsTunnelIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "If gmplsTunnelIsIf is set to numbered(1) or unnumbered(2), then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfaces table. Otherwise this variable should contain the value of zero indicating that a valid ifIndex was not assigned to this tunnel interface. Some implementations may choose to automatically supply the value of this object so as to coordinate interface indexes across all interfaces. In this case, this object could be implemented as read-only." REFERENCE "RFC 2863 - The Interfaces Group MIB, McCloghrie, K., and F. Kastenholtz, June 2000" ::= { gmplsTunnelEntry 8 } gmplsTunnelXCPointer OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "This variable points to a row in the gmplsXCTable. This table identifies the segments that compose this tunnel, their characteristics, and relationships to each other. A value of zeroDotZero indicates that no LSP has been associated with this tunnel yet." REFERENCE "Srinivasan, C., and T. Nadeau, GMPLS Label Switching Router Management Information Base Using SMIv2, Internet Draft , January 2002." ::= { gmplsTunnelEntry 9 } gmplsTunnelSignallingProto OBJECT-TYPE SYNTAX INTEGER { none(1), rsvp(2), crldp(3), other(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The signaling protocol, if any, which was used to setup this tunnel. Note that the distinction between the use of the MPLS and GMPLS variants of the signaling protocols is made through the setting of the gmplsTunnelLspEncoding object." DEFVAL { none } ::= { gmplsTunnelEntry 10 } gmplsTunnelSetupPrio OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the setup priority of this tunnel." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001., 2. Constraint-Based LSP Setup using LDP, Jamoussi, Internet Draft , November 2001." ::= { gmplsTunnelEntry 11 } gmplsTunnelHoldingPrio OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the holding priority for this tunnel." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001., 2. Constraint-Based LSP Setup using LDP, Jamoussi, Internet Draft , November 2001." ::= { gmplsTunnelEntry 12 } gmplsTunnelAttributes OBJECT-TYPE SYNTAX BITS { localProtectionDesired (0), labelRecordingDesired (1), seStyleDesired (2), isPersistent (3), isPinned (4), recordRoute(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This bitmask indicates optional parameters for this tunnel. Some of these bits map direct to signaled values (for example SESSION_ATTRIBUTES flags in RSVP-TE). Others describe qualities of the tunnel. The following describes these bitfields: localProtectionDesired This flag permits transit routers to use a local repair mechanism which may result in violation of the explicit route object. When a fault is detected on an adjacent downstream link or node, a transit router can reroute traffic for fast service restoration. labelRecordingDesired This flag indicates that label information should be included when doing a route record. This bit is not valid unless the recordRoute bit is set. seStyleDesired This flag indicates that the tunnel ingress node may choose to reroute this tunnel without tearing it down. When signaling uses RSVP, a tunnel egress node SHOULD use the SE Style when responding with a Resv message. isPersistent Indicates whether this tunnel should be restored automatically after a failure occurs. isPinned This flag indicates whether the loose- routed hops of this tunnel are to be pinned. recordRoute This flag indicates whether or not the signaling protocol should remember the tunnel path after it has been signaled." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001." DEFVAL { 0 } ::= { gmplsTunnelEntry 13 } gmplsTunnelOwner OBJECT-TYPE SYNTAX MplsInitialCreationSource MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates which protocol created and is responsible for managing this tunnel. Values rsvp(4) and crldp(5) should not be used at the head-end of a tunnel since the tunnel will be created through some form of management. The value ldp (3) should never be used." ::= { gmplsTunnelEntry 14 } gmplsTunnelLocalProtectInUse OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates that the local repair mechanism is in use to maintain this tunnel (usually in the face of an outage of the link it was previously routed over)." ::= { gmplsTunnelEntry 15 } gmplsTunnelResourcePointer OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "This variable represents a pointer to the traffic parameter specification for this tunnel. This value may point at an entry in the gmplsTunnelResourceEntry to indicate which gmplsTunnelResourceEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. A value of zeroDotZero indicates best-effort treatment. By having the same value of this object, two or more segments can indicate resource sharing." ::= { gmplsTunnelEntry 16 } gmplsTunnelInstancePriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instances is defined as a set of tunnels with the same gmplsTunnelIndex in this table, but with a different gmplsTunnelInstance. Tunnel group priorities are used to denote the priority at which a particular tunnel instance will supercede another. Instances of tunnels containing the same gmplsTunnelInstancePriority will be used for load sharing." DEFVAL { 0 } ::= { gmplsTunnelEntry 17 } gmplsTunnelHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Index into the gmplsTunnelHopTable entry that specifies the explicit route hops for this tunnel." ::= { gmplsTunnelEntry 18 } gmplsTunnelARHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Index into the gmplsTunnelARHopTable entry that specifies the actual hops traversed by the tunnel." ::= { gmplsTunnelEntry 19 } gmplsTunnelCHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Index into the gmplsTunnelCHopTable entry that specifies the computed hops traversed by the tunnel." ::= { gmplsTunnelEntry 20 } gmplsTunnelPrimaryInstance OBJECT-TYPE SYNTAX MplsTunnelInstanceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the instance index of the primary instance of this tunnel." ::= { gmplsTunnelEntry 21 } gmplsTunnelPrimaryTimeUp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in gmplsTunnelPrimaryInstance." ::= { gmplsTunnelEntry 22 } gmplsTunnelPathChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the number of times the path has changed for this tunnel." ::= { gmplsTunnelEntry 23 } gmplsTunnelLastPathChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the time since the last path change for this tunnel." ::= { gmplsTunnelEntry 24 } gmplsTunnelCreationTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the value of SysUpTime when the first instance of this tunnel came into existence." ::= { gmplsTunnelEntry 25 } gmplsTunnelStateTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the number of times the state of this tunnel instance has changed." ::= { gmplsTunnelEntry 26 } gmplsTunnelIncludeAnyAffinity OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-create STATUS current DESCRIPTION "A link satisfies the include-any constraint if and only if the constraint is zero, or the link and the constraint have a resource class in common." REFERENCE "RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001." ::= { gmplsTunnelEntry 27 } gmplsTunnelIncludeAllAffinity OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-create STATUS current DESCRIPTION "A link satisfies the include-all constraint if and only if the link contains all of the administrative groups specified in the constraint." REFERENCE "RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001." ::= { gmplsTunnelEntry 28 } gmplsTunnelExcludeAnyAffinity OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-create STATUS current DESCRIPTION "A link satisfies the exclude-any constraint if and only if the link contains none of the administrative groups specified in the constraint." REFERENCE "RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001." ::= { gmplsTunnelEntry 29 } gmplsTunnelPathInUse OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This value denotes the configured path that was chosen for this tunnel. This value reflects the secondary index into the gmplsTunnelHopTable. This path may not exactly match the one in the ARHopTable due to the fact that some CSPF modification may have taken place. See the gmplsARHopTable for the actual path being taken by the tunnel. A value of zero denotes that no path is currently in use or available." ::= { gmplsTunnelEntry 30 } gmplsTunnelRole OBJECT-TYPE SYNTAX INTEGER { head(1), transit(2), tail(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value MUST be set to transit(2) at transit points along the tunnel, if transit points are supported. This value MUST be set to tail(3) at the terminating point of the tunnel if tunnel tails are supported." ::= { gmplsTunnelEntry 31 } gmplsTunnelTotalUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST return a value of 0." ::= { gmplsTunnelEntry 32 } gmplsTunnelInstanceUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This value identifies the total time that this tunnel instance's operStatus has been Up(1)." ::= { gmplsTunnelEntry 33 } gmplsTunnelAdminStatus OBJECT-TYPE SYNTAX INTEGER { -- ready to pass packets up(1), down(2), -- in some test mode testing(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the desired operational status of this tunnel." ::= { gmplsTunnelEntry 34 } gmplsTunnelOperStatus OBJECT-TYPE SYNTAX INTEGER { -- ready to pass packets up(1), down(2), -- in some test mode testing(3), -- status cannot be determined unknown(4), dormant(5), -- some component is missing notPresent(6), -- down due to the state of -- lower layer interfaces lowerLayerDown(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel." ::= { gmplsTunnelEntry 35 } gmplsTunnelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table." ::= { gmplsTunnelEntry 36 } gmplsTunnelStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the storage type for this table entry. When set to 'permanent', the entire row is to be stored." ::= { gmplsTunnelEntry 37 } gmplsTunnelLSPEncoding OBJECT-TYPE SYNTAX INTEGER { tunnelLspNotGmpls (0), tunnelLspPacket (1), tunnelLspEthernetV2Dix (2), tunnelLspAnsiPdh (3), tunnelLspEtsiPdh (4), tunnelLspSdhItutG707 (5), tunnelLspSonetAnsiT1105 (6), tunnelLspDigitalWrapper (7), tunnelLspLambda (8), tunnelLspFiber (9), tunnelLspEthernet8023 (10), tunnelLspFiberChannel (11) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the encoding of the LSP being requested. It is only required when a generalized label request will be used for this LSP. A value of 0 in this object indicates that a generalized label request will not be used to set up this LSP which means that MPLS procedures will be used. Ed Note: Should these be assigned and maintained by IANA?" ::= { gmplsTunnelEntry 38 } gmplsTunnelSwitchingType OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the type of switching that should be performed on a particular link. This field is needed for links that advertise more than one type of switching capability. Values of this field are as the Switching Capability field defined in [GMPLS-RTG] This object is only used if gmplsTunnelLSPEncoding is not set to 0. Ed Note: Should these values be assigned and maintained by IANA or imported from another MIB? Currently the following values are valid: unknown (0), psc1 (1), psc2 (2), psc3 (3), psc4 (4), l2sc (51), tdm (100), lsc (150), fsc (200)" ::= { gmplsTunnelEntry 39 } gmplsTunnelLinkProtection OBJECT-TYPE SYNTAX BITS { extraTraffic(1), unprotected(2), shared (3), dedicatedOneToOne (4), dedicatedOnePlusOne(5), enhanced(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This bitmask indicates the level of link protection required. A value of zero (no bits set) indicates that any protection may be used. This object is only used if gmplsTunnelLSPEncoding is not set to 0. The following describes these bitfields: extraTraffic Indicates that the LSP should use links that are protecting other (primary) traffic. Such LSPs may be preempted when the links carrying the (primary) traffic being protected fail. unprotected Indicates that the LSP should not use any link layer protection. shared Indicates that a shared link layer protection scheme, such as 1:N protection, should be used to support the LSP. dedicatedOneToOne Indicates that a dedicated link layer protection scheme, i.e., 1:1 protection, should be used to support the LSP. dedicatedOnePlusOne Indicates that a dedicated link layer protection scheme, i.e., 1+1 protection, should be used to support the LSP. enhanced Indicates that a protection scheme that is more reliable than Dedicated 1+1 should be used, e.g., 4 fiber BLSR/MS-SPRING." ::= { gmplsTunnelEntry 40 } gmplsTunnelGPid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the payload carried by the LSP. It is only required when GMPLS will be used for this LSP. This object is only used if gmplsTunnelLSPEncoding is not set to 0. Ed note: Should IANA maintain these values? Is there a better way of doing this? Say, having an enum for these values, plus another bit mask for the ethertypes and a flag to tell which to use? Currently the following values are valid. unknown(0), asynchE4(5), asynchDS3T3(6), asynchE3(7), bitsynchE3(8), bytesynchE3(9), asynchDS2T2(10), bitsynchDS2T2(11), asynchE1(13), bytesynchE1(14), bytesynch31ByDS0(15), asynchDS1T1(16), bitsynchDS1T1(17), bytesynchDS1T1(18), VC11VC12(19), ds1SFAsynch(22), ds1ESFAsynch(23), ds3M23Asynch(24), ds3CBitParityAsynch(25), vt(26), sts(27), posNoScrambe16BitCrc(28), posNoScrambe32BitCrc(29), posScrambe16BitCrc(30), posScrambe32BitCrc(31), atm(32) ethernet(33), sdh(34), sonet(35), digitalwrapper(36), lambda(37), etsiPdh (38), ansiPdh (39), lapsSdh (40), fddi (41), dqdb (42), fiberChannel3 (43)" ::= { gmplsTunnelEntry 41 } gmplsTunnelSecondary OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates that the requested LSP is a secondary LSP. This object is only used if gmplsTunnelLSPEncoding is not set to 0." DEFVAL { false } ::= { gmplsTunnelEntry 42 } gmplsTunnelDirection OBJECT-TYPE SYNTAX INTEGER { forward (0), bidirectional (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this tunnel carries forward data (is unidirectional) or is bidirectional. By default, tunnels are unidirectional." DEFVAL { forward } ::= { gmplsTunnelEntry 43 } gmplsTunnelPathComp OBJECT-TYPE SYNTAX INTEGER { dynamicFull(1),-- CSPF fully computed explicit(2),-- fully specified path dynamicPartial(3) -- CSPF partially computed } MAX-ACCESS read-create STATUS current DESCRIPTION "This value instructs the source node on how to perform path computation on the explicit route specified by the associated entries in the gmplsTunnelHopTable. dynamicFull The user specifies at least the source and destination of the path and expects that the CSPF will calculate the remainder of the path. explicit The user specifies the entire path for the tunnel to take. This path may contain strict or loose hops. Evaluation of the explicit route will be performed hop by hop through the network. dynamicPartial The user specifies at least the source and destination of the path and expects that the CSPF will calculate the remainder of the path. The path computed by CSPF is allowed to be only partially computed allowing the remainder of the path to be filled in across the network." DEFVAL { explicit } ::= { gmplsTunnelEntry 44 } -- End of gmplsTunnelTable -- Begin gmplsTunnelHopPathOptionIndexNextTable gmplsTunnelHopPathOptionIndexNextTable OBJECT-TYPE SYNTAX SEQUENCE OF GmplsTunnelHopPathOptionIndexNextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the next available values of gmplsTunnelHopPathOptionIndex for all values of gmplsTunnelHopListIndex." ::= { gmplsTeObjects 4 } gmplsTunnelHopPathOptionIndexNextEntry OBJECT-TYPE SYNTAX GmplsTunnelHopPathOptionIndexNextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents the next available gmplsTunnelHopPathOptionIndex for a specific value of gmplsTunnelHopListIndex. This MIB table is indexed by gmplsTunnelHopListIndex." INDEX { gmplsTunnelHopListIndex } ::= { gmplsTunnelHopPathOptionIndexNextTable 1 } GmplsTunnelHopPathOptionIndexNextEntry ::= SEQUENCE { gmplsTunnelHopPathOptionIndexNextIndex MplsPathIndexOrZero } gmplsTunnelHopPathOptionIndexNextIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The next available gmplsTunnelHopPathOptionIndex for the given value of gmplsTunnelHopListIndex. A value of zero means that no further entries are available." ::= { gmplsTunnelHopPathOptionIndexNextEntry 1 } -- End of gmplsTunnelHopPathOptionIndexNextTable -- Begin gmplsTunnelHopIndexNextTable gmplsTunnelHopIndexNextTable OBJECT-TYPE SYNTAX SEQUENCE OF GmplsTunnelHopIndexNextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the next available values of gmplsTunnelHopIndex for all parings of gmplsTunnelHopListIndex and gmplsTunnelHopPathOptionIndex, that is for all entries in the gmplsTunnelHopTable." ::= { gmplsTeObjects 5 } gmplsTunnelHopIndexNextEntry OBJECT-TYPE SYNTAX GmplsTunnelHopIndexNextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents the next available gmplsTunnelHopIndex for a specific paring of gmplsTunnelHopListIndex and gmplsTunnelHopPathOptionIndex. This MIB table is indexed by gmplsTunnelHopListIndex." INDEX { gmplsTunnelHopListIndex, gmplsTunnelHopPathOptionIndex } ::= { gmplsTunnelHopIndexNextTable 1 } GmplsTunnelHopIndexNextEntry ::= SEQUENCE { gmplsTunnelHopIndexNextIndex MplsPathIndexOrZero } gmplsTunnelHopIndexNextIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The next available gmplsTunnelHopIndex for the given paring of gmplsTunnelHopListIndex and gmplsTunnelHopPathOptionIndex. A value of zero means that no further entries are available." ::= { gmplsTunnelHopIndexNextEntry 1 } -- End of gmplsTunnelHopIndexNextTable -- Begin gmplsTunnelHopTable gmplsTunnelHopListIndexNext OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for gmplsTunnelHopListIndex when creating entries in the gmplsTunnelHopTable. If the number of unassigned entries is exhausted, a retrieval operation will return a value of 0. This object may also return a value of 0 when the LSR is unable to accept conceptual row creation, for example, if the mplsTunnelHopTable is implemented as read-only. To obtain the value of gmplsTunnelHopListIndex for a new entry in the gmplsTunnelHopTable, the manager issues a management protocol retrieval operation to obtain the current value of gmplsTunnelHopIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { gmplsTeObjects 6 } gmplsTunnelHopTable OBJECT-TYPE SYNTAX SEQUENCE OF GmplsTunnelHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The gmplsTunnelHopTable is used to indicate the explicit labels and hops to be used for an MPLS or GMPLS tunnel defined in gmplsTunnelTable, when it is established using signaling. Each row in this table is indexed by gmplsTunnelHopListIndex. Each row also has a secondary index gmplsTunnelHopIndex corresponding to the next hop that this row corresponds to. The first row in the table is the first hop after the origination point of the tunnel. In case we want to specify a particular interface on the originating LSR of an outgoing tunnel by which we want packets to exit the LSR, we specify this as the first hop for this tunnel in gmplsTunnelHopTable. Note that some rows encode objects that are only valid for GMPLS tunnels." ::= { gmplsTeObjects 7 } gmplsTunnelHopEntry OBJECT-TYPE SYNTAX GmplsTunnelHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents a tunnel hop. An entry is created by a network administrator for signaled an ERLSP to be set up by a signaling protocol." INDEX { gmplsTunnelHopListIndex, gmplsTunnelHopPathOptionIndex, gmplsTunnelHopIndex } ::= { gmplsTunnelHopTable 1 } GmplsTunnelHopEntry ::= SEQUENCE { gmplsTunnelHopListIndex MplsPathIndex, gmplsTunnelHopPathOptionIndex MplsPathIndex, gmplsTunnelHopIndex MplsPathIndex, gmplsTunnelHopAddrType GmplsHopAddrType, gmplsTunnelHopIpv4Addr InetAddressIPv4, gmplsTunnelHopIpv4PrefixLen Unsigned32, gmplsTunnelHopIpv6Addr InetAddressIPv6, gmplsTunnelHopIpv6PrefixLen Unsigned32, gmplsTunnelHopAsNumber Unsigned32, gmplsTunnelHopLspId MplsLSPID, gmplsTunnelHopType INTEGER, gmplsTunnelHopIncludeExclude INTEGER, gmplsTunnelHopPathOptionName DisplayString, gmplsTunnelHopRowStatus RowStatus, gmplsTunnelHopStorageType StorageType, gmplsTunnelHopLabelStatuses BITS, gmplsTunnelHopExplicitLabel Unsigned32, gmplsTunnelHopExplicitReverseLabel Unsigned32, gmplsTunnelHopUnnumberedInterface InterfaceIndexOrZero } gmplsTunnelHopListIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Primary index into this table identifying a particular explicit route object." ::= { gmplsTunnelHopEntry 1 } gmplsTunnelHopPathOptionIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Secondary index into this table identifying a particular group of hops representing a particular configured path. This is otherwise known as a path option." ::= { gmplsTunnelHopEntry 2 } gmplsTunnelHopIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Secondary index into this table identifying a particular hop." ::= { gmplsTunnelHopEntry 3 } gmplsTunnelHopAddrType OBJECT-TYPE SYNTAX GmplsHopAddrType MAX-ACCESS read-create STATUS current DESCRIPTION "Denotes the type of this tunnel hop entry." DEFVAL { ipV4 } ::= { gmplsTunnelHopEntry 4 } gmplsTunnelHopIpv4Addr OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-create STATUS current DESCRIPTION "If gmplsTunnelHopAddrType is set to ipV4(1), then this value will contain the IPv4 address of this hop. If gmplsTunnelHopAddrType is set to lspid(4), then this value will contain the Ingress LSR ID of the Tunnel. If gmplsTunnelHopAddrType is set to unnumberedIpV4(6) then this value will contain LSR ID of the router on which the unnumbered interface resides. This object is otherwise insignificant and should contain a value of 0." ::= { gmplsTunnelHopEntry 5 } gmplsTunnelHopIpv4PrefixLen OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "If gmplsTunnelHopAddrType is ipV4(1), then the prefix length for this hop's IPv4 address is contained herein. This object is otherwise insignificant and should contain a value of 0." ::= { gmplsTunnelHopEntry 6 } gmplsTunnelHopIpv6Addr OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-create STATUS current DESCRIPTION "If gmplsTunnelHopAddrType is set to ipV6(2), then this value will contain the IPv6 address of this hop. If gmplsTunnelHopAddrType is set to lspidIpV6(5), then this value will contain the Ingress LSR ID of the Tunnel. If gmplsTunnelHopAddrType is set to unnumberedIpV6(7) then this value will contain LSR ID of the router on which the unnumbered interface resides. This object is otherwise insignificant and should contain a value of 0." ::= { gmplsTunnelHopEntry 7 } gmplsTunnelHopIpv6PrefixLen OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "If gmplsTunnelHopAddrType is set to ipV6(2), this value will contain the prefix length for this hop's IPv6 address. This object is otherwise insignificant and should contain a value of 0." ::= { gmplsTunnelHopEntry 8 } gmplsTunnelHopAsNumber OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "If gmplsTunnelHopAddrType is set to asNumber(3), then this value will contain the AS number of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact." ::= { gmplsTunnelHopEntry 9 } gmplsTunnelHopLspId OBJECT-TYPE SYNTAX MplsLSPID MAX-ACCESS read-create STATUS current DESCRIPTION "If gmplsTunnelHopAddrType is set to lspid(4) or lspidIpV6(5), then this value will contain the LSPID of a tunnel to use for this hop. The tunnel being configured is tunneled through this hop (using label stacking). This object is otherwise insignificant and should contain a value of 0 to indicate this fact. Note that not all signaling protocols include the facility to signal this type of explicit hop." ::= { gmplsTunnelHopEntry 10 } gmplsTunnelHopType OBJECT-TYPE SYNTAX INTEGER { strict(1), loose(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Denotes whether this tunnel hop is routed in a strict or loose fashion." DEFVAL { strict } ::= { gmplsTunnelHopEntry 11 } gmplsTunnelHopIncludeExclude OBJECT-TYPE SYNTAX INTEGER { include(1), exclude(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "If this value is set to include(1), then this indicates that this hop must be included in the tunnel's path. If this value is set to exclude(2), then this hop must be avoided when calculating the path for this tunnel. The default value of this object is include(1), so that by default all indicated hops are included in the CSPF path computation." DEFVAL { include } ::= { gmplsTunnelHopEntry 12 } gmplsTunnelHopPathOptionName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The description of this series of hops as they relate to the specified path option." ::= { gmplsTunnelHopEntry 13 } gmplsTunnelHopRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table." ::= { gmplsTunnelHopEntry 14 } gmplsTunnelHopStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the storage type for this table entry. When set to 'permanent', the entire row is to be stored." ::= { gmplsTunnelHopEntry 15 } gmplsTunnelHopLabelStatuses OBJECT-TYPE SYNTAX BITS { forwardPresent (0), reversePresent (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This bitmask indicates the presence and status of labels indicated by the gmplsTunnelHopExplicitLabel and gmplsTunnelHopExplicitReverseLabel objects. For the Present bits, a set bit indicates that a label is present for this hop in the route." ::= { gmplsTunnelHopEntry 16 } gmplsTunnelHopExplicitLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the row entry in the gmplsLabelTabel that defines the explicit label to use in the explicit route as the forward path label at this point. This value only has meaning if the forwardPresent bit of gmplsTunnelHopLabelStatuses is set. This variable is only valid for settings of gmplsTunnelHopAddrType which may be associated with a forward path label. Note that in implementations where the label may be encoded within a 32 bit integer and where gmplsLabelTable is not implemented, this object may directly contain the label value to use." ::= { gmplsTunnelHopEntry 17 } gmplsTunnelHopExplicitReverseLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the row entry in the gmplsLabelTabel that defines the explicit label to use in the explicit route as the reverse path label at this point. This value only has meaning if the reversePresent bit of gmplsTunnelHopLabelStatuses is set. This variable is only valid for settings of gmplsTunnelHopAddrType which may be associated with a reverse path label. Note that in implementations where the label may be encoded within a 32 bit integer and where gmplsLabelTable is not implemented, this object may directly contain the label value to use." ::= { gmplsTunnelHopEntry 18 } gmplsTunnelHopUnnumberedInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interface index of the unnumbered interface to use when setting up the LSP. Only has value when gmplsTunnelHopAddrType is set to unnumberedIfIpV4(6) or unnumberedIfIpV6(7) in which case the corresponding gmplsTunnelHopIpv4Addr or gmplsTunnelHopIpv6Addr variable must contain an LSR id." ::= { gmplsTunnelHopEntry 19 } -- End of gmplsTunnelHopTable -- Begin of gmplsTunnelResourceTable gmplsTunnelResourceIndexNext OBJECT-TYPE SYNTAX Unsigned32 (0.. 2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the next appropriate value to be used for gmplsTunnelResourceIndex when creating entries in the mplsTunnelResourceTable. If the number of unassigned entries is exhausted, a retrieval operation will return a value of 0. This object may also return a value of 0 when the LSR is unable to accept conceptual row creation, for example, if the gmplsTunnelTable is implemented as read-only. To obtain the gmplsTunnelResourceIndex value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { gmplsTeObjects 8 } gmplsTunnelResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF GmplsTunnelResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The gmplsTunnelResourceTable allows a manager to specify which resources are desired for an MPLS tunnel. This table also allows several tunnels to point to a single entry in this table, implying that these tunnels should share resources." ::= { gmplsTeObjects 9 } gmplsTunnelResourceEntry OBJECT-TYPE SYNTAX GmplsTunnelResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents a set of resources for a GMPLS or MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by a signaling protocol." INDEX{ gmplsTunnelResourceIndex } ::= { gmplsTunnelResourceTable 1 } GmplsTunnelResourceEntry ::= SEQUENCE { gmplsTunnelResourceIndex Unsigned32, gmplsTunnelResourceMaxRate MplsBitRate, gmplsTunnelResourceMeanRate MplsBitRate, gmplsTunnelResourceMaxBurstSize MplsBurstSize, gmplsTunnelResourceMeanBurstSize MplsBurstSize, gmplsTunnelResourceExcessBurstSize MplsBurstSize, gmplsTunnelResourceFrequency INTEGER, gmplsTunnelResourceWeight Unsigned32, gmplsTunnelResourceRowStatus RowStatus, gmplsTunnelResourceStorageType StorageType } gmplsTunnelResourceIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies this row." ::= { gmplsTunnelResourceEntry 1 } gmplsTunnelResourceMaxRate OBJECT-TYPE SYNTAX MplsBitRate UNITS "bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum rate in bits/second. Note that setting gmplsTunnelResourceMaxRate, gmplsTunnelResourceMeanRate, and gmplsTunnelResourceMaxBurstSize to 0 indicates best-effort treatment. This object is copied to an instance of gmplsTrafficParamMaxRate in gmplsTrafficParamTable the OID of which is copied into the corresponding