-- extracted from draft-ietf-pwe3-pw-mpls-mib-01.txt -- at Fri May 14 06:21:10 2004 PW-MPLS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, experimental, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF RowStatus, StorageType FROM SNMPv2-TC InterfaceIndexOrZero FROM IF-MIB MplsTunnelIndex, MplsTunnelInstanceIndex, MplsLdpIdentifier, MplsLsrIdentifier FROM MPLS-TC-MIB PwVcIndexType FROM PW-TC-MIB pwVcIndex FROM PW-MIB ; pwVcMplsMIB MODULE-IDENTITY LAST-UPDATED "200206021200Z" -- 02 June 2002 12:00:00 EST ORGANIZATION "Pseudo Wire Edge to Edge Emulation (PWE3) Working Group" CONTACT-INFO " David Zelig Postal: Corrigent Systems 126, Yigal Alon St. Tel Aviv, ISRAEL Phone: +972-3-6945273 E-mail: davidz@corrigent.com Thomas D. Nadeau Postal: Cisco Systems, Inc. 250 Apollo Drive Chelmsford, MA 01824 Tel: +1-978-497-3051 Email: tnadeau@cisco.com Dave Danenberg Pseudo Wire (PW) Over MPLS June 2003 Management Information Base Postal: Litchfield Communications, Inc. 76 Westbury Park Rd Princeton Building East Watertown, CT 06795 Tel: +1-860-945-1573 x3180 Email: dave_danenberg@litchfieldcomm.com Sharon Mantin Postal: AxONLink (Israel) Ltd 9 Bareket St. Petah Tikva 49517, Israel Tel: +972-3-9263972 Email: sharon.mantin@axonlink.com The PWE3 Working Group (email distribution pwe3@ietf.org) " DESCRIPTION "This MIB complements the PW-MIB for PW operation over MPLS. " -- Revision history. REVISION "200206021200Z" -- 02 June 2002 12:00:00 EST DESCRIPTION "Draft-ietf-pwe3-pw-mpls-mib-00 version. Changes from previous version: 1) Spliting the mapping table into two tables, one for Non TE application and one for TE application. 2) Object types alignment with MPLS MIBs. " REVISION "200201291200Z" -- 29 January 2002 12:00:00 EST DESCRIPTION "Changes from previous version: 1) Add LDP entity association. 2) Clarify inbound/outbound directions. 3) Simplify indexing of outbound and inbound tables and providing get next variables. " REVISION "200107111200Z" -- 7 November 2001 12:00:00 EST DESCRIPTION "Changes from previous version: 1) Remove Vc instance from table indexing. 2) Update descriptions of indexing and protection. 3) Remove the need for MPLS-LSR in case of VC only. 4) Change pwVcMplsMplsType to BITS in order to enable multiple types of outer tunnel. 5) Add ifindex to outer tunnel tables to support vcOnly option. Pseudo Wire (PW) Over MPLS June 2003 Management Information Base 6) change naming of outbound, inbound and mapping tables to reflect addition of VC only port ifindexes. 7) Adapt order of items in mapping table to SNMP convention. " REVISION "200107111200Z" -- July 11 2001 12:00:00 EST DESCRIPTION "draft-zelig-pw-mib-00.txt - initial version" ::= { experimental xxx } -- To be assigned by IANA -- Top-level components of this MIB. -- Traps pwVcMplsNotifications OBJECT IDENTIFIER ::= { pwVcMplsMIB 0 } pwVcMplsNotifyPrefix OBJECT IDENTIFIER ::= { pwVcMplsNotifications 0 } -- Tables, Scalars pwVcMplsObjects OBJECT IDENTIFIER ::= { pwVcMplsMIB 1 } -- Conformance pwVcMplsConformance OBJECT IDENTIFIER ::= { pwVcMplsMIB 2 } -- PW VC MPLS table pwVcMplsTable OBJECT-TYPE SYNTAX SEQUENCE OF PwVcMplsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for VC to be carried over MPLS PSN." ::= { pwVcMplsObjects 1 } pwVcMplsEntry OBJECT-TYPE SYNTAX PwVcMplsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents parameters specific to MPLS PSN for a pseudo wire connection (VC). The row is created automatically by the local agent if the pwVcPsnType is MPLS. It is indexed by pwVcIndex, which uniquely identifying a singular connection. " INDEX { pwVcIndex } Pseudo Wire (PW) Over MPLS June 2003 Management Information Base ::= { pwVcMplsTable 1 } PwVcMplsEntry ::= SEQUENCE { pwVcMplsMplsType