-- extracted from draft-ietf-ips-auth-mib-03.txt -- at Sat Dec 7 06:11:25 2002 IPS-AUTH-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Unsigned32, experimental FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, AutonomousType FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- RFC 2571 AddressFamilyNumbers FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB ; ipsAuthModule MODULE-IDENTITY LAST-UPDATED "200211010000Z" -- November 1, 2002 ORGANIZATION "IETF IPS Working Group" CONTACT-INFO " Mark Bakke Postal: Cisco Systems, Inc 6450 Wedgwood Road, Suite 130 Maple Grove, MN USA 55311 Tel: +1 763-398-1000 Fax: +1 763-398-1001 E-mail: mbakke@cisco.com Jim Muchow Postal: Cisco Systems, Inc 6450 Wedgwood Road, Suite 130 Maple Grove, MN USA 55311 Tel: +1 763-398-1000 Fax: +1 763-398-1001 E-mail: jmuchow@cisco.com" DESCRIPTION "The IP Storage Authentication MIB module." REVISION "200211010000Z" -- November 1, 2002 DESCRIPTION "Initial revision published as RFC xxxx." --::= { mib-2 xx } -- in case you want to COMPILE ::= { experimental 99999 } ipsAuthObjects OBJECT IDENTIFIER ::= { ipsAuthModule 1 } ipsAuthNotifications OBJECT IDENTIFIER ::= { ipsAuthModule 2 } ipsAuthConformance OBJECT IDENTIFIER ::= { ipsAuthModule 3 } -- Textual Conventions IpsAuthAddress ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IP Storage requires the use of address information that uses not only the InetAddress type defined in the INET-ADDRESS-MIB, but also Fibre Channel type defined in the Fibre Channel Management MIB. Although these address types are recognized in the IANA Address Family Numbers MIB, the addressing mechanisms have not been merged into a well-known, common type. This data type, the IpsAuthAddress, performs this function for this MIB." REFERENCE "IANA-ADDRESS-FAMILY-NUMBERS-MIB; INET-ADDRESS-MIB (RFC 2851); Fibre Channel Management MIB (presently defined in draft-ietf-ips-fcmgmt-mib-01.txt)." SYNTAX OCTET STRING (SIZE(0..255)) ------------------------------------------------------------------------ ipsAuthDescriptors OBJECT IDENTIFIER ::= { ipsAuthObjects 1 } ipsAuthMethodTypes OBJECT IDENTIFIER ::= { ipsAuthDescriptors 1 } ipsAuthMethodNone OBJECT-IDENTITY STATUS current DESCRIPTION "The authoritative identifier when no authentication method is used." REFERENCE "iSCSI Protocol Specification." ::= { ipsAuthMethodTypes 1 } ipsAuthMethodSrp OBJECT-IDENTITY STATUS current DESCRIPTION "The authoritative identifier when the authentication method is SRP." REFERENCE "iSCSI Protocol Specification." ::= { ipsAuthMethodTypes 2 } ipsAuthMethodChap OBJECT-IDENTITY STATUS current DESCRIPTION "The authoritative identifier when the authentication method is CHAP." REFERENCE "iSCSI Protocol Specification." ::= { ipsAuthMethodTypes 3 } ipsAuthMethodKerberos OBJECT-IDENTITY STATUS current DESCRIPTION "The authoritative identifier when the authentication method is Kerberos." REFERENCE "iSCSI Protocol Specification." ::= { ipsAuthMethodTypes 4 } ---------------------------------------------------------------------- ipsAuthInstance OBJECT IDENTIFIER ::= { ipsAuthObjects 2 } -- Instance Attributes Table ipsAuthInstanceAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IpsAuthInstanceAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Authentication instances present on the system." ::= { ipsAuthInstance 2 } ipsAuthInstanceAttributesEntry OBJECT-TYPE SYNTAX IpsAuthInstanceAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing management information applicable to a particular Authentication instance." INDEX { ipsAuthInstIndex } ::= { ipsAuthInstanceAttributesTable 1 } IpsAuthInstanceAttributesEntry ::= SEQUENCE { ipsAuthInstIndex Unsigned32, ipsAuthInstDescr SnmpAdminString } ipsAuthInstIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer used to uniquely identify a particular authentication instance." ::= { ipsAuthInstanceAttributesEntry 1 } ipsAuthInstDescr OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "An octet string, determined by the implementation to describe the authentication instance. When only a single instance is present, this object may be set to the zero-length string; with multiple authentication instances, it may be used in an implementation-dependent manner to describe the purpose of the