gmplsInSegmentTrafficParamPtr." REFERENCE "T. Nadeau et al., GMPLS Label Switching Router Management Information Base Using SMIv2, Internet Draft , January 2002." ::= { gmplsTunnelResourceEntry 2 } gmplsTunnelResourceMeanRate OBJECT-TYPE SYNTAX MplsBitRate UNITS "bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "This object is copied into an instance of gmplsTrafficParamMeanRate in the gmplsTrafficParamTable. The OID of this table entry is then copied into the corresponding gmplsInSegmentTrafficParamPtr. When resource allocation is performed as requested by this TSpec object, it is copied into an entry in gmplsTrafficParamTable [GMPLSLSRMIB]: gmplsTunnelInMeanRate to gmplsTrafficParamMeanRate. The OID of this entry is copied to gmplsInSegmentTrafficParamPtr of the corresponding in-segment entry." REFERENCE "T. Nadeau et al., GMPLS Label Switching Router Management Information Base Using SMIv2, Internet Draft , January 2002." ::= { gmplsTunnelResourceEntry 3 } gmplsTunnelResourceMaxBurstSize OBJECT-TYPE SYNTAX MplsBurstSize UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum burst size in bytes. This object is copied to gmplsInSegmentMaxBurstSize of the corresponding in-segment. When resource allocation is performed as requested by this TSpec object, it is copied into an entry in gmplsTrafficParamTable [LSRMIB]: gmplsTunnelInMaxBurstSize to gmplsTrafficParamMaxBurstSize. The OID of this entry is copied to gmplsInSegmentTrafficParamPtr of the corresponding in-segment entry." REFERENCE "T. Nadeau et al., GMPLS Label Switching Router Management Information Base Using SMIv2, Internet Draft , January 2002." ::= { gmplsTunnelResourceEntry 4 } gmplsTunnelResourceMeanBurstSize OBJECT-TYPE SYNTAX MplsBurstSize UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The mean burst size in bytes. The implementations which do not implement this variable must return 0 for this value and must not allow a user to set this value." ::= { gmplsTunnelResourceEntry 5 } gmplsTunnelResourceExcessBurstSize OBJECT-TYPE SYNTAX MplsBurstSize UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The Excess burst size in bytes. The implementations which do not implement this variable must return 0 for this value and must not allow a user to set this value." REFERENCE "CR-LDP Specification, Section 4.3." ::= { gmplsTunnelResourceEntry 6 } gmplsTunnelResourceFrequency OBJECT-TYPE SYNTAX INTEGER { unspecified(1), frequent(2), veryFrequent(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The granularity of the availability of committed rate. The implementations which do not implement this variable must return unspecified(1) for this value and must not allow a user to set this value." REFERENCE "CR-LDP Specification, Section 4.3." ::= { gmplsTunnelResourceEntry 7 } gmplsTunnelResourceWeight OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The relative weight for using excess bandwidth above its committed rate. The value of 0 means that weight is not applicable for the CR-LSP." REFERENCE "CR-LDP Specification, Section 4.3." ::= { gmplsTunnelResourceEntry 8 } gmplsTunnelResourceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table." ::= { gmplsTunnelResourceEntry 9 } gmplsTunnelResourceStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the storage type for this table entry. When set to 'permanent', the entire row is to be stored." ::= { gmplsTunnelResourceEntry 10 } -- End gmplsTunnelResourceTable -- Tunnel Actual Route Hop table. gmplsTunnelARHopTable OBJECT-TYPE SYNTAX SEQUENCE OF GmplsTunnelARHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The gmplsTunnelARHopTable is used to indicate the hops, strict or loose, for a GMPLS or MPLS tunnel defined in gmplsTunnelTable, as reported by the signaling protocol, for the outgoing direction of the tunnel. Each row in this table is indexed by gmplsTunnelARHopListIndex. Each row also has a secondary index gmplsTunnelARHopIndex, corresponding to the next hop that this row corresponds to. The first row in the table is the first hop after the origination point of the tunnel. In case we want to specify a particular interface on the originating LSR of an outgoing tunnel by which we want packets to exit the LSR, we specify this as the first hop for this tunnel in gmplsTunnelARHopTable. Please note that since the information necessary to build entries within this table is not provided by some signaling protocols, implementation of this table is optional. Furthermore, since the information in this table is actually provided by the signaling protocol after the path has been set-up, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as read-only." ::= { gmplsTeObjects 10 } gmplsTunnelARHopEntry OBJECT-TYPE SYNTAX GmplsTunnelARHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents a tunnel hop. An entry is created by the signaling protocol for a signaled ERLSP set up by the signaling protocol." INDEX { gmplsTunnelARHopListIndex, gmplsTunnelARHopIndex } ::= { gmplsTunnelARHopTable 1 } GmplsTunnelARHopEntry ::= SEQUENCE { gmplsTunnelARHopListIndex MplsPathIndex, gmplsTunnelARHopIndex MplsPathIndex, gmplsTunnelARHopAddrType GmplsHopAddrType, gmplsTunnelARHopIpv4Addr InetAddressIPv4, gmplsTunnelARHopIpv4PrefixLen Unsigned32, gmplsTunnelARHopIpv6Addr InetAddressIPv6, gmplsTunnelARHopIpv6PrefixLen Unsigned32, gmplsTunnelARHopAsNumber Unsigned32, gmplsTunnelARHopLspId MplsLSPID, gmplsTunnelARHopLabelStatuses BITS, gmplsTunnelARHopExplicitLabel Unsigned32, gmplsTunnelARHopExplicitReverseLabel Unsigned32, gmplsTunnelARHopUnnumberedInterface InterfaceIndexOrZero, gmplsTunnelARHopProtection BITS } gmplsTunnelARHopListIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Primary index into this table identifying a particular recorded hop list." ::= { gmplsTunnelARHopEntry 1 } gmplsTunnelARHopIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Secondary index into this table identifying the particular hop." ::= { gmplsTunnelARHopEntry 2 } gmplsTunnelARHopAddrType OBJECT-TYPE SYNTAX GmplsHopAddrType MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes the address type of this tunnel hop. Only the values ipV4(1), ipV6(2), unnumberedIfIpV4(6) and unnumberedIfIpV6(7) will be seen for this object." DEFVAL { ipV4 } ::= { gmplsTunnelARHopEntry 3 } gmplsTunnelARHopIpv4Addr OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-only STATUS current DESCRIPTION "If gmplsTunnelARHopAddrType is set to ipV4(1), then this value will contain the IPv4 address of this hop. This object is otherwise insignificant and should contain a value of 0." ::= { gmplsTunnelARHopEntry 4 } gmplsTunnelARHopIpv4PrefixLen OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "If gmplsTunnelARHopAddrType is ipV4(1), then the prefix length for this hop's IPv4 address is contained herein. This object is otherwise insignificant and should contain a value of 0." ::= { gmplsTunnelARHopEntry 5 } gmplsTunnelARHopIpv6Addr OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-only STATUS current DESCRIPTION "If the gmplsTunnelARHopAddrType is set to ipV6(2), then this variable contains the IPv6 address of this hop. This object is otherwise insignificant and should contain a value of 0." ::= { gmplsTunnelARHopEntry 6 } gmplsTunnelARHopIpv6PrefixLen OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "If gmplsTunnelARHopAddrType is set to ipV6(2), this value will contain the prefix length for this hop's IPv6 address. This object is otherwise insignificant and should contain a value of 0." ::= { gmplsTunnelARHopEntry 7 } gmplsTunnelARHopAsNumber OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "If gmplsTunnelARHopAddrType is set to asNumber(3), then this value will contain the AS number of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact. Note that not all signaling protocols are capable of recording this information." ::= { gmplsTunnelARHopEntry 8 } gmplsTunnelARHopLspId OBJECT-TYPE SYNTAX MplsLSPID MAX-ACCESS read-create STATUS current DESCRIPTION "If gmplsTunnelARHopAddrType is set to lspid(4) or lspidIpV6(5), then this value will contain the LSPID of a tunnel used for this hop. The tunnel being reported has been tunneled through this hop (using label stacking). This object is otherwise insignificant and should contain a value of 0 to indicate this fact. Note that not all signaling protocols are capable of recording this information." ::= { gmplsTunnelARHopEntry 9 } gmplsTunnelARHopLabelStatuses OBJECT-TYPE SYNTAX BITS { forwardPresent (0), reversePresent (1), forwardGlobal (2), reverseGlobal (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This bitmask indicates the presence and status of labels indicated by the gmplsTunnelARHopExplicitLabel and gmplsTunnelARHopExplicitReverseLabel objects. For the Present bits, a set bit indicates that a label is present for this hop in the route. For the Global bits, a set bit indicates that the label comes from the Global Label Space. A clear bit indicates that this is a Per-Interface label. A Global bit only has meaning if the corresponding Present bit is set." ::= { gmplsTunnelARHopEntry 10 } gmplsTunnelARHopExplicitLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the row entry in the gmplsLabelTabel that defines the label used in the path as forward path at this point. This value only has meaning if the forwardPresent bit of gmplsTunnelARHopLabelStatuses is set. Note that in implementations where the label may be encoded within a 32 bit integer and where gmplsLabelTable is not implemented, this object may directly contain the label value to use." ::= { gmplsTunnelARHopEntry 11 } gmplsTunnelARHopExplicitReverseLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the row entry in the gmplsLabelTabel that defines the label used in the path as reverse path at this point. This value only has meaning if the reversePresent bit of gmplsTunnelARHopLabelStatuses is set. Note that in implementations where the label may