-- extracted from draft-thaler-idmr-multiproto-pimmib-00.txt -- at Mon Jun 12 10:51:24 2000 PIMG-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, experimental, NOTIFICATION-TYPE, Integer32, TimeTicks FROM SNMPv2-SMI RowStatus, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF inetMRouteGroupType, inetMRouteGroup, inetMRouteGroupMaskLen, inetMRouteSourceType, inetMRouteSource, inetMRouteSourceMaskLen, inetMRouteNextHopGroupType, inetMRouteNextHopGroup, inetMRouteNextHopSourceType, inetMRouteNextHopSource, inetMRouteNextHopSourceMaskLen, inetMRouteNextHopIfIndex, inetMRouteNextHopAddressType, inetMRouteNextHopAddress FROM INETMROUTE-STD-MIB InterfaceIndex FROM IF-MIB InetAddress, InetAddressType FROM INET-ADDRESS-MIB; pimgMIB MODULE-IDENTITY LAST-UPDATED "200003091200Z" -- March 9, 2000 ORGANIZATION "IETF IDMR Working Group." CONTACT-INFO " Dave Thaler Microsoft Corporation One Microsoft Way Redmond, WA 98052-6399 US Phone: +1 425 703 8835 EMail: dthaler@dthaler.microsoft.com Andrew Adams Merit Network, Inc. 4251 Plymouth Rd. Ann Arbor, MI 48105-2785 Phone: +1 734 763-6378 EMail: ala@merit.edu William Siadak Merit Network, Inc. 4251 Plymouth Rd. Ann Arbor, MI 48105-2785 Phone: +1 734 936 2035 EMail: wfs@merit.edu" DESCRIPTION "The MIB module for management of PIM routers." REVISION "200003091200Z" -- March 9, 2000 DESCRIPTION "Initial version, published as RFC xxxx (to be filled in by RFC-Editor)." ::= { experimental XX } pimgMIBObjects OBJECT IDENTIFIER ::= { pimgMIB 1 } pimgTraps OBJECT IDENTIFIER ::= { pimgMIBObjects 0 } pimg OBJECT IDENTIFIER ::= { pimgMIBObjects 1 } pimgJoinPruneInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The default interval at which periodic PIM-SM Join/Prune messages are to be sent." ::= { pimg 1 } -- The PIM Interface Table pimgInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF PimgInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's PIM interfaces. IGMP and PIM are enabled on all interfaces listed in this table." ::= { pimg 2 } pimgInterfaceEntry OBJECT-TYPE SYNTAX PimgInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimgInterfaceTable." INDEX { pimgInterfaceIfIndex } ::= { pimgInterfaceTable 1 } PimgInterfaceEntry ::= SEQUENCE { pimgInterfaceIfIndex InterfaceIndex, pimgInterfaceAddressType InetAddressType, pimgInterfaceAddress InetAddress, pimgInterfaceNetMaskLen INTEGER, pimgInterfaceMode INTEGER, pimgInterfaceDRType InetAddressType, pimgInterfaceDR InetAddress, pimgInterfaceHelloInterval Integer32, pimgInterfaceStatus RowStatus, pimgInterfaceJoinPruneInterval Integer32, pimgInterfaceCBSRPreference Integer32 } pimgInterfaceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of this PIM interface." ::= { pimgInterfaceEntry 1 } pimgInterfaceAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "A value indicating the address family of the address contained in pimgInterfaceAddress. Legal values correspond to the subset of address families for which PIM routing is supported." ::= { pimgInterfaceEntry 2 } pimgInterfaceAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the PIM interface." ::= { pimgInterfaceEntry 3 } pimgInterfaceNetMaskLen OBJECT-TYPE SYNTAX INTEGER (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The length in bits of the network mask which when combined with the corresponding value of pimgInterfaceAddress identifies the address of the network to which the PIM interface is attached." ::= { pimgInterfaceEntry 4 } pimgInterfaceMode OBJECT-TYPE SYNTAX INTEGER { dense(1), sparse(2), sparseDense(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1." DEFVAL { dense } ::= { pimgInterfaceEntry 5 } pimgInterfaceDRType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "A value indicating the address family of the address contained in pimgInterfaceDR. The value MUST be the same as the value of pimgInterfaceAddressType." ::= { pimgInterfaceEntry 6 } pimgInterfaceDR OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Designated Router on this PIM interface. For point-to-point interfaces, pimgInterfaceDR will be 0.0.0.0 in the case of an IPv4 entry, and 0:0:0:0:0:0:0:0 in the case of an IPv6 entry." ::= { pimgInterfaceEntry 7 } pimgInterfaceHelloInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The