respective instance." ::= { ipsAuthInstanceAttributesEntry 2 } ipsAuthIdentity OBJECT IDENTIFIER ::= { ipsAuthObjects 3 } -- User Identity Attributes Table ipsAuthIdentAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IpsAuthIdentAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of user identities, each belonging to a particular ipsAuthInstance." ::= { ipsAuthIdentity 1 } ipsAuthIdentAttributesEntry OBJECT-TYPE SYNTAX IpsAuthIdentAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing management information describing a user identity within an authentication instance on this node." INDEX { ipsAuthInstIndex, ipsAuthIdentIndex } ::= { ipsAuthIdentAttributesTable 1 } IpsAuthIdentAttributesEntry ::= SEQUENCE { ipsAuthIdentIndex Unsigned32, ipsAuthIdentDescription SnmpAdminString, ipsAuthIdentRowStatus RowStatus } ipsAuthIdentIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer used to uniquely identify a particular identity instance within an authentication instance present on the node." ::= { ipsAuthIdentAttributesEntry 1 } ipsAuthIdentDescription OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "An octet string describing this particular identity." ::= { ipsAuthIdentAttributesEntry 2 } ipsAuthIdentRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This field allows entries to be dynamically added and removed from this table via SNMP." ::= { ipsAuthIdentAttributesEntry 3 } ipsAuthIdentityName OBJECT IDENTIFIER ::= { ipsAuthObjects 4 } -- User Initiator Name Attributes Table ipsAuthIdentNameAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IpsAuthIdentNameAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of unique names that can be used to positively identify a particular user identity." ::= { ipsAuthIdentityName 1 } ipsAuthIdentNameAttributesEntry OBJECT-TYPE SYNTAX IpsAuthIdentNameAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing management information applicable to a unique identity name which can be used to identify a user identity within a particular authentication instance." INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthIdentNameIndex } ::= { ipsAuthIdentNameAttributesTable 1 } IpsAuthIdentNameAttributesEntry ::= SEQUENCE { ipsAuthIdentNameIndex Unsigned32, ipsAuthIdentName SnmpAdminString, ipsAuthIdentNameRowStatus RowStatus } ipsAuthIdentNameIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer used to uniquely identify a particular identity name instance within an ipsAuthIdentity within an authentication instance." ::= { ipsAuthIdentNameAttributesEntry 1 } ipsAuthIdentName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "A character string which is the unique name of an identity that may be used to identify this ipsAuthIdent entry." ::= { ipsAuthIdentNameAttributesEntry 2 } ipsAuthIdentNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This field allows entries to be dynamically added and removed from this table via SNMP." ::= { ipsAuthIdentNameAttributesEntry 3 } ipsAuthIdentityAddress OBJECT IDENTIFIER ::= { ipsAuthObjects 5 } -- User Initiator Address Attributes Table ipsAuthIdentAddrAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IpsAuthIdentAddrAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of address ranges that are allowed to serve as the endpoint addresses of a particular identity. An address range includes a starting and ending address and an optional netmask, and an address type indicator, which can specify whether the address is IPv4, IPv6, FC-WWPN, or FC-WWNN." ::= { ipsAuthIdentityAddress 1 } ipsAuthIdentAddrAttributesEntry OBJECT-TYPE SYNTAX IpsAuthIdentAddrAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing management information applicable to an address range which is used as part of the authentication of an identity within an authentication instance on this node." INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthIdentAddrIndex } ::= { ipsAuthIdentAddrAttributesTable 1 } IpsAuthIdentAddrAttributesEntry ::= SEQUENCE { ipsAuthIdentAddrIndex Unsigned32, ipsAuthIdentAddrType AddressFamilyNumbers, ipsAuthIdentAddrStart IpsAuthAddress, ipsAuthIdentAddrEnd IpsAuthAddress, ipsAuthIdentAddrRowStatus RowStatus } ipsAuthIdentAddrIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer used to uniquely identify a particular