be encoded within a 32 bit integer and where gmplsLabelTable is not implemented, this object may directly contain the label value to use." ::= { gmplsTunnelARHopEntry 12 } gmplsTunnelARHopUnnumberedInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the interface index of the unnumbered interface used when setting up the LSP. Only has value when gmplsTunnelARHopAddrType is set to unnumberedIfIpV4(6) or unnumberedIfIpV6(7) in which case the corresponding gmplsTunnelARHopIpv4Addr or gmplsTunnelARHopIpv6Addr variable must contain an LSR id." ::= { gmplsTunnelARHopEntry 13 } gmplsTunnelARHopProtection OBJECT-TYPE SYNTAX BITS { localAvailable (0), localInUse (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Availability and usage of protection on the reported link. localAvailable indicates that the link downstream of this node is protected via a local repair mechanism. This flag can only be set if the localProtectionDesired bit was set in gmplsTunnelAttributes for this tunnel. localInUse indicates that a local repair mechanism is in use to maintain this tunnel (usually in the face of an outage of the link it was previously routed over)." ::= { gmplsTunnelARHopEntry 14 } -- End of mplsTunnelARHopTable -- Tunnel Computed Hop table. gmplsTunnelCHopTable OBJECT-TYPE SYNTAX SEQUENCE OF GmplsTunnelCHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The gmplsTunnelCHopTable is used to indicate the hops, strict or loose, for a GMPLS or MPLS tunnel defined in gmplsTunnelTable, as computed by a constraint-based routing protocol, based on the gmplsTunnelHopTable for the outgoing direction of the tunnel. Each row in this table is indexed by gmplsTunnelCHopListIndex. Each row also has a secondary index gmplsTunnelCHopIndex, corresponding to the next hop that this row corresponds to. The first row in the table is the first hop after the origination point of the tunnel. In case we want to specify a particular interface on the originating LSR of an outgoing tunnel by which we want packets to exit the LSR, we specify this as the first hop for this tunnel in gmplsTunnelCHopTable. Please note that since the information necessary to build entries within this table may not be supported by some LSRs, implementation of this table is optional. Furthermore, since the information in this table is actually provided by routing protocol after the path has been computed, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as read-only." ::= { gmplsTeObjects 11 } gmplsTunnelCHopEntry OBJECT-TYPE SYNTAX GmplsTunnelCHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents a tunnel hop. An entry in this table is created by a constraint-based routing protocol based on the hops specified in the corresponding gmplsTunnelHopTable." INDEX { gmplsTunnelCHopListIndex, gmplsTunnelCHopIndex } ::= { gmplsTunnelCHopTable 1 } GmplsTunnelCHopEntry ::= SEQUENCE { gmplsTunnelCHopListIndex MplsPathIndex, gmplsTunnelCHopIndex MplsPathIndex, gmplsTunnelCHopAddrType GmplsHopAddrType, gmplsTunnelCHopIpv4Addr InetAddressIPv4, gmplsTunnelCHopIpv4PrefixLen Unsigned32, gmplsTunnelCHopIpv6Addr InetAddressIPv6, gmplsTunnelCHopIpv6PrefixLen Unsigned32, gmplsTunnelCHopAsNumber Unsigned32, gmplsTunnelCHopLspId MplsLSPID, gmplsTunnelCHopType INTEGER, gmplsTunnelCHopLabelStatuses BITS, gmplsTunnelCHopExplicitLabel Unsigned32, gmplsTunnelCHopExplicitReverseLabel Unsigned32, gmplsTunnelCHopUnnumberedInterface InterfaceIndexOrZero } gmplsTunnelCHopListIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Primary index into this table identifying a particular computed hop list." ::= { gmplsTunnelCHopEntry 1 } gmplsTunnelCHopIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Secondary index into this table identifying the particular hop." ::= { gmplsTunnelCHopEntry 2 } gmplsTunnelCHopAddrType OBJECT-TYPE SYNTAX GmplsHopAddrType MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes the address type of this tunnel hop." DEFVAL { ipV4 } ::= { gmplsTunnelCHopEntry 3 } gmplsTunnelCHopIpv4Addr OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-only STATUS current DESCRIPTION "If gmplsTunnelCHopAddrType is set to ipV4(1), then this value contains the IPv4 address of this hop. If gmplsTunnelCHopAddrType is set to lspid(4), then this value contains the Ingress LSR ID of the Tunnel. If gmplsTunnelCHopAddrType is set to unnumberedIpV4(6) then this value contains LSR ID of the router on which the unnumbered interface resides. This object is otherwise insignificant and contains a value of 0." ::= { gmplsTunnelCHopEntry 4 } gmplsTunnelCHopIpv4PrefixLen OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "If gmplsTunnelCHopAddrType is ipV4(1), then the prefix length for this hop's IPv4 address is contained herein. This object is otherwise insignificant and contains a value of 0." ::= { gmplsTunnelCHopEntry 5 } gmplsTunnelCHopIpv6Addr OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-only STATUS current DESCRIPTION "If gmplsTunnelCHopAddrType is set to ipV6(2), then this value contains the IPv6 address of this hop. If gmplsTunnelCHopAddrType is set to lspidIpV6(5), then this value contains the Ingress LSR ID of the Tunnel. If gmplsTunnelCHopAddrType is set to unnumberedIpV6(7) then this value contains LSR ID of the router on which the unnumbered interface resides. This object is otherwise insignificant and contains a value of 0." ::= { gmplsTunnelCHopEntry 6 } gmplsTunnelCHopIpv6PrefixLen OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "If gmplsTunnelHopAddrType is set to ipV6(2), this value contains the prefix length for this hop's IPv6 address. This object is otherwise insignificant and contains a value of 0." ::= { gmplsTunnelCHopEntry 7 } gmplsTunnelCHopAsNumber OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "If gmplsTunnelCHopAddrType is set to asNumber(3), then this value contains the AS number of this hop. This object is otherwise insignificant and contains a value of 0 to indicate this fact." ::= { gmplsTunnelCHopEntry 8 } gmplsTunnelCHopType OBJECT-TYPE SYNTAX INTEGER { strict(1), loose(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes whether this tunnel hop is routed in a strict or loose fashion." ::= { gmplsTunnelCHopEntry 9 } gmplsTunnelCHopLspId OBJECT-TYPE SYNTAX MplsLSPID MAX-ACCESS read-only STATUS current DESCRIPTION "If gmplsTunnelCHopAddrType is set to lspid(4) or lspidIpV6(5), then this value will contain the LSPID of a tunnel to use for this hop. The tunnel being configured is tunneled through this hop (using label stacking). This object is otherwise insignificant and should contain a value of 0 to indicate this fact. Note that not all signaling protocols include the facility to signal this type of explicit hop." ::= { gmplsTunnelCHopEntry 10 } gmplsTunnelCHopLabelStatuses OBJECT-TYPE SYNTAX BITS { forwardPresent (0), reversePresent (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This bitmask indicates the presence and status of labels indicated by the gmplsTunnelCHopExplicitLabel and gmplsTunnelCHopExplicitReverseLabel objects. For the Present bits, a set bit indicates that a label is present for this hop in the route." ::= { gmplsTunnelCHopEntry 11 } gmplsTunnelCHopExplicitLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the row entry in the gmplsLabelTabel that defines the explicit label to use in the explicit route as the forward path label at this point. This value only has meaning if the forwardPresent bit of gmplsTunnelCHopLabelStatuses is set. This variable is only valid for settings of gmplsTunnelCHopAddrType which may be associated with a forward path label. Note that in implementations where the label may be encoded within a 32 bit integer and where gmplsLabelTable is not implemented, this object may directly contain the label value to use." ::= { gmplsTunnelCHopEntry 12 } gmplsTunnelCHopExplicitReverseLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the row entry in the gmplsLabelTabel that defines the explicit label to use in the explicit route as the reverse path label at this point. This value only has meaning if the reversePresent bit of gmplsTunnelCHopLabelStatuses is set. This variable is only valid for settings of gmplsTunnelCHopAddrType which may be associated with a forward path label. Note that in implementations where the label may be encoded within a 32 bit integer and where gmplsLabelTable is not implemented, this object may directly contain the label value to use." ::= { gmplsTunnelCHopEntry 13 } gmplsTunnelCHopUnnumberedInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the interface index of the unnumbered interface to use when setting up the LSP. Only has value when gmplsTunnelCHopAddrType is set to unnumberedIfIpV4(6) or unnumberedIfIpV6(7) in which case the corresponding gmplsTunnelCHopIpv4Addr or gmplsTunnelCHopIpv6Addr variable contains an LSR id." ::= { gmplsTunnelCHopEntry 14 } -- End of gmplsTunnelCHopTable -- GMPLS Tunnel Performance Table. gmplsTunnelPacketPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF GmplsTunnelPacketPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides per-tunnel packet performance information." ::= { gmplsTeObjects 12 } gmplsTunnelPacketPerfEntry OBJECT-TYPE SYNTAX GmplsTunnelPacketPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created by the LSR for every tunnel where packets are visible to the LSR. Its is an extension to gmplsTunnelEntry." AUGMENTS { gmplsTunnelEntry } ::= { gmplsTunnelPacketPerfTable 1 } GmplsTunnelPacketPerfEntry ::= SEQUENCE { gmplsTunnelPacketPerfPackets Counter32, gmplsTunnelPacketPerfHCPackets Counter64, gmplsTunnelPacketPerfErrors Counter32, gmplsTunnelPacketPerfBytes Counter32, gmplsTunnelPacketPerfHCBytes Counter64, gmplsTunnelPacketPerfRvsPackets Counter32, gmplsTunnelPacketPerfRvsHCPackets Counter64, gmplsTunnelPacketPerfRvsErrors Counter32, gmplsTunnelPacketPerfRvsBytes Counter32, gmplsTunnelPacketPerfRvsHCBytes Counter64 } gmplsTunnelPacketPerfPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets forwarded on the tunnel." ::= { gmplsTunnelPacketPerfEntry 1 } gmplsTunnelPacketPerfHCPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "High capacity counter for number of packets forwarded on the tunnel." ::= { gmplsTunnelPacketPerfEntry 2 } gmplsTunnelPacketPerfErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errored packets received on the tunnel." ::= { gmplsTunnelPacketPerfEntry 3 } gmplsTunnelPacketPerfBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes forwarded on the tunnel." ::= { gmplsTunnelPacketPerfEntry 4 } gmplsTunnelPacketPerfHCBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "High capacity counter for number of bytes forwarded on the tunnel." ::= { gmplsTunnelPacketPerfEntry 5 } gmplsTunnelPacketPerfRvsPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets forwarded on the tunnel in the reverse direction if it is bidirectional." ::= { gmplsTunnelPacketPerfEntry 6 } gmplsTunnelPacketPerfRvsHCPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "High capacity counter for number of packets forwarded on the tunnel in the reverse direction if it is bidirectional." ::= { gmplsTunnelPacketPerfEntry 7 } gmplsTunnelPacketPerfRvsErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errored packets received on the tunnel in the reverse direction if it is bidirectional." ::= { gmplsTunnelPacketPerfEntry 8 } gmplsTunnelPacketPerfRvsBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes forwarded on the tunnel in the reverse direction if it is bidirectional." ::= { gmplsTunnelPacketPerfEntry 9 } gmplsTunnelPacketPerfRvsHCBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "High capacity counter for number of bytes forwarded on the tunnel in the reverse direction if it is bidirectional." ::= { gmplsTunnelPacketPerfEntry 10 } -- End of gmplsTunnelPacketPerfTable -- GMPLS Tunnel Error Table. gmplsTunnelErrorTable OBJECT-TYPE SYNTAX SEQUENCE OF GmplsTunnelErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides per-tunnel information about errors. Errors may be detected locally or reported through the signaling protocol." ::= { gmplsTeObjects 13 } gmplsTunnelErrorEntry OBJECT-TYPE SYNTAX GmplsTunnelErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created by the LSR for every tunnel where error information is visible to the LSR. Its is an extension to gmplsTunnelEntry." AUGMENTS { gmplsTunnelEntry } ::= { gmplsTunnelErrorTable 1 } GmplsTunnelErrorEntry ::= SEQUENCE { gmplsTunnelErrorLastError INTEGER, gmplsTunnelErrorLastTime TimeStamp, gmplsTunnelErrorReporterType INTEGER, gmplsTunnelErrorReporterIpv4Addr InetAddressIPv4, gmplsTunnelErrorReporterIpv6Addr InetAddressIPv6, gmplsTunnelErrorProtocolCode Unsigned32, gmplsTunnelErrorProtocolSubcode Unsigned32, gmplsTunnelErrorHelpString DisplayString } gmplsTunnelErrorLastError OBJECT-TYPE SYNTAX INTEGER { noError (0), unknown (1), localProtocol (2), remoteProtocol (3), configuration (4), pathComputation (5), localResources (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The nature of the last error. Protocol errors encompass all errors that may be reported through the protocol and give a wider set of error codes than those provided here. It may be useful for an implementation to report locally detected errors using the codes provided by the signaling protocols to give a better diagnosis of the error. Values in excess of 32767 are reserved for implementation-specific error codes." ::= { gmplsTunnelErrorEntry 1 } gmplsTunnelErrorLastTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which the last error occurred. This is presented as the value of SysUpTime when the error occurred or was reported to this node. If gmplsTunnelErrorLastError has the value noError (0), then this object is ignored." ::= { gmplsTunnelErrorEntry 2 } gmplsTunnelErrorReporterType OBJECT-TYPE SYNTAX INTEGER { noError (0), unknown (1), localNode (2), localIpV4 (3), remoteIpV4 (4), localIpV6 (5), remoteIpV6 (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reporter of the last error recorded. This object is used principally to aid in interpretation of gmplsTunnelErrorReporterIpv4Addr and gmplsTunnelErrorReporterIpv6Addr. Where the error has been locally generated and there is no requirement to associate the error with any specific local address (such as an interface), the value localNode (2) may be used. When gmplsTunnelErrorLastError has the value noError (0), then this object should have the value noError (0) and should be ignored." ::= { gmplsTunnelErrorEntry 3 } gmplsTunnelErrorReporterIpv4Addr OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the node reporting the last error, or the address of the resource (such as an interface) associated with the error. This object only has meaning if the object gmplsTunnelErrorReporterType has value localIpV4 (3) or remoteIpV4 (4). Otherwise the object should contain the value zero." ::= { gmplsTunnelErrorEntry 4 } gmplsTunnelErrorReporterIpv6Addr OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the node reporting the last error, or the address of the resource (such as an interface) associated with the error. This object only has meaning if the object gmplsTunnelErrorReporterType has value localIpV4 (3) or remoteIpV4 (4). Otherwise the object should contain the value zero." ::= { gmplsTunnelErrorEntry 5 } gmplsTunnelErrorProtocolCode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The primary error code associated with the last error and the protocol used to signal this tunnel. The relevant protocol is indicated by the gmplsTunnelSignallingProto object." ::= { gmplsTunnelErrorEntry 6 } gmplsTunnelErrorProtocolSubcode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The secondary error code associated with the last error and the protocol used to signal this tunnel. The relevant protocol is indicated by the gmplsTunnelSignallingProto object." ::= { gmplsTunnelErrorEntry 7 } gmplsTunnelErrorHelpString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing information about the last error, recovery actions and support advice. If there is no help string this object contains a zero length string." ::= { gmplsTunnelErrorEntry 8 } -- CR-LDP Tunnel Resource Table gmplsTunnelCRLDPResTable OBJECT-TYPE SYNTAX SEQUENCE OF GmplsTunnelCRLDPResEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The gmplsTunnelCRLDPResTable allows a manager to specify which CR-LDP-specific resources are desired for a GMPLS or MPLS tunnel if that tunnel is signaled using CR- LDP. Note that these attributes are in addition to those specified in gmplsTunnelResourceTable. This table also allows several tunnels to point to a single entry in this table, implying that these tunnels should share resources." ::= { gmplsTeObjects 14 } gmplsTunnelCRLDPResEntry OBJECT-TYPE SYNTAX GmplsTunnelCRLDPResEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents a set of resources for tunnel established using CRLDP (gmplsTunnelSignallingProto equal to crldp (3)). An entry can be created by a network administrator or by an SNMP agent as instructed by any MPLS signaling protocol." INDEX { gmplsTunnelResourceIndex } ::= { gmplsTunnelCRLDPResTable 1 } GmplsTunnelCRLDPResEntry ::= SEQUENCE { gmplsTunnelCRLDPResFlags BITS, gmplsTunnelCRLDPResRowStatus RowStatus, gmplsTunnelCRLDPResStorageType StorageType } gmplsTunnelCRLDPResFlags OBJECT-TYPE SYNTAX BITS { pdrNegotiable (0), pbsNegotiable (1), cdrNegotiable (2), cbsNegotiable (3), ebsNegotiable (4), weightNegotiable (5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the Flags conveyed as part of the traffic parameters during the establishment of the CRLSP. Each flag is a Negotiable Flag corresponding to a Traffic Parameter. The Negotiable Flag value zero denotes Not Negotiable and value one denotes Negotiable." REFERENCE "Section 4.3, Constraint-Based LSP Setup using LDP, Jamoussi, et. al, , November 2001." DEFVAL { 0 } ::= { gmplsTunnelCRLDPResEntry 1 } gmplsTunnelCRLDPResRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table." ::= { gmplsTunnelCRLDPResEntry 2 } gmplsTunnelCRLDPResStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the storage type for this table entry. When set to 'permanent', the entire row is to be stored." ::= { gmplsTunnelCRLDPResEntry 3 } -- End of gmplsTunnelCRLDPResTable -- Notifications. gmplsTunnelTrapEnable OBJECT-TYPE SYNTAX GmplsTrapEnable MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the generation of gmplsTunnelUp and gmplsTunnelDown notifications. If set to diabled (0), these notifications are not emitted. If set to oneAtATime (1), each notification may only carry information about a single Tunnel that has changed state. If set to rangeAllowed (2), each notification MAY carry information about a contiguous range of Tunnels that have changed state, but note that implementations may send multiple individual notifications even when rangeAllowed is selected." DEFVAL { disabled } ::= { gmplsTeObjects 15 } gmplsTunnelUp NOTIFICATION-TYPE OBJECTS { gmplsTunnelAdminStatus, gmplsTunnelOperStatus } STATUS current DESCRIPTION "This notification is generated when a gmplsTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of gmplsTunnelOperStatus." ::= { gmplsTeNotifyPrefix 1 } gmplsTunnelDown NOTIFICATION-TYPE OBJECTS { gmplsTunnelAdminStatus, gmplsTunnelOperStatus } STATUS current DESCRIPTION "This notification is generated when a gmplsTunnelOperStatus object for one of the configured tunnels is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of gmplsTunnelOperStatus." ::= { gmplsTeNotifyPrefix 2 } gmplsTunnelRerouted NOTIFICATION-TYPE OBJECTS { gmplsTunnelAdminStatus, gmplsTunnelOperStatus } STATUS current DESCRIPTION "This notification is generated when a tunnel is rerouted. If the actual path is used, then this tunnel's entry MAY contain the new path for this tunnel some time after this trap is issued by