-- extracted from draft-ietf-rmonmib-raqmon-mib-03.txt -- at Tue Dec 2 06:16:04 2003 RAQMON-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF Integer32, Unsigned32, Gauge32, Counter32, OBJECT-TYPE, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI rmon FROM RMON-MIB RowStatus, TruthValue, DateAndTime FROM SNMPv2-TC Utf8String FROM SYSAPPL-MIB Dscp FROM DIFFSERV-DSCP-TC; raqmon MODULE-IDENTITY LAST-UPDATED "200311260000Z" -- November 26, 2003 ORGANIZATION "IETF RMON MIB Working Group" CONTACT-INFO " WG Charter: http://www.ietf.org/html.charters/rmonmib-charter.html Mailing lists: General Discussion: rmonmib@ietf.org To Subscribe: rmonmib-requests@ietf.org In Body: subscribe your_email_address Chair: Andy Bierman Cisco Inc. Email: abierman@cisco.com Editor: Dan Romascanu Avaya Email: dromasca@avaya.com " DESCRIPTION "Real-Time Application QoS Monitoring MIB. Copyright (c) The Internet Society (2003). This version of this MIB module is part of RFC yyyy; See the RFC itself for full legal notices." -- RFC Ed.: replace yyyy with the actual RFC -- number & remove this notice. REVISION "200311260000Z" DESCRIPTION "Initial version, published as RFC yyyy." -- RFC-Editor assigns yyyy ::= { rmon 31 } -- -- Textual conventions -- -- -- Node definitions -- raqmonEvents OBJECT IDENTIFIER ::= { raqmon 0 } raqmonSessionAlarm NOTIFICATION-TYPE OBJECTS { raqmonParticipantAddr, raqmonParticipantName, raqmonParticipantPeerAddr, raqmonQosRTT, raqmonQosJitter, raqmonQosLostPackets, raqmonQosRcvdPackets } STATUS current DESCRIPTION "A notification generated by an entry in the raqmonSessionExceptionTable." ::= { raqmonEvents 1 } raqmonMIBObjects OBJECT IDENTIFIER ::= { raqmon 1 } raqmonSession OBJECT IDENTIFIER ::= { raqmonMIBObjects 1 } raqmonParticipantTable OBJECT-TYPE SYNTAX SEQUENCE OF RaqmonParticipantEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about participants in sessions. Contains both active and closed (terminated) sessions. " ::= { raqmonSession 1 } raqmonParticipantEntry OBJECT-TYPE SYNTAX RaqmonParticipantEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information from a single session participant. Rows are removed for inactive sessions when implementation specific age or space limits are reached. " INDEX { raqmonParticipantStartDate, raqmonParticipantIndex } ::= { raqmonParticipantTable 1 } RaqmonParticipantEntry ::= SEQUENCE { raqmonParticipantStartDate DateAndTime, raqmonParticipantIndex Integer32, raqmonParticipantReportCaps BITS, raqmonParticipantAddr IpAddress, raqmonParticipantSendPort Unsigned32, raqmonParticipantRecvPort Unsigned32, raqmonParticipantSetupDelay Unsigned32, raqmonParticipantName Utf8String, raqmonParticipantTool Utf8String, raqmonParticipantQosCount Unsigned32, raqmonParticipantEndDate DateAndTime, raqmonParticipantRcvdPT Unsigned32, raqmonParticipantSentPT Unsigned32, raqmonParticipantActive TruthValue, raqmonParticipantPeerIndex OCTET STRING, raqmonParticipantPeerAddr IpAddress, raqmonParticipantSrcLayer2 Unsigned32, raqmonParticipantDestLayer2 Unsigned32, raqmonParticipantSrcLayer3 Dscp, raqmonParticipantDestLayer3 Dscp, raqmonParticipantCPUMean Unsigned32, raqmonParticipantCPUMin Unsigned32, raqmonParticipantCPUMax Unsigned32, raqmonParticipantMemoryMean Unsigned32, raqmonParticipantMemoryMin Unsigned32, raqmonParticipantMemoryMax Unsigned32, raqmonParticipantRTTMean Gauge32, raqmonParticipantRTTMin Gauge32, raqmonParticipantRTTMax Gauge32, raqmonParticipantJitterType INTEGER, raqmonParticipantJitterMean Gauge32, raqmonParticipantJitterMin Gauge32, raqmonParticipantJitterMax Gauge32, raqmonParticipantOWDMean Gauge32, raqmonParticipantOWDMin Gauge32, raqmonParticipantOWDMax Gauge32, raqmonParticipantPackets Counter32, raqmonParticipantLostPackets Counter32 } raqmonParticipantStartDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS not-accessible STATUS current DESCRIPTION "The date and time of this entry. It will be the date and time of the first report received." ::= { raqmonParticipantEntry 1 } raqmonParticipantIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the conceptual row which is for SNMP purposes only and has no relation to any protocol value. There is no requirement that these rows are created or maintained sequentially. The index will be unique for a particular date and time." ::= { raqmonParticipantEntry 