ipsAuthIdentAddress instance within an ipsAuthIdentity within an authentication instance present on the node." ::= { ipsAuthIdentAddrAttributesEntry 1 } ipsAuthIdentAddrType OBJECT-TYPE SYNTAX AddressFamilyNumbers MAX-ACCESS read-create STATUS current DESCRIPTION "The type of Address in the ipsAuthIdentAddress start, end, and mask fields. This type is taken from the IANA address family types; more types may be registered independently of this MIB." ::= { ipsAuthIdentAddrAttributesEntry 2 } ipsAuthIdentAddrStart OBJECT-TYPE SYNTAX IpsAuthAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The starting address of the allowed address range." ::= { ipsAuthIdentAddrAttributesEntry 3 } ipsAuthIdentAddrEnd OBJECT-TYPE SYNTAX IpsAuthAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The ending address of the allowed address range. If the ipsAuthIdentAddrEntry specifies a single address, this shall match the ipsAuthIdentAddrStart." ::= { ipsAuthIdentAddrAttributesEntry 4 } ipsAuthIdentAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This field allows entries to be dynamically added and removed from this table via SNMP." ::= { ipsAuthIdentAddrAttributesEntry 5 } ipsAuthCredential OBJECT IDENTIFIER ::= { ipsAuthObjects 6 } -- Credential Attributes Table ipsAuthCredentialAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IpsAuthCredentialAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of credentials related to user identities that are allowed as valid authenticators of the particular identity." ::= { ipsAuthCredential 1 } ipsAuthCredentialAttributesEntry OBJECT-TYPE SYNTAX IpsAuthCredentialAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing management information applicable to a credential which authenticates a user identity within an authentication instance." INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthCredIndex } ::= { ipsAuthCredentialAttributesTable 1 } IpsAuthCredentialAttributesEntry ::= SEQUENCE { ipsAuthCredIndex Unsigned32, ipsAuthCredAuthMethod AutonomousType, ipsAuthCredRowStatus RowStatus } ipsAuthCredIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer used to uniquely identify a particular Credential instance within an instance present on the node." ::= { ipsAuthCredentialAttributesEntry 1 } ipsAuthCredAuthMethod OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains an OBJECT IDENTIFIER which identifies the authentication method used with this credential. Some standardized values for this object are defined within the ipsAuthMethods subtree." ::= { ipsAuthCredentialAttributesEntry 2 } ipsAuthCredRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This field allows entries to be dynamically added and removed from this table via SNMP." ::= { ipsAuthCredentialAttributesEntry 3 } ipsAuthCredChap OBJECT IDENTIFIER ::= { ipsAuthObjects 7 } -- Credential Chap-Specific Attributes Table ipsAuthCredChapAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IpsAuthCredChapAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of CHAP attributes for credentials that use ipsAuthMethodChap as its ipsAuthCredAuthMethod." ::= { ipsAuthCredChap 1 } ipsAuthCredChapAttributesEntry OBJECT-TYPE SYNTAX IpsAuthCredChapAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing management information applicable to a credential which uses ipsAuthMethodChap as their ipsAuthCredAuthMethod." INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthCredIndex } ::= { ipsAuthCredChapAttributesTable 1 } IpsAuthCredChapAttributesEntry ::= SEQUENCE { ipsAuthCredChapUserName SnmpAdminString, ipsAuthCredChapPassword SnmpAdminString, ipsAuthCredChapRowStatus RowStatus } ipsAuthCredChapUserName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "An octet string containing the CHAP user name for this credential." ::= { ipsAuthCredChapAttributesEntry 1 } ipsAuthCredChapPassword OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "An octet string containing the password for this credential. If written, it changes the password for the credential. If read, it returns a zero-length string." ::= { ipsAuthCredChapAttributesEntry 2 } ipsAuthCredChapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This field allows entries to be dynamically added and removed from this table via SNMP." ::= { ipsAuthCredChapAttributesEntry 