the agent." ::= { gmplsTeNotifyPrefix 3 } gmplsTunnelReoptimized NOTIFICATION-TYPE OBJECTS { gmplsTunnelAdminStatus, gmplsTunnelOperStatus } STATUS current DESCRIPTION "This notification is generated when a tunnel is reoptimized. If the actual path is used, then this tunnel's entry MAY contain the new path for this tunnel some time after this trap is issued by the agent." ::= { gmplsTeNotifyPrefix 4 } -- End of notifications. -- Module compliance. gmplsTeGroups OBJECT IDENTIFIER ::= { gmplsTeConformance 1 } gmplsTeCompliances OBJECT IDENTIFIER ::= { gmplsTeConformance 2 } gmplsTeModuleCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for agents that support the GMPLS TE MIB." MODULE -- this module -- The mandatory group has to be implemented by all -- LSRs that originate/terminate ESLSPs/tunnels. -- In addition, depending on the type of tunnels -- supported, other groups become mandatory as -- explained below. MANDATORY-GROUPS { gmplsTunnelGroup, gmplsTunnelScalarGroup } GROUP gmplsTunnelManualGroup DESCRIPTION "This group is mandatory for devices which support manual configuration of tunnels, in addition to gmplsTunnelGroup. The following constraints apply: gmplsTunnelSignallingProto should be at least read-only with a value of none(1)." GROUP gmplsTunnelSignaledGroup DESCRIPTION "This group is mandatory for devices which support signaled tunnel set up, in addition to gmplsTunnelGroup. The following constraints apply: gmplsTunnelSignallingProto should be at least read-only returning a value of ldp(2), or rsvp(3)." GROUP gmplsTunnelIsNotIntfcGroup DESCRIPTION "This group is mandatory for devices which support tunnels that are not interfaces, in addition to gmplsTunnelGroup. The following constraints apply: gmplsTunnelIsIf must at least be read-only returning no(0)." GROUP gmplsTunnelIsIntfcGroup DESCRIPTION "This group is mandatory for devices which support tunnels that are interfaces, in addition to gmplsTunnelGroup. The following constraints apply: gmplsTunnelIsIf must at least be read-only returning numbered(1)." GROUP gmplsTunnelOptionalGroup DESCRIPTION "Objects in this group are optional." GROUP gmplsTunnelCRLDPResOptionalGroup DESCRIPTION "Objects in this group are optional." GROUP gmplsTeNotificationControlGroup DESCRIPTION "This group is mandatory for devices which support some or all of the defined notifications within this MIB." GROUP gmplsTeNotificationGroup DESCRIPTION "This group is optional. If this group is supported then gmplsTeNotificationControlGroup is mandatory." -- GMPLS Tunnel scalars. OBJECT gmplsTunnelsConfigured MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelActive MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelTEDistProto MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelMaxHops MIN-ACCESS read-only DESCRIPTION "Write access is not required." -- gmplsTunnelTable OBJECT gmplsTunnelName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelDescr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelIsIf MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelIfIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelXCPointer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelSignallingProto MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelSetupPrio MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelHoldingPrio MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelAttributes MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelOwner MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelLocalProtectInUse MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelResourcePointer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelInstancePriority MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelHopTableIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelARHopTableIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelCHopTableIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelPrimaryInstance MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelPrimaryTimeUp MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelPathChanges MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelLastPathChange MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelCreationTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelStateTransitions MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelIncludeAnyAffinity MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelIncludeAllAffinity MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelExcludeAnyAffinity MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelPathInUse MIN-ACCESS read-only DESCRIPTION "Read-only support is required." OBJECT gmplsTunnelRole SYNTAX INTEGER { head(1) } MIN-ACCESS read-only DESCRIPTION "Only support for head is required." OBJECT gmplsTunnelTotalUpTime MIN-ACCESS read-only DESCRIPTION "Read-only support is required." OBJECT gmplsTunnelInstanceUpTime MIN-ACCESS read-only DESCRIPTION "Read-only support is required." OBJECT gmplsTunnelAdminStatus SYNTAX INTEGER { up (1), down (2) } MIN-ACCESS read-only DESCRIPTION "Only up and down states must be supported. Write access is not required." OBJECT gmplsTunnelOperStatus SYNTAX INTEGER { up (1), down (2) } MIN-ACCESS read-only DESCRIPTION "Only up and down states must be supported. Write access is not required." OBJECT gmplsTunnelRowStatus SYNTAX INTEGER { active(1), notInService(2), createAndGo(4), destroy(6) } MIN-ACCESS read-only DESCRIPTION "The notReady(3) and createAndWait(5) states need not be supported. Write access is not required." OBJECT gmplsTunnelStorageType SYNTAX INTEGER { other(1) } MIN-ACCESS read-only DESCRIPTION "Only other (1) needs to be supported." OBJECT gmplsTunnelLSPEncoding SYNTAX INTEGER { tunnelLspNotGmpls (0), tunnelLspPacket (1), tunnelLspEthernetV2Dix (2), tunnelLspAnsiPdh (3), tunnelLspEtsiPdh (4), tunnelLspSdhItutG7071996 (5), tunnelLspSonetAnsiT11051995 (6), tunnelLspDigitalWrapper (7), tunnelLspLambda (8), tunnelLspFiber (9), tunnelLspEthernet8023 (10), tunnelLspSdhItutG7072000 (11), tunnelLspSonetAnsiT11052000 (12) } MIN-ACCESS read-only DESCRIPTION "Only tunnelLspNotGmpls (0) is required." OBJECT gmplsTunnelLinkProtection MIN-ACCESS read-only DESCRIPTION "Read-only support is required." OBJECT gmplsTunnelGPid MIN-ACCESS read-only DESCRIPTION "Read-only support is required." OBJECT gmplsTunnelSecondary SYNTAX TruthValue MIN-ACCESS read-only DESCRIPTION "Only false is required." OBJECT gmplsTunnelDirection SYNTAX TruthValue MIN-ACCESS read-only DESCRIPTION "Only false is required." OBJECT gmplsTunnelPathComp SYNTAX INTEGER { dynamicFull(1),-- CSPF fully computed explicit(2),-- fully dynamicPartial(3) -- CSPF partially computed } MIN-ACCESS read-only DESCRIPTION "Only explicit (2) is required." -- gmplsTunnelHopTable OBJECT gmplsTunnelHopAddrType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelHopIpv4Addr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelHopIpv4PrefixLen MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelHopIpv6Addr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelHopIpv6PrefixLen MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelHopAsNumber MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelHopLspId MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelHopType SYNTAX INTEGER { strict(1) } MIN-ACCESS read-only DESCRIPTION "loose(2) need not be supported. Write access is not required." OBJECT gmplsTunnelHopIncludeExclude MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelHopPathOptionName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelHopRowStatus SYNTAX INTEGER { active(1), notInService(2), createAndGo(4), destroy(6) } MIN-ACCESS read-only DESCRIPTION "The notReady(3) and createAndWait(5) states need not be supported. Write access is not required." OBJECT gmplsTunnelHopStorageType SYNTAX INTEGER { other(1) } MIN-ACCESS read-only DESCRIPTION "Only other (1) needs to be supported." OBJECT gmplsTunnelHopLabelStatuses MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelHopExplicitLabel MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelHopExplicitReverseLabel MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelHopUnnumberedInterface MIN-ACCESS read-only DESCRIPTION "Write access is not required." -- gmplsTunnelResourceTable OBJECT gmplsTunnelResourceMaxRate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelResourceMeanRate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelResourceMaxBurstSize MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelResourceMeanBurstSize MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelResourceExcessBurstSize MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelResourceFrequency MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelResourceWeight MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelResourceRowStatus SYNTAX INTEGER { active(1), notInService(2), createAndGo(4), destroy(6) } MIN-ACCESS read-only DESCRIPTION "The notReady(3) and createAndWait(5) states need not be supported. Write access is not required." OBJECT gmplsTunnelResourceStorageType SYNTAX INTEGER { other(1) } MIN-ACCESS read-only DESCRIPTION "Only other (1) needs to be supported." -- gmplsCRLDPResourceTable OBJECT gmplsTunnelCRLDPResFlags SYNTAX Unsigned32 (0..63) MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelCRLDPResRowStatus SYNTAX INTEGER { active(1), notInService(2), createAndGo(4), destroy(6) } MIN-ACCESS read-only DESCRIPTION "The notReady(3) and createAndWait(5) states need not be supported. Write access is not required." OBJECT gmplsTunnelCRLDPResStorageType SYNTAX INTEGER { other(1) } MIN-ACCESS read-only DESCRIPTION "Only other (1) needs to be supported." -- gmplsTunnelARHopTable OBJECT gmplsTunnelARHopAddrType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelARHopIpv4Addr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelARHopIpv4PrefixLen MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelARHopIpv6Addr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelARHopIpv6PrefixLen MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelARHopAsNumber MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelARHopLspId MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelARHopLabelStatuses MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelARHopExplicitLabel MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelARHopExplicitReverseLabel MIN-ACCESS read-only DESCRIPTION "Write access is not required." -- glmpsTunnelCHopTable OBJECT gmplsTunnelCHopAddrType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelCHopIpv4Addr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelCHopIpv4PrefixLen MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelCHopIpv6Addr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelCHopIpv6PrefixLen MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelCHopAsNumber MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelCHopLspId MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelCHopType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelCHopLabelStatuses MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelCHopExplicitLabel MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelCHopExplicitReverseLabel MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelCHopUnnumberedInterface MIN-ACCESS read-only DESCRIPTION "Write access is not required." -- gmplsTunnelPerfTable OBJECT gmplsTunnelPacketPerfPackets MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelPacketPerfHCPackets MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelPacketPerfErrors MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelPacketPerfBytes MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelPacketPerfHCBytes MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelPacketPerfRvsPackets MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelPacketPerfRvsHCPackets MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelPacketPerfRvsErrors MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelPacketPerfRvsBytes MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelPacketPerfRvsHCBytes MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelErrorLastError MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelErrorLastTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelErrorReporterType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelErrorReporterIpv4Addr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelErrorReporterIpv6Addr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelErrorProtocolCode MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelErrorProtocolSubcode MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT gmplsTunnelErrorHelpString MIN-ACCESS read-only DESCRIPTION "Write access is not required." -- gmpls Notification control OBJECT gmplsTunnelTrapEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { gmplsTeCompliances 1 } -- Units of conformance. gmplsTunnelGroup OBJECT-GROUP OBJECTS { gmplsTunnelIndexNext, gmplsTunnelName, gmplsTunnelDescr, gmplsTunnelXCPointer, gmplsTunnelOwner, gmplsTunnelResourcePointer, gmplsTunnelInstancePriority, gmplsTunnelIfIndex, gmplsTunnelHopTableIndex, gmplsTunnelARHopTableIndex, gmplsTunnelCHopTableIndex, gmplsTunnelPrimaryInstance, gmplsTunnelPrimaryTimeUp, gmplsTunnelCreationTime, gmplsTunnelStateTransitions, gmplsTunnelPathInUse, gmplsTunnelRole, gmplsTunnelRowStatus, gmplsTunnelTotalUpTime, gmplsTunnelInstanceUpTime, gmplsTunnelAdminStatus, gmplsTunnelOperStatus, gmplsTunnelStorageType, gmplsTunnelDirection, gmplsTunnelPacketPerfPackets, gmplsTunnelPacketPerfHCPackets, gmplsTunnelPacketPerfErrors, gmplsTunnelPacketPerfBytes, gmplsTunnelPacketPerfHCBytes, gmplsTunnelPacketPerfRvsPackets, gmplsTunnelPacketPerfRvsHCPackets, gmplsTunnelPacketPerfRvsErrors, gmplsTunnelPacketPerfRvsBytes, gmplsTunnelPacketPerfRvsHCBytes, gmplsTunnelErrorLastError, gmplsTunnelErrorLastTime, gmplsTunnelErrorReporterType, gmplsTunnelErrorReporterIpv4Addr, gmplsTunnelErrorReporterIpv6Addr, gmplsTunnelErrorProtocolCode, gmplsTunnelErrorProtocolSubcode, gmplsTunnelErrorHelpString } STATUS current DESCRIPTION "Necessary, but not sufficient, set of objects to implement tunnels. In addition, depending on the type of the tunnels supported (for example, manually configured or signaled, persistent or non-persistent, etc.), the following other groups defined below are mandatory: gmplsTunnelManualGroup and/or gmplsTunnelSignaledGroup, gmplsTunnelIsNotIntfcGroup and/or gmplsTunnelIsIntfcGroup." ::= { gmplsTeGroups 1 } gmplsTunnelManualGroup OBJECT-GROUP OBJECTS { gmplsTunnelSignallingProto } STATUS current DESCRIPTION "Object(s) needed to implement manually configured tunnels." ::= { gmplsTeGroups 2 } gmplsTunnelSignaledGroup OBJECT-GROUP OBJECTS { gmplsTunnelSignallingProto, gmplsTunnelSetupPrio, gmplsTunnelHoldingPrio, gmplsTunnelAttributes, gmplsTunnelLocalProtectInUse, gmplsTunnelPathChanges, gmplsTunnelLastPathChange, gmplsTunnelIncludeAnyAffinity, gmplsTunnelIncludeAllAffinity, gmplsTunnelExcludeAnyAffinity, gmplsTunnelRole, gmplsTunnelLSPEncoding, gmplsTunnelSwitchingType, gmplsTunnelLinkProtection, gmplsTunnelGPid, gmplsTunnelSecondary, gmplsTunnelPathComp, gmplsTunnelHopPathOptionIndexNextIndex, gmplsTunnelHopIndexNextIndex, gmplsTunnelHopListIndexNext, gmplsTunnelHopAddrType, gmplsTunnelHopIpv4Addr, gmplsTunnelHopIpv4PrefixLen, gmplsTunnelHopIpv6Addr, gmplsTunnelHopIpv6PrefixLen, gmplsTunnelHopAsNumber, gmplsTunnelHopLspId, gmplsTunnelHopType, gmplsTunnelHopIncludeExclude, gmplsTunnelHopPathOptionName, gmplsTunnelHopRowStatus, gmplsTunnelHopStorageType, gmplsTunnelHopLabelStatuses, gmplsTunnelHopExplicitLabel, gmplsTunnelHopExplicitReverseLabel, gmplsTunnelHopUnnumberedInterface } STATUS current DESCRIPTION "Objects needed to implement signaled tunnels." ::= { gmplsTeGroups 3 } gmplsTunnelScalarGroup OBJECT-GROUP OBJECTS { gmplsTunnelsConfigured, gmplsTunnelActive, gmplsTunnelTEDistProto, gmplsTunnelMaxHops } STATUS current DESCRIPTION "Scalar objects needed to implement MPLS tunnels." ::= { gmplsTeGroups 4 } gmplsTunnelIsIntfcGroup OBJECT-GROUP OBJECTS { gmplsTunnelIsIf } STATUS current DESCRIPTION "Objects needed to implement tunnels that are interfaces." ::= { gmplsTeGroups 5 } gmplsTunnelIsNotIntfcGroup OBJECT-GROUP OBJECTS { gmplsTunnelIsIf } STATUS current DESCRIPTION "Objects needed to implement tunnels that are not interfaces." ::= { gmplsTeGroups 6 } gmplsTunnelOptionalGroup OBJECT-GROUP OBJECTS { gmplsTunnelResourceIndexNext, gmplsTunnelResourceMaxRate, gmplsTunnelResourceMeanRate, gmplsTunnelResourceMaxBurstSize, gmplsTunnelResourceMeanBurstSize, gmplsTunnelResourceExcessBurstSize, gmplsTunnelResourceFrequency, gmplsTunnelResourceWeight, gmplsTunnelResourceRowStatus, gmplsTunnelResourceStorageType, gmplsTunnelARHopAddrType, gmplsTunnelARHopIpv4Addr, gmplsTunnelARHopIpv4PrefixLen, gmplsTunnelARHopIpv6Addr, gmplsTunnelARHopIpv6PrefixLen, gmplsTunnelARHopAsNumber, gmplsTunnelARHopLspId, gmplsTunnelARHopLabelStatuses, gmplsTunnelARHopExplicitLabel, gmplsTunnelARHopExplicitReverseLabel, gmplsTunnelARHopUnnumberedInterface, gmplsTunnelARHopProtection, gmplsTunnelCHopAddrType, gmplsTunnelCHopIpv4Addr, gmplsTunnelCHopIpv4PrefixLen, gmplsTunnelCHopIpv6Addr, gmplsTunnelCHopIpv6PrefixLen, gmplsTunnelCHopAsNumber, gmplsTunnelCHopLspId, gmplsTunnelCHopType, gmplsTunnelCHopLabelStatuses, gmplsTunnelCHopExplicitLabel, gmplsTunnelCHopExplicitReverseLabel, gmplsTunnelCHopUnnumberedInterface } STATUS current DESCRIPTION "The objects in this group are optional." ::= { gmplsTeGroups 7 } gmplsTunnelCRLDPResOptionalGroup OBJECT-GROUP OBJECTS { gmplsTunnelCRLDPResFlags, gmplsTunnelCRLDPResRowStatus, gmplsTunnelCRLDPResStorageType } STATUS current DESCRIPTION "Set of objects implemented for resources applicable for tunnels signaled using CR- LDP." ::= { gmplsTeGroups 8 } gmplsTeNotificationControlGroup OBJECT-GROUP OBJECTS { gmplsTunnelTrapEnable } STATUS current DESCRIPTION "Set of objects implemented for control of notifications." ::= { gmplsTeGroups 9 } gmplsTeNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { gmplsTunnelUp, gmplsTunnelDown, gmplsTunnelRerouted, gmplsTunnelReoptimized } STATUS current DESCRIPTION "Set of notifications implemented in this module. None is mandatory, but if this group is included, the gmplsTeNotificationControlGroup is mandatory." ::= { gmplsTeGroups 10 } END -- -- Copyright (C) The Internet Society (2002). All Rights -- Reserved. -- -- This document and translations of it may be copied and -- furnished to others, and derivative works that comment on -- or otherwise explain it or assist in its implementation -- may be prepared, copied, published and distributed, in -- whole or in part, without restriction of any kind, -- provided that the above copyright notice and this -- paragraph are included on all such copies and derivative -- works. However, this document itself may not be modified -- in any way, such as by removing the copyright notice or -- references to the Internet Society or other Internet -- organizations, except as needed for the purpose of -- developing Internet standards in which case the -- procedures for copyrights defined in the Internet -- Standards process must be followed, or as required to -- translate it into languages other than English. -- -- The limited permissions granted above are perpetual and -- will not be revoked by the Internet Society or its -- successors or assigns. This document and the information -- contained herein is provided on an "AS IS" basis and THE -- INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE -- DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING -- BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE -- INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY -- IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A -- PARTICULAR PURPOSE.