2 } raqmonParticipantReportCaps OBJECT-TYPE SYNTAX BITS { raqmonPartReportSendPort(0), raqmonPartReportRecvPort(1), raqmonPartReportSetupDelay(2), raqmonPartReportName(3), raqmonPartReportTool(4), raqmonPartReportRcvdPT(5), raqmonPartReportSentPT(6), raqmonPartReportSrcLayer2(7), raqmonPartReportDestLayer2(8), raqmonPartReportSrcLayer3(9), raqmonPartReportDestLayer3(10), raqmonPartReportCPU(11), raqmonPartReportRTT(12), raqmonPartReportJitter(13), raqmonPartReportOWD(14), raqmonPartReportLoss(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Report capabilities of the participant, as perceived by the Collector. If the collector receives information on the respective metrics in RAQMON PDUs from the participant RDS, the corresponding bit will be set." ::= { raqmonParticipantEntry 3 } raqmonParticipantAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP Address of the participant for this session." ::= { raqmonParticipantEntry 4 } raqmonParticipantSendPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Port from which session data is sent." REFERENCE "Section 5.5 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 5 } raqmonParticipantRecvPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Port on which session data is received." REFERENCE "Section 5.6 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 6 } raqmonParticipantSetupDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Session setup time in milliseconds." REFERENCE "Section 5.8 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 7 } raqmonParticipantName OBJECT-TYPE SYNTAX Utf8String MAX-ACCESS read-only STATUS current DESCRIPTION "The data source name for the participant." ::= { raqmonParticipantEntry 8 } raqmonParticipantTool OBJECT-TYPE SYNTAX Utf8String MAX-ACCESS read-only STATUS current DESCRIPTION "A string giving the name and possibly version of the application generating the stream, e.g., videotool 1.2. This information may be useful for debugging purposes and is similar to the Mailer or Mail- System-Version SMTP headers. The tool value is expected to remain constant for the duration of the session." ::= { raqmonParticipantEntry 9 } raqmonParticipantQosCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of entries in the QOS history table for this participant and session." ::= { raqmonParticipantEntry 10 } raqmonParticipantEndDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time of the last report received." ::= { raqmonParticipantEntry 11 } raqmonParticipantRcvdPT OBJECT-TYPE SYNTAX Unsigned32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "Payload type of received packets." REFERENCE "RFC 1890, Section 5.21 of the [RAQMON FRAMEWORK] " ::= { raqmonParticipantEntry 12 } raqmonParticipantSentPT OBJECT-TYPE SYNTAX Unsigned32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "Payload type of sent packets." REFERENCE "RFC 1890, Section 5.20 of the [RAQMON FRAMEWORK] " ::= { raqmonParticipantEntry 13 } raqmonParticipantActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Value 'true' ndicates that the session for this participant is active (open). Value 'false' indicates that the session is closed (terminated). " ::= { raqmonParticipantEntry 14 } raqmonParticipantPeerIndex OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0 | 11)) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the corresponding entry in this table for the other peer participant. If there is no such entry then the value will be a zero length string. Otherwise it will be a string of length 11 consisting of the raqmonParticipantStartDate octet string appended with an octet string of length 4 containing raqmonParticipantIndex (most significant octet first). Note, the entry may no longer exist even if the index is not zero length since the entry may have been deleted due to implementation defined limits being exceeded. " ::= { raqmonParticipantEntry 15 } raqmonParticipantPeerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP address of peer endpoint." ::= { raqmonParticipantEntry 16 } raqmonParticipantSrcLayer2 OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Source Layer 2 priority" REFERENCE "Section 5.22 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 17 } raqmonParticipantDestLayer2 OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Destination Layer 2 