-- extracted from rfc3806.txt -- at Tue Jun 15 06:20:45 2004 IANA-FINISHER-MIB DEFINITIONS ::= BEGIN -- http://www.iana.org/assignments/ianafinisher-mib IMPORTS MODULE-IDENTITY, mib-2 FROM SNMPv2-SMI -- [RFC2578] TEXTUAL-CONVENTION FROM SNMPv2-TC; -- [RFC2579] ianafinisherMIB MODULE-IDENTITY LAST-UPDATED "200406020000Z" -- June 2, 2004 ORGANIZATION "IANA" CONTACT-INFO "Internet Assigned Numbers Authority Postal: ICANN 4676 Admiralty Way, Suite 330 Marina del Rey, CA 90292 Tel: +1 310 823 9358 E-Mail: iana@iana.org" DESCRIPTION "This MIB module defines a set of finishing-related TEXTUAL-CONVENTIONs for use in Finisher MIB (RFC 3806) and other MIBs which need to specify finishing mechanism details. Any additions or changes to the contents of this MIB module require either publication of an RFC, or Designated Expert Review as defined in RFC 2434, Guidelines for Writing an IANA Considerations Section in RFCs. The Designated Expert will be selected by the IESG Area Director(s) of the Applications Area. Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3806. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html" REVISION "200406020000Z" -- June 2, 2004 DESCRIPTION "Original version, published in coordination with Finisher MIB (RFC 3806)." ::= { mib-2 110 } -- TEXTUAL-CONVENTIONs for this MIB module FinDeviceTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The defined finishing device subunit process enumerations." SYNTAX INTEGER { other(1), unknown(2), stitcher(3), folder(4), binder(5), trimmer(6), dieCutter(7), puncher(8), perforater(9), slitter(10), separationCutter(11), imprinter(12), wrapper(13), bander(14), makeEnvelope(15), stacker(16), sheetRotator(17), inserter(18) } FinAttributeTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TEXTUAL-CONVENTION defines the set of enums for use in the finDeviceAttributeTable. See section 5.7 for the complete specification of each attribute." SYNTAX INTEGER { other(1), deviceName(3), deviceVendorName(4), deviceModel(5), deviceVersion(6), deviceSerialNumber(7), maximumSheets(8), finProcessOffsetUnits(9), finReferenceEdge(10), finAxisOffset(11), finJogEdge(12), finHeadLocation(13), finOperationRestrictions(14), finNumberOfPositions(15), namedConfiguration(16), finMediaTypeRestriction(17), finPrinterInputTraySupported(18), finPreviousFinishingOperation(19), finNextFinishingOperation(20), stitchingType(30), stitchingDirection(31), foldingType(40), bindingType(50), punchHoleType(80), punchHoleSizeLongDim(81), punchHoleSizeShortDim(82), punchPattern(83), slittingType(100), wrappingType(130), stackOutputType(160), stackOffset(161), stackRotation(162) } FinEdgeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies an edge for a Finishing Process." SYNTAX INTEGER { topEdge(3), bottomEdge(4), leftEdge(5), rightEdge(6) } FinStitchingTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The defined stitching type enumerations. For the edgeStitch and stapleDual enums, the finReferenceEdge attribute is recommended to define the edge to which the operation applies." SYNTAX INTEGER { other(1), -- More information in other attributes unknown(2), stapleTopLeft(4), stapleBottomLeft(5), stapleTopRight(6), stapleBottomRight(7), saddleStitch(8), edgeStitch(9), stapleDual(10) } FinStitchingDirTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Defines the direction, relative to the top sheet in the output subunit, that the stitching operation was performed. For a topDown(3) process, the staple will be clinched on the bottom of the stack. This parameter can be used to determine what order the pages of a booklet are to be printed such that the staple clinch will be on the inside of the resulting booklet." SYNTAX INTEGER { unknown(2), topDown(3), bottomUp(4) } FinStitchingAngleTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This enumeration provides a description of the angular orientation of each stitch in a single or multiple stitching operation, relative to the 'X' axis. As with all finishing operations, the 'X' axis is always relative to the portrait orientation of the document regardless of the orientation of the printed image. This enum is primarily applicable to corner stitching operations." SYNTAX INTEGER { unknown(2), horizontal(3), vertical(4), slanted(5) } FinFoldingTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The defined folding device process enumerations." SYNTAX INTEGER { other(1), -- More information in other attributes unknown(2), zFold(3), halfFold(4), letterFold(5) } FinBindingTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The defined binding type enumerations." SYNTAX INTEGER { other(1), -- More information in other attributes unknown(2), tape(4), plastic(5), velo(6), perfect(7), spiral(8), adhesive(9), comb(10), padding(11) } FinPunchHoleTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The defined hole type punch process enumerations." SYNTAX INTEGER { other(1), -- More information in other attributes unknown(2), round(3), oblong(4), square(5), rectangular(6), star(7) } FinPunchPatternTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The defined hole pattern punch process enumerations." SYNTAX INTEGER { other(1), --Pattern to be defined in other attributes unknown(2), twoHoleUSTop(4), --Letter/legal, 8.5 inch edge threeHoleUS(5), --Letter/ledger, 11 inch edge twoHoleDIN(6), --A4/A3, 297 mm edge fourHoleDIN(7), --A4/A3, 297 mm edge twentyTwoHoleUS(8), --Letter/ledger, 11 inch edge nineteenHoleUS(9), --Letter/ledger, 11 inch edge twoHoleMetric(10), --B5/B4, 257 mm edge swedish4Hole(11), --A4/A3, 297 mm edge twoHoleUSSide(12), --Letter/ledger, 11 inch edge fiveHoleUS(13), --Letter/ledger, 11 inch edge sevenHoleUS(14), --Letter/ledger, 11 inch edge mixed7H4S(15), --A4/A3, 297 mm edge norweg6Hole(16), --A4/A3, 297 mm edge metric26Hole(17), --B5/B4, 257 mm edge metric30Hole(18) --A4/A3, 297 mm edge } FinSlittingTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The defined slitting type enumerations." SYNTAX INTEGER { other(1), -- More information in other attributes unknown(2), slitAndSeparate(4), slitAndMerge(5) } FinWrappingTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The defined wrapping device process enumerations." SYNTAX INTEGER { other(1), -- More information in other attributes unknown(2), shrinkWrap(4), paperWrap(5) } FinStackOutputTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The defined stack output type enumerations." SYNTAX INTEGER { other(1), -- More information in other attributes unknown(2), straight(4), -- No offset, one on top of another offset(5), crissCross(6) -- Rotated } END -- -- Copyright (C) The Internet Society (2004). This document is subject -- to the rights, licenses and restrictions contained in BCP 78, and -- except as set forth therein, the authors retain all their rights. -- -- This document and the information contained herein are provided on an -- "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS -- OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET -- ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, -- INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE -- INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED -- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -- -- Intellectual Property -- -- The IETF takes no position regarding the validity or scope of any -- Intellectual Property Rights or other rights that might be claimed to -- pertain to the implementation or use of the technology described in -- this document or the extent to which any license under such rights -- might or might not be available; nor does it represent that it has -- made any independent effort to identify any such rights. Information -- on the procedures with respect to rights in RFC documents can be -- found in BCP 78 and BCP 79. -- -- Copies of IPR disclosures made to the IETF Secretariat and any -- assurances of licenses to be made available, or the result of an -- attempt made to obtain a general license or permission for the use of -- such proprietary rights by implementers or users of this -- specification can be obtained from the IETF on-line IPR repository at -- http://www.ietf.org/ipr. -- -- The IETF invites any interested party to bring to its attention any -- copyrights, patents or patent applications, or other proprietary -- rights that may cover technology that may be required to implement -- this standard. Please address the information to the IETF at ietf- -- ipr@ietf.org. --