-- extracted from draft-ietf-atommib-sonetaps-mib-00.txt -- at Thu Dec 9 07:06:58 1999 RBN-APS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, TimeTicks, OBJECT-IDENTITY FROM SNMPv2-SMI rbnMgmt FROM RBN-SMI; rbnApsMIB MODULE-IDENTITY LAST-UPDATED "9912072300Z" ORGANIZATION "RedBack Networks, Inc." CONTACT-INFO " RedBack Networks, Inc. Postal: 1389 Moffett Park Drive Sunnyvale, CA 94089-1134 USA Phone: +1 408 548 3500 Fax: +1 408 548 3599 E-mail: mib-info@RedBackNetworks.com" DESCRIPTION "This management information module supports the configuration and management of SONET linear APS groups. The definitions and descriptions used in this mib have been derived from GR-253-CORE Revision 2, January 1999, section 5.3. Ring APS groups are not currently supported by this mib. The mib contains six tables. The apsMapTable contains entries for each SONET LTE interface available on the system. The table serves two purposes. It can be used to locate SONET LTE interfaces that are not currently included in APS groups. It also provides a mapping from InterfaceIndex to group name and channel number for those SONET LTE interfaces that are included in APS groups. Entries in apsMapTable cannot be added or deleted through operations defined in this mib. However, an apsMapEntry may be added or deleted through other system mechanisms, such as hot swap. The apsChanConfigTable supports addition, modification and deletion of entries representing linear APS channels. Entries are indexed by a text group name and integer channel number. Each entry contains an InterfaceIndex value identifying the SONET LTE used for the channel and the priority of the channel. A side effect of row creation or deletion is creation or deletion of corresponding command and channel status entries, and the setting of map entry fields. Creation of 2-14 entries in this table with a common group name index and consecutive channel numbers beginning with zero is the first step in the creation and configuration of an APS group. It is not necessary to create channel numbers in order, however the resulting set of channels must begin with channel number 0 and must be consecutive. The apsConfigTable supports addition, modification and deletion of entries representing linear APS groups. Entries are indexed by a text group name. Each entry contains parameters that specify the configuration of a particular linear APS group. Entries are created in this table after a set of channels are created in the apsChanConfigTable. In order to successfully set an instance of apsConfigRowStatus to active the apsConfigEntry must contain valid values and all associated apsChanConfigEntry rows must be valid and produce a consecutive set of channels beginning with channel number 0. The apsCommandTable provides linear APS commands that support protection switching and the ability to modify APS operation. Commands may only be entered if the corresponding apsConfigRowStatus instance is set to active. Entries in this table are created as a side effect of row addition in the apsChanConfigTable. The apsChanStatusTable provides individual channel statistics. Entries in this table are created as a side effect of row addition in the apsChanConfigTable. The apsStatusTable provides group level statistics. Entries in this table are created as a side effect of row addition in apsConfigTable. An APS group is created and configured with the following sequence of events: CHANNEL CONFIGURATION Create an entry in the apsChanConfigTable Set the apsChanGroupName in an apsChanConfigEntry to a user-friendly text string which will serve as the APS group name. The string must not be equal to the apsConfigName of an existing apsConfigEntry with apsConfigRowStatus set to active, since a channel cannot be added to an active group. The string may be set equal to the apsConfigName of a row which is currently not set to active, or it may be set to a string which does not currently exist in any instance of apsConfigName. A channel number is entered in apsChanNumber. A channel priority is entered in apsChanPriority, if the intended architecture is 1:n. apsChanPriority is ignored if the architecture is 1+1. The InterfaceIndex value of a SONET LTE interface is entered in apsChanIfIndex. This step is repeated for all apsChanConfigEntry instances which are to be included in the APS group. ACTIVATING THE GROUP If the apsChanGroupName does not exist in an instance of apsConfigName, an apsConfigEntry is created with the apsChanGroupName value used as the index for the row. The apsConfigRowStatus value may be set to createAndGo. The apsGroupConfigEntry and apsChanConfigEntry instances with matching name fields will be checked for consistency. If any errors in the channel numbers, architecture or configuration are uncovered the apsConfigRowStatus set will return inconsistentValue, otherwise noError is returned. If the apsChanGroupName value used in channel configuration exists in a previously created, inactive apsConfigEntry instance, the apsConfigRowStatus value may be set to active. " REVISION "9912072300Z" DESCRIPTION "A draft version of the linear APS MIB." ::= { rbnMgmt 5 } rbnApsMIBNotifications OBJECT IDENTIFIER ::= { rbnApsMIB 0 } rbnApsMIBObjects OBJECT IDENTIFIER ::= { rbnApsMIB 1 } rbnApsMIBConformance OBJECT IDENTIFIER ::= { rbnApsMIB 2 } ApsK1K2 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This Textual Convention describes an object that stores a SONET K1 and K2 byte APS protocol field. K1 is located in the first octet, K2 is located in the second octet. Bits 1-4 of the K1 byte indicate a request. 