BITS, pwVcMplsExpBitsMode INTEGER, pwVcMplsExpBits Unsigned32, pwVcMplsTtl Unsigned32, pwVcMplsLocalLdpID MplsLdpIdentifier, pwVcMplsLocalLdpEntityID Unsigned32, pwVcMplsPeerLdpID MplsLdpIdentifier, pwVcMplsStorageType StorageType } pwVcMplsMplsType OBJECT-TYPE SYNTAX BITS { mplsTe (0), mplsNonTe (1), vcOnly (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set by the operator to indicate the outer tunnel types, if exists. mplsTe is used if the outer tunnel was set-up by MPLS-TE, and mplsNonTe is used the outer tunnel was set up by LDP or manually. Combination of mplsTe and mplsNonTe may exist in case of outer tunnel protection. vcOnly is used if there is no outer tunnel label. vcOnly cannot be combined with mplsNonTe or mplsTe." ::= { pwVcMplsEntry 1 } pwVcMplsExpBitsMode OBJECT-TYPE SYNTAX INTEGER { outerTunnel (1), specifiedValue (2), serviceDependant (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set by the operator to indicate the way the VC shim label EXP bits are to be determined. The value of outerTunnel(1) is used where there is an outer tunnel - pwVcMplsMplsType is mplsTe or mplsNonTe. Note that in this case there is no need to mark the VC label with the EXP bits since the VC label is not visible to the intermediate nodes. If there is no outer tunnel, specifiedValue(2) indicate that the value is specified by pwVcMplsExpBits, and serviceDependant(3) indicate that the EXP bits are setup Pseudo Wire (PW) Over MPLS June 2003 Management Information Base based on a rule specified in the emulated service specific tables, for example when the EXP bits are a function of 802.1p marking for Ethernet emulated service." REFERENCE "martini et al, " DEFVAL { outerTunnel } ::= { pwVcMplsEntry 2 } pwVcMplsExpBits OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Set by the operator to indicate the MPLS EXP bits to be used on the VC shim label if pwVcMplsExpBitsMode is specifiedValue(2), zero otherwise." DEFVAL { 0 } ::= { pwVcMplsEntry 3 } pwVcMplsTtl OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Set by the operator to indicate the VC TTL bits to be used on the VC shim label." REFERENCE "martini et al, " DEFVAL { 2 } ::= { pwVcMplsEntry 4 } pwVcMplsLocalLdpID OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS read-write STATUS current DESCRIPTION "The local LDP identifier of the LDP entity creating this VC in the local node. As the VC labels are always set from the per platform label space, the last two octets in the LDP ID MUST be always both zeros." REFERENCE ", . " ::= { pwVcMplsEntry 5 } pwVcMplsLocalLdpEntityID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION Pseudo Wire (PW) Over MPLS June 2003 Management Information Base "The local LDP Entity index of the LDP entity to be used for this VC on the local node. Should be set to all zeros if not used." REFERENCE " " ::= { pwVcMplsEntry 6 } pwVcMplsPeerLdpID OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The peer LDP identifier as identified from the LDP session. Should be zero if not relevant or not known yet." REFERENCE ", . " ::= { pwVcMplsEntry 7 } pwVcMplsStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the storage type for this row." ::= { pwVcMplsEntry 8 } -- End of PW MPLS VC table -- Pseudo Wire VC MPLS Outbound Tunnel table pwVcMplsOutboundIndexNext OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for pwVcMplsOutboundIndex when creating entries in the pwVcMplsOutboundTable. The value 0 indicates that no unassigned entries are available. To obtain the pwVcMplsOutboundIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index, however the agent MUST NOT assume such retrieval will be done for each row created." ::= { pwVcMplsObjects 2 } Pseudo Wire (PW) Over MPLS June 2003 