3 } ipsAuthCredSrp OBJECT IDENTIFIER ::= { ipsAuthObjects 8 } -- Credential Srp-Specific Attributes Table ipsAuthCredSrpAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IpsAuthCredSrpAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of SRP attributes for credentials that use ipsAuthMethodSrp as their ipsAuthCredAuthMethod." ::= { ipsAuthCredSrp 1 } ipsAuthCredSrpAttributesEntry OBJECT-TYPE SYNTAX IpsAuthCredSrpAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing management information applicable to a credential which uses ipsAuthMethodSrp as its ipsAuthCredAuthMethod." INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthCredIndex } ::= { ipsAuthCredSrpAttributesTable 1 } IpsAuthCredSrpAttributesEntry ::= SEQUENCE { ipsAuthCredSrpUserName SnmpAdminString, ipsAuthCredSrpPassword SnmpAdminString, ipsAuthCredSrpRowStatus RowStatus } ipsAuthCredSrpUserName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "An octet string containing the CHAP user name for this credential." ::= { ipsAuthCredSrpAttributesEntry 1 } ipsAuthCredSrpPassword OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "An octet string containing the password for this credential. If written, it changes the password for the credential. If read, it returns a zero-length string." ::= { ipsAuthCredSrpAttributesEntry 2 } ipsAuthCredSrpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This field allows entries to be dynamically added and removed from this table via SNMP." ::= { ipsAuthCredSrpAttributesEntry 3 } ipsAuthCredKerberos OBJECT IDENTIFIER ::= { ipsAuthObjects 9 } -- Credential Kerberos-Specific Attributes Table ipsAuthCredKerbAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IpsAuthCredKerbAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Kerberos attributes for credentials that use ipsAuthMethodKerberos as their ipsAuthCredAuthMethod." ::= { ipsAuthCredKerberos 1 } ipsAuthCredKerbAttributesEntry OBJECT-TYPE SYNTAX IpsAuthCredKerbAttributesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing management information applicable to a credential which uses ipsAuthMethodKerberos as its ipsAuthCredAuthMethod." INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthCredIndex } ::= { ipsAuthCredKerbAttributesTable 1 } IpsAuthCredKerbAttributesEntry ::= SEQUENCE { ipsAuthCredKerbPrincipal SnmpAdminString, ipsAuthCredKerbRowStatus RowStatus } ipsAuthCredKerbPrincipal OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "An octet string containing a Kerberos principal for this credential." ::= { ipsAuthCredKerbAttributesEntry 1 } ipsAuthCredKerbRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This field allows entries to be dynamically added and removed from this table via SNMP." ::= { ipsAuthCredKerbAttributesEntry 2 } ------------------------------------------------------------------------ -- Notifications -- There are no notifications necessary in this MIB. ------------------------------------------------------------------------ -- Conformance Statements ipsAuthGroups OBJECT IDENTIFIER ::= { ipsAuthConformance 1 } ipsAuthInstanceAttributesGroup OBJECT-GROUP OBJECTS { ipsAuthInstDescr } STATUS current DESCRIPTION "A collection of objects providing information about authentication instances." ::= { ipsAuthGroups 1 } ipsAuthIdentAttributesGroup OBJECT-GROUP OBJECTS { ipsAuthIdentDescription, ipsAuthIdentRowStatus } STATUS current DESCRIPTION "A collection of objects providing information about user identities within an authentication instance." ::= { ipsAuthGroups 2 } ipsAuthIdentNameAttributesGroup OBJECT-GROUP OBJECTS { ipsAuthIdentName, ipsAuthIdentNameRowStatus } STATUS current DESCRIPTION "A collection of objects providing information about user names within user identities within an authentication instance." ::= { ipsAuthGroups 3 } ipsAuthIdentAddrAttributesGroup OBJECT-GROUP OBJECTS { ipsAuthIdentAddrType, ipsAuthIdentAddrStart, ipsAuthIdentAddrEnd, ipsAuthIdentAddrRowStatus } STATUS current DESCRIPTION "A collection of objects providing information about address ranges within user identities within an authentication instance." ::= { ipsAuthGroups 4 } ipsAuthIdentCredAttributesGroup OBJECT-GROUP OBJECTS { ipsAuthCredAuthMethod, ipsAuthCredRowStatus } STATUS current DESCRIPTION "A collection