frequency at which PIM Hello messages are transmitted on this interface." DEFVAL { 30 } ::= { pimgInterfaceEntry 8 } pimgInterfaceStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface." ::= { pimgInterfaceEntry 9 } pimgInterfaceJoinPruneInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pimgJoinPruneInterval." ::= { pimgInterfaceEntry 10 } pimgInterfaceCBSRPreference OBJECT-TYPE SYNTAX Integer32 (-1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate BSR interface." DEFVAL { 0 } ::= { pimgInterfaceEntry 11 } -- The PIM Neighbor Table pimgNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF PimgNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's PIM neighbors." ::= { pimg 3 } pimgNeighborEntry OBJECT-TYPE SYNTAX PimgNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimgNeighborTable." INDEX { pimgNeighborAddressType, pimgNeighborAddress } ::= { pimgNeighborTable 1 } PimgNeighborEntry ::= SEQUENCE { pimgNeighborAddressType InetAddressType, pimgNeighborAddress InetAddress, pimgNeighborIfIndex InterfaceIndex, pimgNeighborUpTime TimeTicks, pimgNeighborExpiryTime TimeTicks, pimgNeighborMode INTEGER } pimgNeighborAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "A value indicating the address family of the address contained in pimgNeighborAddress. Legal values correspond to the subset of address families for which PIM routing is supported." ::= { pimgNeighborEntry 1 } pimgNeighborAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the PIM neighbor for which this entry contains information." ::= { pimgNeighborEntry 2 } pimgNeighborIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the interface used to reach this PIM neighbor." ::= { pimgNeighborEntry 3 } pimgNeighborUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this PIM neighbor (last) became a neighbor of the local router." ::= { pimgNeighborEntry 4 } pimgNeighborExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum time remaining before this PIM neighbor will be aged out." ::= { pimgNeighborEntry 5 } pimgNeighborMode OBJECT-TYPE SYNTAX INTEGER { dense(1), sparse(2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The active PIM mode of this neighbor. This object is deprecated for PIMv2 routers since all neighbors on the interface must be either dense or sparse as determined by the protocol running on the interface." ::= { pimgNeighborEntry 6 } -- -- The PIM IP Multicast Route Table -- pimgInetMRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF PimgInetMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing PIM-specific information on a subset of the rows of the inetMRouteTable defined in the Inet Multicast MIB." ::= { pimg 4 } pimgInetMRouteEntry OBJECT-TYPE SYNTAX PimgInetMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimgInetMRouteTable. There is one entry per entry in the inetMRouteTable whose incoming interface is running PIM." INDEX { inetMRouteGroupType, inetMRouteGroup, inetMRouteGroupMaskLen, inetMRouteSourceType, inetMRouteSource, inetMRouteSourceMaskLen } ::= { pimgInetMRouteTable 1 } PimgInetMRouteEntry ::= SEQUENCE { pimgInetMRouteUpstreamAssertTimer TimeTicks, pimgInetMRouteAssertMetric Integer32, pimgInetMRouteAssertMetricPref Integer32, pimgInetMRouteAssertRPTBit TruthValue, pimgInetMRouteFlags BITS } pimgInetMRouteUpstreamAssertTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense mode specification. A value of 0 indicates that no Assert has changed the upstream neighbor away from the RPF neighbor." ::= { pimgInetMRouteEntry 1 } pimgInetMRouteAssertMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received." ::= { pimgInetMRouteEntry 2 } pimgInetMRouteAssertMetricPref OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect." ::= { pimgInetMRouteEntry 3 } pimgInetMRouteAssertRPTBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect." ::= { pimgInetMRouteEntry 4 } pimgInetMRouteFlags OBJECT-TYPE SYNTAX BITS { rpt(0), spt(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes PIM-specific flags related to a multicast state entry. See the PIM Sparse Mode specification for the meaning of the RPT and SPT bits." ::= { pimgInetMRouteEntry 5 } -- -- The PIM Next Hop Table -- pimgInetMRouteNextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF PimgInetMRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing PIM-specific information on a subset of the rows of the inetMRouteNextHopTable defined in the IP Multicast MIB." ::= { pimg 7 } pimgInetMRouteNextHopEntry OBJECT-TYPE SYNTAX PimgInetMRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimgInetMRouteNextHopTable. There is one entry per entry in the inetMRouteNextHopTable whose interface is running PIM and whose inetMRouteNextHopState is pruned(1)." INDEX { inetMRouteNextHopGroupType, inetMRouteNextHopGroup, inetMRouteNextHopSourceType, inetMRouteNextHopSource, inetMRouteNextHopSourceMaskLen, inetMRouteNextHopIfIndex, inetMRouteNextHopAddressType, inetMRouteNextHopAddress } ::= { pimgInetMRouteNextHopTable 1 } PimgInetMRouteNextHopEntry ::= SEQUENCE { pimgInetMRouteNextHopPruneReason INTEGER } pimgInetMRouteNextHopPruneReason OBJECT-TYPE SYNTAX INTEGER { other (1), prune (2), assert (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing." ::= { pimgInetMRouteNextHopEntry 2 } -- The PIM RP Table pimgRPTable OBJECT-TYPE SYNTAX SEQUENCE OF PimgRPEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The (conceptual) table listing PIM version 1 information for the Rendezvous Points (RPs) for multicast groups. This table is deprecated since its function is replaced by the pimgRPSetTable for PIM version 2." ::= { pimg 5 } pimgRPEntry OBJECT-TYPE SYNTAX PimgRPEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry (conceptual row) in the pimgRPTable. There is one entry per RP address for each multicast group." INDEX { pimgRPGroupAddressType, pimgRPGroupAddress, pimgRPAddressType, pimgRPAddress } ::= { pimgRPTable 1 } PimgRPEntry ::= SEQUENCE { pimgRPGroupAddressType InetAddressType, pimgRPGroupAddress InetAddress, pimgRPAddressType InetAddressType, pimgRPAddress InetAddress, pimgRPState INTEGER, pimgRPStateTimer TimeTicks, pimgRPLastChange TimeTicks, pimgRPRowStatus RowStatus } pimgRPGroupAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A value indicating the address family of the address contained in pimgRPGroupAddress. Legal values are: unknown(0), ipv4(1), ipv6(2), dns(16)" ::= { pimgRPEntry 1 } pimgRPGroupAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The multicast group address for which this entry contains information about an RP." ::= { pimgRPEntry 2 } pimgRPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A value indicating the address family of the address contained in pimgRPAddress. The value MUST be the same as the value of pimgRPGroupAddressType." ::= { pimgRPEntry 3 } pimgRPAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The unicast address of the RP." ::= { pimgRPEntry 4 } pimgRPState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The state of the RP." ::= { pimgRPEntry 5 } pimgRPStateTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The minimum time remaining before the next state change. When pimgRPState is up, this is the minimum time which must expire until it can be declared down. When pimgRPState is down, this is the time until it will be declared up (in order to retry)." ::= { pimgRPEntry 6 } pimgRPLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The value of sysUpTime at the time when the corresponding instance of pimgRPState last changed its value." ::= { pimgRPEntry 7 } pimgRPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { pimgRPEntry 8 } -- The PIM RP-Set Table pimgRPSetTable OBJECT-TYPE SYNTAX SEQUENCE OF PimgRPSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for multicast groups. When the local router is the BSR, this information is obtained from received Candidate-RP- Advertisements. When the local router is not the BSR, this information is obtained from received RP- Set messages." ::= { pimg 6 } pimgRPSetEntry OBJECT-TYPE SYNTAX PimgRPSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimgRPSetTable." INDEX { pimgRPSetComponent, pimgRPSetGroupAddressType, pimgRPSetGroupAddress, pimgRPSetGroupMaskLen, pimgRPSetAddressType, pimgRPSetAddress } ::= { pimgRPSetTable 1 } PimgRPSetEntry ::= SEQUENCE { pimgRPSetGroupAddressType InetAddressType, pimgRPSetGroupAddress InetAddress, pimgRPSetGroupMaskLen INTEGER, pimgRPSetAddressType