Management Information Base pwVcMplsOutboundTable OBJECT-TYPE SYNTAX SEQUENCE OF PwVcMplsOutboundEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table associates VCs using MPLS PSN with the outbound MPLS tunnels (i.e. toward the PSN) or the physical interface in case of VC only." ::= { pwVcMplsObjects 3 } pwVcMplsOutboundEntry OBJECT-TYPE SYNTAX PwVcMplsOutboundEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents a link between PW VC (that require MPLS tunnels) and MPLS tunnel toward the PSN. In the case of VC only, it associate the VC with the interface that shall carry the VC. This table is indexed by the pwVcIndex and an additional index enabling multiple rows for the same VC index. At least one entry is created in this table by the operator for each PW VC that requires MPLS PSN. Note that the first entry for each VC can be indexed by pwVcMplsOutboundIndex equal zero without a need for retrieval of pwVcMplsOutboundIndexNext. This table points to the appropriate MPLS MIB. In the case of MPLS-TE, the 4 variables relevant to the indexing of a TE MPLS tunnel are set as in Srinivasan, et al, . In case of Non-TE MPLS (an outer tunnel label assigned by LDP or manually) the table points to the XC entry in the LSR MIB as in Srinivasan, et al, . In case of VC only (no outer tunnel) the ifIndex of the port to carry the VC is configured. Each VC may have multiple rows in this tables if protection is available at the outer tunnel level, each row may be of different type except for VC only, on which only rows with ifIndex of the port are allowed. " INDEX { pwVcIndex, pwVcMplsOutboundIndex } ::= { pwVcMplsOutboundTable 1 } PwVcMplsOutboundEntry ::= SEQUENCE { pwVcMplsOutboundIndex Unsigned32, Pseudo Wire (PW) Over MPLS June 2003 Management Information Base pwVcMplsOutboundLsrXcIndex Unsigned32, pwVcMplsOutboundTunnelIndex MplsTunnelIndex, pwVcMplsOutboundTunnelInstance MplsTunnelInstanceIndex, pwVcMplsOutboundTunnelLclLSR MplsLsrIdentifier, pwVcMplsOutboundTunnelPeerLSR MplsLsrIdentifier, pwVcMplsOutboundIfIndex InterfaceIndexOrZero, pwVcMplsOutboundRowStatus RowStatus, pwVcMplsOutboundStorageType StorageType } pwVcMplsOutboundIndex OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Arbitrary index for enabling multiple rows per VC in this table. Next available free index can be retrieved using pwVcMplsOutboundIndexNext. " ::= { pwVcMplsOutboundEntry 1 } pwVcMplsOutboundLsrXcIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object will be set by the operator. If the outer label is defined in the MPL-LSR-MIB, i.e. set by LDP or manually, this object points to the XC index of the outer tunnel. Otherwise, it is set to zero." ::= { pwVcMplsOutboundEntry 2 } pwVcMplsOutboundTunnelIndex OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero." ::= { pwVcMplsOutboundEntry 3 } pwVcMplsOutboundTunnelInstance OBJECT-TYPE SYNTAX MplsTunnelInstanceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero." ::= { pwVcMplsOutboundEntry 4 } Pseudo Wire (PW) Over MPLS June 2003 Management Information Base pwVcMplsOutboundTunnelLclLSR OBJECT-TYPE SYNTAX MplsLsrIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero." ::= { pwVcMplsOutboundEntry 5 } pwVcMplsOutboundTunnelPeerLSR OBJECT-TYPE SYNTAX MplsLsrIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero." ::= { pwVcMplsOutboundEntry 6 } pwVcMplsOutboundIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "In case of VC only (no outer tunnel), this object holds the ifIndex of the outbound port, otherwise set to zero." ::= { pwVcMplsOutboundEntry 7 } pwVcMplsOutboundRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "For creating, modifying, and deleting this row." ::= { pwVcMplsOutboundEntry 8 } pwVcMplsOutboundStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the storage type for this object." ::= { pwVcMplsOutboundEntry 9 } -- End of Pseudo Wire VC MPLS Outbound Tunnel table -- Pseudo Wire VC MPLS Inbound Tunnel table pwVcMplsInboundIndexNext OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only Pseudo Wire (PW) Over MPLS June 2003 Management Information Base STATUS current DESCRIPTION "This object contains an appropriate value to be used for pwVcMplsInboundIndex when creating entries in the pwVcMplsInboundTable. The value 0 indicates that no unassigned entries are available. To obtain the pwVcMplsInboundIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index, however the agent MUST NOT assume such retrieval will be done for each row created." ::= { pwVcMplsObjects 4 } pwVcMplsInboundTable OBJECT-TYPE SYNTAX SEQUENCE OF PwVcMplsInboundEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table associates VCs using MPLS PSN with the inbound MPLS tunnels (i.e. for packets coming from the PSN), if such association is desired (mainly for security reasons)." ::= { pwVcMplsObjects 5 } pwVcMplsInboundEntry OBJECT-TYPE SYNTAX PwVcMplsInboundEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents a link between PW VCs (that require MPLS tunnels) and MPLS tunnel for packets arriving from the PSN. This table is indexed by the set of indexes used to identify the VC - pwVcIndex and an additional index enabling multiple rows for the same VC index. Note that the first entry for each VC can be indexed by pwVcMplsOutboundIndex equal zero without a need for retrieval of pwVcMplsInboundIndexNext. An entry is created in this table either automatically by the local agent or created manually by the operator in cases that strict mode is required. Note that the control messages contain VC ID and VC type, which together with the remote IP address identify the pwVcIndex in the local node. Pseudo Wire (PW) Over MPLS June 2003 Management Information Base This table points to the appropriate MPLS MIB. In the case of MPLS-TE, the 4 variables relevant to the indexing of a TE MPLS tunnel are set as in Srinivasan, et al, . In case of non-TE MPLS tunnel (an outer tunnel label assigned by LDP or manually) the table points to the XC entry in the MPLS-LSR-MIB as in Srinivasan, et al, . Each VC may have multiple rows in this tables if protection is available at the outer tunnel level, each row may be of different type except for VC only, on which only rows with ifIndex of the port are allowed. " INDEX { pwVcIndex, pwVcMplsInboundIndex } ::= { pwVcMplsInboundTable 1 } PwVcMplsInboundEntry ::= SEQUENCE { pwVcMplsInboundIndex Unsigned32, pwVcMplsInboundLsrXcIndex Unsigned32, pwVcMplsInboundTunnelIndex MplsTunnelIndex, pwVcMplsInboundTunnelInstance MplsTunnelInstanceIndex, pwVcMplsInboundTunnelLclLSR MplsLsrIdentifier, pwVcMplsInboundTunnelPeerLSR MplsLsrIdentifier, pwVcMplsInboundIfIndex InterfaceIndexOrZero, pwVcMplsInboundRowStatus RowStatus, pwVcMplsInboundStorageType StorageType } pwVcMplsInboundIndex OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Arbitrary index for enabling multiple rows per VC in this table. Next available free index can be retrieved using pwVcMplsInboundIndexNext. " ::= { pwVcMplsInboundEntry 1 } pwVcMplsInboundLsrXcIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "If the outer label is defined in the MPL-LSR-MIB, i.e. set by LDP or manually, this object points to the XC index of the outer tunnel. Otherwise, it is set to zero." Pseudo Wire (PW) Over MPLS June 2003 Management Information Base ::= { pwVcMplsInboundEntry 2 } pwVcMplsInboundTunnelIndex OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero." ::= { pwVcMplsInboundEntry 3 } pwVcMplsInboundTunnelInstance OBJECT-TYPE