1111 Lockout of Protection 1110 Forced Switch 1101 SF - High Priority 1100 SF - Low Priority 1011 SD - High Priority 1010 SD - Low Priority 1001 not used 1000 Manual Switch 0111 not used 0110 Wait-to-Restore 0101 not used 0100 Exercise 0011 not used 0010 Reverse Request 0001 Do Not Revert 0000 No Request Bits 5-8 of the K1 byte indicate the channel associated with the request defined in bits 1-4. 0000 is the Null channel 1-14 are working channels. 15 is the extra traffic channel Bits 1-4 of the K2 byte indicate a channel. The channel is defined with the same syntax as K1 Bits 5-8. Bit 5 of the K2 byte indicates the architecture. 0 if the architecture is 1+1 1 if the architecture is 1:n Bits 6-8 of the K2 byte indicates the mode. 000 - 011 are reserved for future use 100 indicates the mode is unidirectional 101 indicates the mode is bidirectional 110 RDI-L 111 AIS-L " REFERENCE "Bellcore (Telcordia Technologies) GR-253-CORE, Issue 2, Revision 2 (January 1999), 5.3.5." SYNTAX OCTET STRING (SIZE (2)) ApsSwitchCommand ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An APS switch command allows a user to perform protection switch actions. The Switch command values are: clear(1) Clears all of the switch commands listed below for the specified channel. lockoutOfProtection(2) Prevents any of the working channels from switching to the protection line. forcedSwitchWorkToProtect(3) Switches the specified working channel to the protection line. forcedSwitchProtectToWork(4) Switches the working channel back from the protection line to the working line. manualSwitchWorkToProtect(5) Switches the specified working channel to the protection line. manualSwitchProtectToWork(6) Switches the working channel back from the protection line to the working line. exercise(7) Exercises the protocol for a protection switch of the specified channel by issuing an Exercise request for that channel and checking the response on the APS channel. " SYNTAX INTEGER { clear(1), lockoutOfProtection(2), forcedSwitchWorkToProtect(3), forcedSwitchProtectToWork(4), manualSwitchWorkToProtect(5), manualSwitchProtectToWork(6), exercise(7) } ApsControlCommand ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An APS control command applies only to LTE that support the 1:n architecture and performs the following actions. The Control command values are: lockoutWorkingChannel(1) Prevents the specified working channel from switching to the protection line. clearLockoutWorkingChannel(2) Clears the lockout a working channel command for the channel specified. " SYNTAX INTEGER { lockoutWorkingChannel(1), clearLockoutWorkingChannel(2) } -- -- APS Configuration Table -- -- This table supports the addition, configuration and deletion of APS -- groups. -- apsConfig OBJECT IDENTIFIER ::= { rbnApsMIBObjects 1 } apsConfigGroups OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of APS groups." ::= { apsConfig 1 } apsConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ApsConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the APS groups that have been configured on the system." ::= { apsConfig 2 } apsConfigEntry OBJECT-TYPE SYNTAX ApsConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the apsConfigTable." INDEX { IMPLIED apsConfigName } ::= { apsConfigTable 1 } ApsConfigEntry ::= SEQUENCE { apsConfigName SnmpAdminString, apsConfigMode INTEGER, apsConfigSdBerThreshold Integer32, apsConfigSfBerThreshold Integer32, apsConfigWaitToRestore Integer32, apsConfigCreationTime TimeTicks, apsConfigRowStatus RowStatus } apsConfigName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A textual name for the APS group. " ::= { apsConfigEntry 1 } apsConfigMode OBJECT-TYPE SYNTAX BITS { onePlusOne(0), oneToN(1), revertive(2), bidirectional(3), extraTrafficAllowed(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The architecture and mode of the APS group. The values mean: onePlusOne The 1+1 architecture permanently bridges the working line to the protection line. oneToN The 1:n architecture allows one protection channel to protect up to n working channels. When a fault is detected on one of the n working channels that channel is bridged over the protection channel. Note: onePlusOne and oneToN are mutually exclusive. revertive When the condition that caused a switch to the protection line has been cleared the signal is switched back to the working line. If this bit is clear it indicates a non-revertive system which remains on the protection line until another switch request is received. bidirectional The bi-directional mode provides protection in both directions. If this bit is clear