priority." REFERENCE "Section 5.24 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 18 } raqmonParticipantSrcLayer3 OBJECT-TYPE SYNTAX Dscp MAX-ACCESS read-only STATUS current DESCRIPTION "Source Layer 3 DSCP value" REFERENCE "Section 5.23 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 19 } raqmonParticipantDestLayer3 OBJECT-TYPE SYNTAX Dscp MAX-ACCESS read-only STATUS current DESCRIPTION "Destination Layer 3 DSCP value" REFERENCE "Section 5.25 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 20 } raqmonParticipantCPUMean OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Mean CPU utilization as a percentage." REFERENCE "Section 5.26 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 21 } raqmonParticipantCPUMin OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum CPU utilization as a percentage." REFERENCE "Section 5.26 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 22 } raqmonParticipantCPUMax OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum CPU utilization as a percentage." REFERENCE "Section 5.26 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 23 } raqmonParticipantMemoryMean OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Mean memory utilization as a percentage." REFERENCE "Section 5.27 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 24 } raqmonParticipantMemoryMin OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum memory utilization as a percentage." REFERENCE "Section 5.27 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 25 } raqmonParticipantMemoryMax OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum memory utilization as a percentage." REFERENCE "Section 5.27 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 26 } raqmonParticipantRTTMean OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Mean round trip time (RTT) over the entire session." REFERENCE "Section 5.10 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 27 } raqmonParticipantRTTMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum round trip time (RTT) over the entire session." REFERENCE "Section 5.10 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 28 } raqmonParticipantRTTMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum round trip time (RTT) over the entire session." REFERENCE "Section 5.10 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 29 } raqmonParticipantJitterType OBJECT-TYPE SYNTAX INTEGER { interArrival(1), absolute(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Jitter type used in reporting jitter values." REFERENCE "Section 5.13 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 30 } raqmonParticipantJitterMean OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Mean jitter over the entire session." REFERENCE "Section 5.13 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 31 } raqmonParticipantJitterMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum jitter over the entire session." REFERENCE "Section 5.13 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 32 } raqmonParticipantJitterMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximim jitter over the entire session." REFERENCE "Section 5.13 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 33 } raqmonParticipantOWDMean OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Mean one way delay (OWD) over the entire session." REFERENCE "Section 5.12 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 34 } raqmonParticipantOWDMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum one way delay (OWD) over the entire session." REFERENCE "Section 5.12 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 35 } raqmonParticipantOWDMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum one way delay (OWD) over the entire session." REFERENCE "Section 5.12 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 36 } raqmonParticipantPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of packets received for the entire session." REFERENCE "Section 5.14 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 37 } raqmonParticipantLostPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of packets lost by this receiver for the entire session." REFERENCE "Section 5.18 of the [RAQMON FRAMEWORK]" ::= { raqmonParticipantEntry 38 } raqmonQosTable OBJECT-TYPE SYNTAX SEQUENCE OF RaqmonQosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of historical information about quality of service data during sessions. " ::= { raqmonSession 2 } raqmonQosEntry OBJECT-TYPE SYNTAX RaqmonQosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information from a single RAQMON packet. Rows are removed for inactive sessions when implementation specific time or space limits are reached. " INDEX { raqmonParticipantStartDate, raqmonParticipantIndex, raqmonQosTime } ::= { raqmonQosTable 1 } RaqmonQosEntry ::= SEQUENCE { raqmonQosTime Unsigned32, raqmonQosRTT Gauge32, raqmonQosJitter Gauge32, raqmonQosRcvdPackets Integer32, raqmonQosRcvdOctets Integer32, raqmonQosSentPackets Integer32, raqmonQosSentOctets Integer32, raqmonQosLostPackets Integer32, raqmonQosSessionStatus Utf8String } raqmonQosTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Time of this entry measured from the start of the corresponding participant session (measured in seconds)." ::= { raqmonQosEntry 1 } raqmonQosRTT OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The round trip time. Will contain the previous value if there was no report for this time (or 2^32 - 1 if value never reported). " REFERENCE "Section 5.10 of the [RAQMON FRAMEWORK]" ::= { raqmonQosEntry 2 } raqmonQosJitter OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of delay variation as observed by this receiver. Will contain the previous value if there was no report for this time (or 2^32 - 1 if value never reported). " REFERENCE "Section 5.13 of the [RAQMON FRAMEWORK]" ::= { raqmonQosEntry 3 } raqmonQosRcvdPackets OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of packets received by this receiver since the last entry containing a value for this field. This is not a cumulative value since the start of the session. Set to -1 if value not reported for this time. " REFERENCE "Section 5.14 of the [RAQMON FRAMEWORK]" ::= { raqmonQosEntry 4 } raqmonQosRcvdOctets OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of octets received by this receiver since the last entry containing a value for this field. This is not a cumulative value since the start of the session. Set to -1 if value not reported for this time. " REFERENCE "Section 5.16 of the [RAQMON FRAMEWORK]" ::= { raqmonQosEntry 5 } raqmonQosSentPackets OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of packets sent since the last entry containing a value for this field. This is not a cumulative value since the start of the session. Set to -1 if value not reported for this time. " REFERENCE "Section 5.15 of the [RAQMON FRAMEWORK]" ::= { raqmonQosEntry 6 } raqmonQosSentOctets OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of octets sent since the last entry containing a value for this field. This is not a cumulative value since the start of the session. Set to -1 if value not reported for this time. " REFERENCE "Section 5.17 of the [RAQMON FRAMEWORK]" ::= { raqmonQosEntry 7 } raqmonQosLostPackets OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of packets lost as observed by this receiver since the last entry containing a value for this field. Set to -1 if value not reported for this time." REFERENCE "Section 5.18 of the [RAQMON FRAMEWORK]" ::= { raqmonQosEntry 8 } raqmonQosSessionStatus OBJECT-TYPE SYNTAX Utf8String MAX-ACCESS read-only STATUS current DESCRIPTION "The session status. Will contain the previous value if there was no report for this time (or if no value was ever reported)." ::= { raqmonQosEntry 9 } raqmonParticipantAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF RaqmonParticipantAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Maps raqmonParticipantAddr to the index of the raqmonParticipantTable. This table allows management applications to find entries sorted by raqmonParticipantAddr rather than raqmonParticipantStartDate." ::= { raqmonSession 3 } raqmonParticipantAddrEntry OBJECT-TYPE SYNTAX RaqmonParticipantAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to exactly one entry in the raqmonParticipantEntry - the entry containing the index pair rraqmonParticipantStartDate, raqmonParticipantIndex." INDEX { raqmonParticipantAddr, raqmonParticipantStartDate, raqmonParticipantIndex } ::= { raqmonParticipantAddrTable 1 } RaqmonParticipantAddrEntry ::= SEQUENCE { raqmonParticipantAddrEndDate DateAndTime } raqmonParticipantAddrEndDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of raqmonParticipantEndDate for the corresponding raqmonParticipantEntry." ::= { raqmonParticipantAddrEntry 1 } raqmonException OBJECT IDENTIFIER ::= { raqmonMIBObjects 2 } raqmonSessionExceptionTable OBJECT-TYPE SYNTAX SEQUENCE OF RaqmonSessionExceptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table creates filters so that a management station can get immediate notification of a session that has had poor quality of service." ::= { raqmonException 2 } raqmonSessionExceptionEntry OBJECT-TYPE SYNTAX RaqmonSessionExceptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the raqmonSessionExceptionTable." INDEX { raqmonSessionExceptionIndex } ::= { raqmonSessionExceptionTable 1 } RaqmonSessionExceptionEntry ::= SEQUENCE { raqmonSessionExceptionIndex Unsigned32, raqmonSessionExceptionJitterThreshold Unsigned32, raqmonSessionExceptionRttThreshold Unsigned32, raqmonSessionExceptionLostPacketsThreshold Unsigned32, raqmonSessionExceptionRowStatus RowStatus } raqmonSessionExceptionIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies an entry in the raqmonSessionExceptionTable." ::= { raqmonSessionExceptionEntry 2 } raqmonSessionExceptionJitterThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Threshold for jitter in units of milliseconds. The value during a session must be greater than or equal to this value for an exception to be created." ::= { raqmonSessionExceptionEntry 3 } raqmonSessionExceptionRttThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Threshold for round trip time in units of milliseconds. The value during a session must be greater than or equal to this value for an exception to be created." ::= { raqmonSessionExceptionEntry 4 } raqmonSessionExceptionLostPacketsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "Threshold for lost packets in units of tenth of a percent. The value during a session must be greater than or equal to this value for an exception to be created." ::= { raqmonSessionExceptionEntry 5 } raqmonSessionExceptionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Value of 'active' when exceptions are being monitored by the system. A newly-created conceptual row must have the all read-create objects initialized before becoming 'active'. A conceptual row that is in the 'notReady' or 'notInService' state MAY be removed after 5 minutes." ::= { raqmonSessionExceptionEntry 7 } raqmonConfig OBJECT IDENTIFIER ::= { raqmonMIBObjects 3 } raqmonConfigPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port to listen on for RAQMON reports, running on other transport protocols than SNMP. If the RAQMON PDU transport protocol is SNMP, The standard port 162 is always used" ::= { raqmonConfig 1 } raqmonConfigPDUTransport OBJECT-TYPE SYNTAX BITS { other(0), rtcp(1), snmp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The PDU transport used by this collector. If other(0) is set, the collector supports a transport other than RTCP or SNMP If rtcp(1) is set, the collector supports RTCP transport If snmp(2) is set, the collector supports SNMP transport." ::= { raqmonConfig 2 } raqmonConfigRaqmonPDUs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of RAQMON PDUs received by the Collector." ::= { raqmonConfig 3 } raqmonConformance OBJECT IDENTIFIER ::= { raqmon 2 } raqmonCompliances OBJECT IDENTIFIER ::= { raqmonConformance 1 } raqmonGroups OBJECT IDENTIFIER ::= { raqmonConformance 2 } raqmonCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for conformance to the RAQMON MIB." MODULE -- this module MANDATORY-GROUPS { raqmonCollectorGroup, raqmonCollectorNotificationsGroup } ::= { raqmonCompliances 1 } raqmonCollectorGroup OBJECT-GROUP OBJECTS { raqmonParticipantReportCaps, raqmonParticipantAddr, raqmonParticipantSendPort, raqmonParticipantRecvPort, raqmonParticipantSetupDelay, raqmonParticipantName, raqmonParticipantTool, raqmonParticipantQosCount, raqmonParticipantEndDate, raqmonParticipantRcvdPT, raqmonParticipantSentPT, raqmonParticipantActive, raqmonParticipantPeerIndex, raqmonParticipantPeerAddr, raqmonParticipantSrcLayer2, raqmonParticipantDestLayer2, raqmonParticipantSrcLayer3, raqmonParticipantDestLayer3, raqmonParticipantCPUMean, raqmonParticipantCPUMin, raqmonParticipantCPUMax, raqmonParticipantMemoryMean, raqmonParticipantMemoryMin, raqmonParticipantMemoryMax, raqmonParticipantRTTMean, raqmonParticipantRTTMin, raqmonParticipantRTTMax, raqmonParticipantJitterType, raqmonParticipantJitterMean, raqmonParticipantJitterMin, raqmonParticipantJitterMax, raqmonParticipantOWDMean, raqmonParticipantOWDMin, raqmonParticipantOWDMax, raqmonParticipantPackets, raqmonParticipantLostPackets, raqmonQosRTT, raqmonQosJitter, raqmonQosRcvdPackets, raqmonQosRcvdOctets, raqmonQosSentPackets, raqmonQosSentOctets, raqmonQosLostPackets, raqmonQosSessionStatus, raqmonParticipantAddrEndDate, raqmonConfigPort, raqmonSessionExceptionJitterThreshold, raqmonSessionExceptionRttThreshold, raqmonSessionExceptionLostPacketsThreshold, raqmonSessionExceptionRowStatus, raqmonConfigPDUTransport, raqmonConfigRaqmonPDUs } STATUS current DESCRIPTION "Objects used in RAQMON by a Collector" ::= { raqmonGroups 1 } raqmonCollectorNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { raqmonSessionAlarm } STATUS current DESCRIPTION "Notifications emitted by a RAQMON collector." ::= { raqmonGroups 2 } END -- -- This document and translations of it may be copied and furnished to -- others, and derivative works that comment on or otherwise explain it -- or assist in its implementation may be prepared, copied, published -- and distributed, in whole or in part, without restriction of any -- kind, provided that the above copyright notice and this paragraph are -- included on all such copies and derivative works. However, this -- document itself may not be modified in any way, such as by removing -- the copyright notice or references to the Internet Society or other -- Internet organizations, except as needed for the purpose of -- developing Internet standards in which case the procedures for -- copyrights defined in the Internet Standards process must be -- followed, or as required to translate it into languages other than -- English. -- -- The limited permissions granted above are perpetual and will not be -- revoked by the Internet Society or its successors or assigns. -- -- This document and the information contained herein is provided on an -- "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING -- TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING -- BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION -- HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF -- MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -- -- B. Log of Changes -- -- (This section will be removed prior to publication as RFC) -- -- B1. Changes in draft-siddiqui-rmonmib-raqmon-mib-02.txt -- -- - changed OID of raqmonSessionAlarm -- - clarifications in DESCRIPTION clauses -- - changed raqmonParticpantActive SYNTAX to TruthValue -- - change range of raqmonParticipantSrcLayer2 and -- raqmonParticipantDestLayer2 to (0..7) -- - changed raqmonParticipantSrcLayer3 and -- raqmonParticipantDestLayer3 to Dscp -- - changed counters SYNTAX to Counter32 -- - added raqmonConfigPDUTransport and raqmonConfigRaqmonPDUs -- - added raqmonPDUBasicPDU and raqmonSNMPTransportNotofication -- - changed raqmonConformace to reflect the different conformace requirements for -- collectors and RAQMON devices -- -- B2. Changes in draft-ietf-rmonmib-raqmon-mib-00.txt -- -- - changed MAX-ACCESS clause of read-write objects in raqmonParticpantTable to read-only -- - changed syntax of raqmonConfigPDUTransport to BITS -- - changed document boilerplate -- - divided references in normative and informative -- B3. Changes in draft-ietf-rmonmib-raqmon-mib-01.txt -- -- - took out RAQMON PDU definition, now part of [RAQMON-PDU} -- - added one way delay objects -- - modified SYNTAX of INTEGER objects, in accordance with MIB guidelines -- - re-wrote Security Considerations Section -- -- B4. Changes in draft-ietf-rmonmib-raqmon-mib-02.txt -- -- - introduced REFERENCE clauses, synchronized with RAQMON Framework -- - eliminated duplicate text and diagrams relative to the other RAQMON documents -- - fixed MAX-ACCESS of objects in raqmonSessionExceptionTable to read-create -- -- B5. Changes in draft-ietf-rmonmib-raqmon-mib-03.txt -- -- - introduced raqmonParticpantJitterType object -- - changed raqmonQoSRsvpStatus to raqmonQoSSessionStatus -- - IMPORT DateAndTime from SMIv2-TC -- - Fixed MIB root, in the RMON registry -- - re-edited copyright note, according to MIB review document -- - various spelling edits