SYNTAX MplsTunnelInstanceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero." ::= { pwVcMplsInboundEntry 4 } pwVcMplsInboundTunnelLclLSR OBJECT-TYPE SYNTAX MplsLsrIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero." ::= { pwVcMplsInboundEntry 5 } pwVcMplsInboundTunnelPeerLSR OBJECT-TYPE SYNTAX MplsLsrIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero." ::= { pwVcMplsInboundEntry 6 } pwVcMplsInboundIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "In case of VC only (no outer tunnel), this object holds the ifIndex of the inbound port, otherwise set to zero." ::= { pwVcMplsInboundEntry 7 } pwVcMplsInboundRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create Pseudo Wire (PW) Over MPLS June 2003 Management Information Base STATUS current DESCRIPTION "For creating, modifying, and deleting this row." ::= { pwVcMplsInboundEntry 8 } pwVcMplsInboundStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the storage type for this row." ::= { pwVcMplsInboundEntry 9 } -- End of Pseudo Wire VC MPLS Inbound Tunnel table -- MPLS to VC Mapping Tables. pwVcMplsNonTeMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF PwVcMplsNonTeMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maps an inbound/outbound Tunnel to a VC in non- TE applications." ::= { pwVcMplsObjects 6 } pwVcMplsNonTeMappingEntry OBJECT-TYPE SYNTAX PwVcMplsNonTeMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents the association between the PW VC and it's non TE MPLS outer Tunnel it's physical interface if there is no outer tunnel (VC only). An application can use this table to quickly retrieve the PW carried over specific non-TE MPLS outer tunnel or physical interface. The table in indexed by the XC index for MPLS Non-TE tunnel, or ifIndex of the port in VC only case, the direction of the VC in the specific entry and the VCIndex. The same table is used in both inbound and outbound directions, but in a different row for each direction. If the inbound association is not known, no rows should exist for it. Rows are created by the local agent when all the Pseudo Wire (PW) Over MPLS June 2003 Management Information Base association data is available for display." INDEX { pwVcMplsNonTeMappingTunnelDirection, pwVcMplsNonTeMappingXcTunnelIndex, pwVcMplsNonTeMappingIfIndex, pwVcMplsNonTeMappingVcIndex } ::= { pwVcMplsNonTeMappingTable 1 } PwVcMplsNonTeMappingEntry ::= SEQUENCE { pwVcMplsNonTeMappingTunnelDirection INTEGER, pwVcMplsNonTeMappingXcTunnelIndex Unsigned32, pwVcMplsNonTeMappingIfIndex InterfaceIndexOrZero, pwVcMplsNonTeMappingVcIndex PwVcIndexType } pwVcMplsNonTeMappingTunnelDirection OBJECT-TYPE SYNTAX INTEGER { outbound (1), -- From the PE toward the PSN inbound (2) -- From the PSN into the PE } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies if the row represent an outbound or inbound mapping." ::= { pwVcMplsNonTeMappingEntry 1 } pwVcMplsNonTeMappingXcTunnelIndex OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the conceptual XC row identifying Tunnel to VC mappings when the outer tunnel is created by the MPLS-LSR- MIB, Zero otherwise." ::= { pwVcMplsNonTeMappingEntry 2 } pwVcMplsNonTeMappingIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identify the port on which the VC is carried for VC only case." ::= { pwVcMplsNonTeMappingEntry 3 } pwVcMplsNonTeMappingVcIndex OBJECT-TYPE SYNTAX PwVcIndexType MAX-ACCESS read-only Pseudo Wire (PW) Over MPLS June 2003 Management Information Base STATUS current DESCRIPTION "The value that represent the VC in the pwVcTable." ::= { pwVcMplsNonTeMappingEntry 4 } -- End of Non-TE MPLS Tunnel to VC Mapping Table pwVcMplsTeMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF PwVcMplsTeMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maps