it indicates unidirectional mode which provides protection in one direction. The default for 1:n is bidirectional. The default for 1+1 is unidirectional. extraTrafficAllowed Extra traffic may be carried on the protection channel in a 1:n architecture if this flag is set. It may be necessary to disable this in order to interwork with other SONET network elements that don't support extra traffic. This object may not be modified if the associated apsConfigRowStatus object is equal to active(1)." DEFVAL { '1'H } ::= { apsConfigEntry 2 } apsConfigSdBerThreshold OBJECT-TYPE SYNTAX Integer32 (5..9) MAX-ACCESS read-create STATUS current DESCRIPTION "The Signal Degrade Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER). For example, a value of 5 indicates a BER threshold of 10^-5. This object may not be modified if the associated apsConfigRowStatus object is equal to active(1)." DEFVAL { 5 } ::= { apsConfigEntry 3 } apsConfigSfBerThreshold OBJECT-TYPE SYNTAX Integer32 (3..5) MAX-ACCESS read-create STATUS current DESCRIPTION "The Signal Failure Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER). For example, a value of 5 indicates a BER threshold of 10^-5. This object may not be modified if the associated apsConfigRowStatus object is equal to active(1)." DEFVAL { 3 } ::= { apsConfigEntry 4 } apsConfigWaitToRestore OBJECT-TYPE SYNTAX Integer32 (300..720) MAX-ACCESS read-create STATUS current DESCRIPTION "The Wait To Restore period in seconds. This field only applies if revertive switching is enabled, otherwise this value is ignored. After clearing of a condition that necessitated an automatic switch, the wait to restore period must elapse before reverting. This is intended to avoid rapid switch oscillations. This object may not be modified if the associated apsConfigRowStatus object is equal to active(1)." DEFVAL { 10 } ::= { apsConfigEntry 5 } apsConfigCreationTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the associated apsConfigRowStatus instance was set to active." ::= { apsConfigEntry 6 } apsConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this APS group entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Also, all associated apsChanConfigEntry rows must represent a set of consecutive channel numbers beginning with zero. If this object is set to destroy, all associated apsChanConfigEntry, apsCommandEntry and apsChanStatusEntry rows will be deleted. Also, The fields apsMapGroupName and apsMapChanNumber in apsMapEntry rows corresponding to the deleted channels will be set to a string of size 0 and -1 respectively. This object may be set to notInService. When set to notInService changes may be made to apsConfigMode, apsConfigSdBerThreshold, apsCOnfigSfBerThreshold, and apsConfigWaitToRestore. Also, rows may be added and deleted from apsChanConfigTable. " ::= { apsConfigEntry 7 } -- -- APS Status Table -- -- This table provides APS group statistics. -- apsStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ApsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides status information about APS groups that have been configured on the system." ::= { rbnApsMIBObjects 2 } apsStatusEntry OBJECT-TYPE SYNTAX ApsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the apsStatusTable." INDEX { IMPLIED apsConfigName} ::= { apsStatusTable 1 } ApsStatusEntry ::= SEQUENCE { apsStatusK1K2Rcv ApsK1K2, apsStatusK1K2Trans ApsK1K2, apsStatusCurrent BITS, apsStatusModeMismatches Counter32, apsStatusChannelMismatches Counter32, apsStatusPSBFs Counter32, apsStatusFEPLFs Counter32 } apsStatusK1K2Rcv OBJECT-TYPE SYNTAX ApsK1K2 MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the K1 and K2 bytes received on the protection channel." ::= { apsStatusEntry 1 } apsStatusK1K2Trans OBJECT-TYPE SYNTAX ApsK1K2 MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the K1 and K2 bytes transmitted on the protection channel." ::= { apsStatusEntry 2 } apsStatusCurrent OBJECT-TYPE SYNTAX BITS { modeMismatch(0), channelMismatch(1), psbf(2), feplf(3), extraTraffic(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current status of the APS group. modeMismatch Modes other than 1+1 unidirectional monitor protection line K2 bit 5, which indicates the architecture and K2 bits 6-8, which indicate if the mode is unidirectional or bidirectional. A conflict between the current local mode and the received K2 mode information constitutes a mode mismatch. channelMismatch This bit indicates a mismatch between the transmitted K1 channel and the received K2 channel has been detected. psbf This bit indicates a Protection Switch Byte Failure (PSBF) is in effect. This condition occurs when an invalid code or persistently unacceptable codes in the K1 byte are received. feplf Modes other than 1+1 unidirectional monitor the K1 byte for Far-End Protection-Line failures. A Far-End Protection-Line defect is declared based on receiving SF on the protection line. extraTraffic This bit indicates whether extra traffic is currently being accepted on the protection line. " ::= { apsStatusEntry 3 } apsStatusModeMismatches OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Mode