InetAddressType, pimgRPSetAddress InetAddress, pimgRPSetHoldTime Integer32, pimgRPSetExpiryTime TimeTicks, pimgRPSetComponent Integer32 } pimgRPSetGroupAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "A value indicating the address family of the address contained in pimgRPSetGroupAddress. Legal values correspond to the subset of address families for which PIM routing is supported." ::= { pimgRPSetEntry 1 } pimgRPSetGroupAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address which, when combined with the value of pimgRPSetGroupMaskLen, gives the group prefix for which this entry contains information about the Candidate-RP." ::= { pimgRPSetEntry 2 } pimgRPSetGroupMaskLen OBJECT-TYPE SYNTAX INTEGER (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The length in bits of the mask which, when combined with pimgRPSetGroupAddress, gives the group prefix for which this entry contains information about the Candidate-RP." ::= { pimgRPSetEntry 3 } pimgRPSetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "A value indicating the address family of the address contained in pimgRPSetAddress. The value MUST be the same as the value of pimgRPSetGroupAddressType." ::= { pimgRPSetEntry 4 } pimgRPSetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the Candidate-RP." ::= { pimgRPSetEntry 5 } pimgRPSetHoldTime OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0." ::= { pimgRPSetEntry 6 } pimgRPSetExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0." ::= { pimgRPSetEntry 7 } pimgRPSetComponent OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value." ::= { pimgRPSetEntry 8 } -- The PIM Candidate-RP Table pimgCandidateRPTable OBJECT-TYPE SYNTAX SEQUENCE OF PimgCandidateRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of pimgComponentCRPHoldTime is non-zero. If this table is empty, then the local router will advertise itself as a Candidate-RP for all groups (providing the value of pimgComponentCRPHoldTime is non-zero)." ::= { pimg 11 } pimgCandidateRPEntry OBJECT-TYPE SYNTAX PimgCandidateRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimgCandidateRPTable." INDEX { pimgCandidateRPGroupAddressType, pimgCandidateRPGroupAddress, pimgCandidateRPGroupMaskLen } ::= { pimgCandidateRPTable 1 } PimgCandidateRPEntry ::= SEQUENCE { pimgCandidateRPGroupAddressType InetAddressType, pimgCandidateRPGroupAddress InetAddress, pimgCandidateRPGroupMaskLen INTEGER, pimgCandidateRPAddressType InetAddressType, pimgCandidateRPAddress InetAddress, pimgCandidateRPRowStatus RowStatus } pimgCandidateRPGroupAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "A value indicating the address family of the address contained in pimgCandidateRPGroupAddress. Legal values correspond to the subset of address families for which PIM routing is supported." ::= { pimgCandidateRPEntry 1 } pimgCandidateRPGroupAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address which, when combined with the corresponding value of pimgCandidateRPGroupMaskLen, identifies a group prefix for which the local router will advertise itself as a Candidate-RP." ::= { pimgCandidateRPEntry 2 } pimgCandidateRPGroupMaskLen OBJECT-TYPE SYNTAX INTEGER (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The length in bits of the mask which, when combined with pimgCandidateRPGroupAddress, identifies a group prefix for which the local router will advertise itself as a Candidate-RP." ::= { pimgCandidateRPEntry 3 } pimgCandidateRPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "A value indicating the address family of the address contained in pimgCandidateRPAddress. The value MUST be the same as the value of pimgCandidateRPGroupAddressType." ::= { pimgCandidateRPEntry 4 } pimgCandidateRPAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The (unicast) address of the interface which will be advertised as a Candidate-RP." ::= { pimgCandidateRPEntry 5 } pimgCandidateRPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { pimgCandidateRPEntry 6 } -- The PIM Component Table pimgComponentTable OBJECT-TYPE SYNTAX SEQUENCE OF PimgComponentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected. A PIM-SM domain is defined as an area of the network over which Bootstrap messages are