an inbound/outbound Tunnel to a VC in MPLS-TE applications." ::= { pwVcMplsObjects 7 } pwVcMplsTeMappingEntry OBJECT-TYPE SYNTAX PwVcMplsTeMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents the association between a PW VC and it's MPLS-TE outer Tunnel. An application can use this table to quickly retrieve the PW carried over specific TE MPLS outer tunnel. The table in indexed by the 4 indexes of a TE tunnel, the direction of the VC specific entry and the VcIndex. The same table is used in both inbound and outbound directions, a different row for each direction. If the inbound association is not known, no rows should exist for it. Rows are created by the local agent when all the association data is available for display." INDEX { pwVcMplsTeMappingTunnelDirection, pwVcMplsTeMappingTunnelIndex, pwVcMplsTeMappingTunnelInstance, pwVcMplsTeMappingTunnelPeerLsrID, pwVcMplsTeMappingTunnelLocalLsrID, pwVcMplsTeMappingVcIndex } ::= { pwVcMplsTeMappingTable 1 } PwVcMplsTeMappingEntry ::= SEQUENCE { pwVcMplsTeMappingTunnelDirection INTEGER, pwVcMplsTeMappingTunnelIndex MplsTunnelIndex, pwVcMplsTeMappingTunnelInstance MplsTunnelInstanceIndex, Pseudo Wire (PW) Over MPLS June 2003 Management Information Base pwVcMplsTeMappingTunnelPeerLsrID MplsLsrIdentifier, pwVcMplsTeMappingTunnelLocalLsrID MplsLsrIdentifier, pwVcMplsTeMappingVcIndex PwVcIndexType } pwVcMplsTeMappingTunnelDirection OBJECT-TYPE SYNTAX INTEGER { outbound (1), -- From the PE toward the PSN inbound (2) -- From the PSN into the PE } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies if the row represent an outbound or inbound mapping." ::= { pwVcMplsTeMappingEntry 1 } pwVcMplsTeMappingTunnelIndex OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Primary index for the conceptual row identifying the MPLS-TE tunnel." ::= { pwVcMplsTeMappingEntry 2 } pwVcMplsTeMappingTunnelInstance OBJECT-TYPE SYNTAX MplsTunnelInstanceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies an instance of the MPLS-TE tunnel." ::= { pwVcMplsTeMappingEntry 3 } pwVcMplsTeMappingTunnelPeerLsrID OBJECT-TYPE SYNTAX MplsLsrIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies an Peer LSR when the outer tunnel is MPLS-TE based." ::= { pwVcMplsTeMappingEntry 4 } pwVcMplsTeMappingTunnelLocalLsrID OBJECT-TYPE SYNTAX MplsLsrIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies the local LSR." ::= { pwVcMplsTeMappingEntry 5 } Pseudo Wire (PW) Over MPLS June 2003 Management Information Base pwVcMplsTeMappingVcIndex OBJECT-TYPE SYNTAX PwVcIndexType MAX-ACCESS read-only STATUS current DESCRIPTION "The value that represent the VC in the pwVcTable." ::= { pwVcMplsTeMappingEntry 6 } -- End of TE MPLS Tunnel to VC Mapping Table -- Notifications - PW over MPLS - FFS -- End of notifications. -- conformance information -- Note: Conformance at the object access and values level is -- still FFS, therefore current conformance is defined at the -- object existence level only. pwVcMplsGroups OBJECT IDENTIFIER ::= { pwVcMplsConformance 1 } pwVcMplsCompliances OBJECT IDENTIFIER ::= { pwVcMplsConformance 2 } pwMplsModuleCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for agent that support PW over MPLS PSN operation." MODULE -- this module MANDATORY-GROUPS { pwVcMplsGroup, pwVcMplsOutboundGroup, pwVcMplsMappingGroup } GROUP pwVcMplsInboundGroup DESCRIPTION "This group is mandatory for those PE that support PW over MPLS PSN." ::= { pwVcMplsCompliances 1 } -- Units of conformance. pwVcMplsGroup OBJECT-GROUP OBJECTS { pwVcMplsMplsType, pwVcMplsExpBitsMode, pwVcMplsExpBits, pwVcMplsTtl, Pseudo Wire (PW) Over MPLS June 2003 Management Information Base pwVcMplsLocalLdpID, pwVcMplsLocalLdpEntityID, pwVcMplsPeerLdpID, pwVcMplsStorageType } STATUS