of objects providing information about credentials within user identities within an authentication instance." ::= { ipsAuthGroups 5 } ipsAuthIdentChapAttrGroup OBJECT-GROUP OBJECTS { ipsAuthCredChapUserName, ipsAuthCredChapPassword, ipsAuthCredChapRowStatus } STATUS current DESCRIPTION "A collection of objects providing information about CHAP credentials within user identities within an authentication instance." ::= { ipsAuthGroups 6 } ipsAuthIdentSrpAttrGroup OBJECT-GROUP OBJECTS { ipsAuthCredSrpUserName, ipsAuthCredSrpPassword, ipsAuthCredSrpRowStatus } STATUS current DESCRIPTION "A collection of objects providing information about SRP credentials within user identities within an authentication instance." ::= { ipsAuthGroups 7 } ipsAuthIdentKerberosAttrGroup OBJECT-GROUP OBJECTS { ipsAuthCredKerbPrincipal, ipsAuthCredKerbRowStatus } STATUS current DESCRIPTION "A collection of objects providing information about Kerberos credentials within user identities within an authentication instance." ::= { ipsAuthGroups 8 } ------------------------------------------------------------------------ ipsAuthCompliances OBJECT IDENTIFIER ::= { ipsAuthConformance 2 } ipsAuthComplianceV1 MODULE-COMPLIANCE STATUS current DESCRIPTION "Initial version of compliance statement based on initial version of MIB. The Instance and Identity groups are mandatory; at least one of the other groups (Name, Address, Credential, Certificate) is also mandatory for any given implementation." MODULE -- this module MANDATORY-GROUPS { ipsAuthInstanceAttributesGroup, ipsAuthIdentAttributesGroup } -- Conditionally mandatory groups to be included with -- the mandatory groups when necessary. GROUP ipsAuthIdentNameAttributesGroup DESCRIPTION "This group is mandatory for all implementations that make use of unique identity names." GROUP ipsAuthIdentAddrAttributesGroup DESCRIPTION "This group is mandatory for all implementations that use addresses to help authenticate identities." GROUP ipsAuthIdentCredAttributesGroup DESCRIPTION "This group is mandatory for all implementations that use credentials to help authenticate identities." GROUP ipsAuthIdentChapAttrGroup DESCRIPTION "This group is mandatory for all implementations that use CHAP to help authenticate identities. The ipsAuthIdentCredAttributesGroup must be implemented if this group is implemented." GROUP ipsAuthIdentSrpAttrGroup DESCRIPTION "This group is mandatory for all implementations that use SRP to help authenticate identities. The ipsAuthIdentCredAttributesGroup must be implemented if this group is implemented." GROUP ipsAuthIdentKerberosAttrGroup DESCRIPTION "This group is mandatory for all implementations that use Kerberos to help authenticate identities. The ipsAuthIdentCredAttributesGroup must be implemented if this group is implemented." OBJECT ipsAuthInstDescr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ipsAuthIdentDescription MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ipsAuthIdentRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." OBJECT ipsAuthIdentName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ipsAuthIdentNameRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." OBJECT ipsAuthIdentAddrType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ipsAuthIdentAddrStart MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ipsAuthIdentAddrEnd MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ipsAuthIdentAddrRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." OBJECT ipsAuthCredAuthMethod MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ipsAuthCredRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." OBJECT ipsAuthCredChapUserName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ipsAuthCredChapPassword MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ipsAuthCredChapRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." OBJECT ipsAuthCredSrpUserName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ipsAuthCredSrpPassword MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ipsAuthCredSrpRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." OBJECT ipsAuthCredKerbPrincipal MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ipsAuthCredKerbRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." ::= { ipsAuthCompliances 1 } END