forwarded. Typically, a PIM- SM router will be a member of exactly one domain. This table also supports, however, routers which may form a border between two PIM-SM domains and do not forward Bootstrap messages between them." ::= { pimg 12 } pimgComponentEntry OBJECT-TYPE SYNTAX PimgComponentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimgComponentTable." INDEX { pimgComponentIndex } ::= { pimgComponentTable 1 } PimgComponentEntry ::= SEQUENCE { pimgComponentIndex Integer32, pimgComponentBSRAddressType InetAddressType, pimgComponentBSRAddress InetAddress, pimgComponentBSRExpiryTime TimeTicks, pimgComponentCRPHoldTime Integer32, pimgComponentStatus RowStatus } pimgComponentIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Routers that only support membership in a single PIM-SM domain should use a pimgComponentIndex value of 1." ::= { pimgComponentEntry 1 } pimgComponentBSRAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "A value indicating the address family of the address contained in pimgComponentBSRAddress. Legal values correspond to the subset of address families for which PIM routing is supported." ::= { pimgComponentEntry 2 } pimgComponentBSRAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the bootstrap router (BSR) for the local PIM region." ::= { pimgComponentEntry 3 } pimgComponentBSRExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum time remaining before the bootstrap router in the local domain will be declared down. For candidate BSRs, this is the time until the component sends an RP-Set message. For other routers, this is the time until it may accept an RP-Set message from a lower candidate BSR." ::= { pimgComponentEntry 4 } pimgComponentCRPHoldTime OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The holdtime of the component when it is a candidate RP in the local domain. The value of 0 is used to indicate that the local system is not a Candidate-RP." DEFVAL { 0 } ::= { pimgComponentEntry 5 } pimgComponentStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry. Creating the entry creates another protocol instance; destroying the entry disables a protocol instance." ::= { pimgComponentEntry 6 } -- PIM Traps pimgNeighborLoss NOTIFICATION-TYPE OBJECTS { pimgNeighborIfIndex } STATUS current DESCRIPTION "A pimgNeighborLoss trap signifies the loss of an adjacency with a neighbor. This trap should be generated when the neighbor timer expires, and the router has no other neighbors on the same interface with a lower IP address than itself." ::= { pimgTraps 1 } -- conformance information pimgMIBConformance OBJECT IDENTIFIER ::= { pimgMIB 2 } pimgMIBCompliances OBJECT IDENTIFIER ::= { pimgMIBConformance 1 } pimgMIBGroups OBJECT IDENTIFIER ::= { pimgMIBConformance 2 } -- compliance statements pimgV1MIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for routers running PIMv1 and implementing the PIM MIB." MODULE -- this module MANDATORY-GROUPS { pimgV1MIBGroup } ::= { pimgMIBCompliances 1 } pimgSparseV2MIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for routers running PIM Sparse Mode and implementing the PIM MIB." MODULE -- this module MANDATORY-GROUPS { pimgV2MIBGroup } GROUP pimgV2CandidateRPMIBGroup DESCRIPTION "This group is mandatory if the router is capable of being a Candidate RP." OBJECT pimgInterfaceStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { pimgMIBCompliances 2 } pimgDenseV2MIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for routers running PIM Dense Mode and implementing the PIM MIB." MODULE -- this module MANDATORY-GROUPS { pimgDenseV2MIBGroup } OBJECT pimgInterfaceStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { pimgMIBCompliances 3 } -- units of conformance pimgNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { pimgNeighborLoss } STATUS current DESCRIPTION "A collection of notifications for signaling important PIM events." ::= { pimgMIBGroups 1 } pimgV2MIBGroup OBJECT-GROUP OBJECTS { pimgJoinPruneInterval, pimgNeighborIfIndex, pimgNeighborUpTime, pimgNeighborExpiryTime, pimgInterfaceAddressType, pimgInterfaceAddress, pimgInterfaceNetMaskLen, pimgInterfaceDRType, pimgInterfaceDR, pimgInterfaceHelloInterval, pimgInterfaceStatus, pimgInterfaceJoinPruneInterval, pimgInterfaceCBSRPreference, pimgInterfaceMode, pimgRPSetHoldTime, pimgRPSetExpiryTime, pimgComponentBSRAddressType, pimgComponentBSRAddress, pimgComponentBSRExpiryTime, pimgComponentCRPHoldTime, pimgComponentStatus, pimgInetMRouteFlags, pimgInetMRouteUpstreamAssertTimer } STATUS current DESCRIPTION "A collection of objects to support management of PIM Sparse Mode (version 2) routers." ::= { pimgMIBGroups 2 } pimgDenseV2MIBGroup OBJECT-GROUP OBJECTS { pimgNeighborIfIndex, pimgNeighborUpTime, pimgNeighborExpiryTime, pimgInterfaceAddressType, pimgInterfaceAddress, pimgInterfaceNetMaskLen, pimgInterfaceDRType, pimgInterfaceDR, pimgInterfaceHelloInterval, pimgInterfaceStatus, pimgInterfaceMode } STATUS current DESCRIPTION "A collection of objects to support management of PIM Dense Mode (version 2) routers." ::= { pimgMIBGroups 7 } pimgV2CandidateRPMIBGroup OBJECT-GROUP OBJECTS { pimgCandidateRPAddressType, pimgCandidateRPAddress, pimgCandidateRPRowStatus } STATUS current DESCRIPTION "A collection of objects to support configuration of which groups a router is to advertise itself as a Candidate-RP." ::= { pimgMIBGroups 3 } pimgV1MIBGroup OBJECT-GROUP OBJECTS { pimgJoinPruneInterval, pimgNeighborIfIndex, pimgNeighborUpTime, pimgNeighborExpiryTime, pimgNeighborMode, pimgInterfaceAddressType, pimgInterfaceAddress, pimgInterfaceNetMaskLen, pimgInterfaceJoinPruneInterval, pimgInterfaceStatus, pimgInterfaceMode, pimgInterfaceDRType, pimgInterfaceDR, pimgInterfaceHelloInterval, pimgRPState, pimgRPStateTimer, pimgRPLastChange, pimgRPRowStatus } STATUS deprecated DESCRIPTION "A collection of objects to support management of PIM (version 1) routers." ::= { pimgMIBGroups 4 } pimgNextHopGroup OBJECT-GROUP OBJECTS { pimgInetMRouteNextHopPruneReason } STATUS current DESCRIPTION "A collection of optional objects to provide per- next hop information for diagnostic purposes. Supporting this group may add a large number of instances to a tree walk, but the information in this group can be extremely useful in tracking down multicast connectivity problems." ::= { pimgMIBGroups 5 } pimgAssertGroup OBJECT-GROUP OBJECTS { pimgInetMRouteAssertMetric, pimgInetMRouteAssertMetricPref, pimgInetMRouteAssertRPTBit } STATUS current DESCRIPTION "A collection of optional objects to provide extra information about the assert election process. There is no protocol reason to keep such information, but some implementations may already keep this information and make it available. These objects can also be very useful in debugging connectivity or duplicate packet problems, especially if the assert winner does not support the PIM and Inet Multicast MIBs." ::= { pimgMIBGroups 6 } END -- -- Copyright (C) The Internet Society (2000). All Rights Reserved. -- -- This document and translations of it may be copied and furnished to -- others, and derivative works that comment on or otherwise explain it -- or assist in its implementation may be prepared, copied, published -- and distributed, in whole or in part, without restriction of any -- -- Thaler,Adams,Siadak Experimental/Expires Dec 2000 27 -- draft-thaler-idmr-multiproto-pimmib-1 June, 2000 -- -- -- kind, provided that the above copyright notice and this paragraph -- are included on all such copies and derivative works. However, this -- document itself may not be modified in any way, such as by removing -- the copyright notice or references to the Internet Society or other -- Internet organizations, except as needed for the purpose of -- developing Internet standards in which case the procedures for -- copyrights defined in the Internet Standards process must be -- followed, or as required to translate it into languages other than -- English. -- -- The limited permissions granted above are perpetual and will not be -- revoked by the Internet Society or its successors or assigns. -- -- This document and the information contained herein is provided on an -- "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING -- TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING -- BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION -- HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF -- MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -- --