current DESCRIPTION "Collection of objects needed for PW VC over MPLS PSN configuration." ::= { pwVcMplsGroups 1 } pwVcMplsOutboundGroup OBJECT-GROUP OBJECTS { pwVcMplsOutboundIndexNext, pwVcMplsOutboundLsrXcIndex, pwVcMplsOutboundTunnelIndex, pwVcMplsOutboundTunnelInstance, pwVcMplsOutboundTunnelLclLSR, pwVcMplsOutboundTunnelPeerLSR, pwVcMplsOutboundIfIndex, pwVcMplsOutboundRowStatus, pwVcMplsOutboundStorageType } STATUS current DESCRIPTION "Collection of objects needed for outbound association of VC and MPLS tunnel." ::= { pwVcMplsGroups 2 } pwVcMplsInboundGroup OBJECT-GROUP OBJECTS { pwVcMplsInboundIndexNext, pwVcMplsInboundLsrXcIndex, pwVcMplsInboundTunnelIndex, pwVcMplsInboundTunnelInstance, pwVcMplsInboundTunnelLclLSR, pwVcMplsInboundTunnelPeerLSR, pwVcMplsInboundIfIndex, pwVcMplsInboundRowStatus, pwVcMplsInboundStorageType } STATUS current DESCRIPTION "Collection of objects needed for inbound association of VC and MPLS tunnel. This group is mandatory if strict mode is implemented." Pseudo Wire (PW) Over MPLS June 2003 Management Information Base ::= { pwVcMplsGroups 3 } pwVcMplsMappingGroup OBJECT-GROUP OBJECTS { pwVcMplsNonTeMappingVcIndex, pwVcMplsTeMappingVcIndex } STATUS current DESCRIPTION "Collection of objects used for mapping of tunnels and VC labels to VC index." ::= { pwVcMplsGroups 4 } END -- of PW-MPLS-MIB 8 Security Considerations There are a number of management objects defined in this MIB that have a MAX-ACCESS clause of read-write and/or read-create. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations. SNMPv1 by itself is not a secure environment. Even if the network itself is secure (for example by using IPSec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB. It is recommended that the implementers consider the security features as provided by the SNMPv3 framework. Specifically, the use of the User-based Security Model RFC 2574 [RFC2574] and the View-based Access Control Model RFC 2575 [RFC2575] is recommended. It is then a customer/user responsibility to ensure that the SNMP entity giving access to an instance of this MIB, is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them. The use of strict inbound VC lookup the security problems related to a global VC space in a node is greatly reduced, by limiting the accepted packets to a small set of controlled tunnels. 9 References [MPLSArch] Rosen, E., Viswanathan, A., and R. Callon, "Multiprotocol Label Switching Architecture", RFC 3031, Jan 2001. Pseudo Wire (PW) Over MPLS June 2003 Management Information Base [CEP] Malis, A., et al, "SONET/SDH Circuit Emulation over Packet (CEP)", Internet Draft , November 2001. [TRANS] Martini et al, "Transport of Layer 2 Frames Over MPLS" , April 2002. [ENCAP] Martini et al, "Encapsulation Methods for Transport of Layer 2 Frames Over MPLS", , November 2001. [FRMWK] Pate et al, "Framework for Pseudo Wire Emulation Edge- to-Edge (PWE3)", , February 2002. [PWREQ] Xiao et al, "Requirements for Pseudo Wire Emulation Edge-to-Edge (PWE3)", , November 2001. [PW-MIB] Zelig et al, "Pseudo Wire (PW) Management Information Base", , June 2003. [CEPMIB] Danenberg et al, "SONET/SDH Circuit Emulation Service Over MPLS (CEP) Management Information Base Using SMIv2", , June 2003. [LSRMIB] Srinivasan, C., Viswanathan, A., and Nadeau, T. "MPLS Label Switch Router Management Information Base Using SMIv2", draft-ietf-mpls-lsr-mib-08.txt, January 2002. [PWTC] Nadeau, T., et al, "Definitions for Textual Conventions and OBJECT-IDENTITIES for Pseudo-Wires Management", , June 2003. [TEMIB] Srinivasan, C., Viswanathan, A., and Nadeau, T. "MPLS Traffic Engineering Management Information Base Using SMIv2", , January 2002. [LDPMIB] J. Cucchiara et al, "Definitions of Managed Objects for the Multiprotocol Label Switching, Label Distribution Protocol (LDP), , August 2001. [LblStk] Rosen, E., Rekhter, Y., Tappan, D., Farinacci, D., Federokow, G., Li, T., and A. Conta, "MPLS Label Stack Encoding", RFC 3032, January 2001. Pseudo Wire (PW) Over MPLS June 2003 Management Information Base [Assigned] Reynolds, J., and J. Postel, "Assigned Numbers", RFC 1700, October 1994. See also: http://www.isi.edu/in- notes/iana/assignments/smi-numbers [IANAFamily] Internet Assigned Numbers Authority (IANA), ADDRESS FAMILY NUMBERS,(http://www.isi.edu/in- notes/iana/assignements/address-family-numbers), for MIB see: ftp://ftp.isi.edu/mib/ianaaddressfamilynumbers.mib [IFMIB] McCloghrie, K., and F. Kastenholtz, "The Interfaces Group MIB using SMIv2", RFC 2863, January 2000. [BCP14] Bradner, S., "Key words for use in RFCs to Indicate requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2571] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing SNMP Management Frameworks", RFC 2571, April 1999. [RFC1155] Rose, M., and K. McCloghrie, "Structure and Identification of Management Information for TCP/IP- based Internets", STD 16, RFC 1155, May 1990. [RFC1212] Rose, M., and K. McCloghrie, "Concise MIB Definitions", STD 16, RFC 1212, March 1991. [RFC1215] M. Rose, "A Convention for Defining Traps for use with the SNMP", RFC 1215, March 1991. [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J, Rose, M., and S. Waldbusser, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J, Rose, M., and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J, Rose, M., and S. Waldbusser, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. [RFC1157] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple Network Management Protocol", STD 15, RFC 1157, May 1990. [RFC1901] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Introduction to Community-based SNMPv2", RFC 1901, January 1996. Pseudo Wire (PW) Over MPLS June 2003 Management Information Base [RFC1906] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Transport Mappings for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1906, January 1996. [RFC2572] Case, J., Harrington D., Presuhn R., and B. Wijnen, "Message Processing and Dispatching for the Simple Network Management Protocol (SNMP)", RFC 2572, April 1999. [RFC2574] Blumenthal, U., and B. Wijnen, "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)", RFC 2574, April 1999. [RFC1905] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Protocol Operations for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1905, January 1996. [RFC2573] Levi, D., Meyer, P., and B. Stewart, "SNMPv3 Applications", RFC 2573, April 1999. [RFC2575] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)", RFC 2575, April 1999. [RFC2570] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction to Version 3 of the Internet-standard Network Management Framework", RFC 2570, April 1999. 10 Author's Addresses David Zelig Corrigent Systems 126, Yigal Alon st. Tel Aviv, ISRAEL Phone: +972-3-6945273 Email: davidz@corrigent.com Thomas D. Nadeau Cisco Systems, Inc. 250 Apollo Drive Chelmsford, MA 01824 Email: tnadeau@cisco.com Dave Danenberg Litchfield Communications, Inc. 76 Westbury Park Rd Princeton Building East Watertown, CT 06795 Email: dave_danenberg@litchfieldcomm.com Pseudo Wire (PW) Over MPLS June 2003 Management Information Base Andrew G. Malis Vivace Networks, Inc. 2730 Orchard Parkway San Jose, CA 95134 Email: Andy.Malis@vivacenetworks.com Sharon Mantin AxONLink (Israel) Ltd 9 Bareket St. Petah Tikva 49517, Israel Phone: +972-3-9263972 Email: sharon.mantin@axonlink.com 11 Full Copyright Statement Copyright (C) The Internet Society (2000). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.