Mismatch conditions." ::= { apsStatusEntry 4 } apsStatusChannelMismatches OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Channel Mismatch conditions." ::= { apsStatusEntry 5 } apsStatusPSBFs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Protection Switch Byte Failure conditions. This condition occurs when an invalid code or persistently unacceptable codes in the K1 byte are received." ::= { apsStatusEntry 6 } apsStatusFEPLFs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Far-End Protection-Line Failure conditions. This condition is declared based on receiving SF on the protection line in the K1 byte." ::= { apsStatusEntry 7 } -- -- APS Map Group -- -- Lists the SONET LTE interfaces that may be used to create APS groups. -- apsMap OBJECT IDENTIFIER ::= { rbnApsMIBObjects 3 } apsChanLTEs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of available SONET LTE interfaces that may be included in APS groups." ::= { apsMap 1 } apsMapTable OBJECT-TYPE SYNTAX SEQUENCE OF ApsMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the SONET LTE interfaces that may be included in APS groups. This is a list of all interfaces on the system with ifType sonet(39)." ::= { apsMap 2 } apsMapEntry OBJECT-TYPE SYNTAX ApsMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the apsMapTable." INDEX { apsMapIfIndex } ::= { apsMapTable 1 } ApsMapEntry ::= SEQUENCE { apsMapIfIndex InterfaceIndex, apsMapGroupName SnmpAdminString, apsMapChanNumber Integer32 } apsMapIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Interface Index assigned to a SONET LTE. This is an interface with ifType sonet(39)." ::= { apsMapEntry 1 } apsMapGroupName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual name for the APS group which this channel is included in. If the channel is not part of an APS group this value is set to a string of size 0. " ::= { apsMapEntry 2 } apsMapChanNumber OBJECT-TYPE SYNTAX Integer32 (-1..14) MAX-ACCESS read-only STATUS current DESCRIPTION "This field is set to a unique channel number within an APS group. The value 0 indicates the null channel. The values 1-14 define a working channel. If the SONET LTE is not part of an APS group this value is set to -1. " ::= { apsMapEntry 3 } -- -- APS Channel Configuration Table -- -- This table supports the addition, configuration and deletion of channels -- in APS groups. -- apsChanConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ApsChanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the APS channels that have been configured in APS groups." ::= { rbnApsMIBObjects 4 } apsChanConfigEntry OBJECT-TYPE SYNTAX ApsChanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the apsChanConfigTable." INDEX {apsChanGroupName, apsChanNumber} ::= { apsChanConfigTable 1 } ApsChanConfigEntry ::= SEQUENCE { apsChanGroupName SnmpAdminString, apsChanNumber Integer32, apsChanIfIndex InterfaceIndex, apsChanPriority INTEGER, apsChanRowStatus RowStatus } apsChanGroupName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A textual name for the APS group which this channel is included in." ::= { apsChanConfigEntry 1 } apsChanNumber OBJECT-TYPE SYNTAX Integer32 (0..14) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This field is set to a unique channel number within an APS group. The value 0 indicates the null channel. The values 1-14 define a working channel. This field must be assigned a unique number within the group." ::= { apsChanConfigEntry 2 } apsChanIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The Interface Index assigned to a SONET LTE. This is an interface with ifType sonet(39). This must not be set to the InterfaceIndex of a SONET LTE that is currently configured in an APS group. This cannot be set if the group specified by apsChanGroupName is currently active. " ::= { apsChanConfigEntry 3 } apsChanPriority OBJECT-TYPE SYNTAX INTEGER {low(1), high(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "The priority of the channel. This field deterimines whether high or low priority SD and SF codes are used in K1 requests. This field is only applicable if the channel is to be included in a group using the 1:n architecture. It is not applicable if the channel is to be included in a group using the 1+1 architecture, and is ignored in that case. " DEFVAL { 1 } ::= { apsChanConfigEntry 4 } apsChanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this APS channel entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. A row may not be created with an apsChanGroupName value equal to an apsConfigName value if the associated apsConfigRowStatus object is equal to active. However, if the apsConfigRowStatus object is equal to notInService, a row may be created. In other words, a channel may not be added to an active group. A row may be created with an apsChanGroupName value that is not equal to any existing instance of apsConfigName. This action is the initial step in adding a SONET LTE to a new APS group. An instance of apsConfigName equal to this instance of apsChanGroupName will subsequently be created. If this object is set to destroy, the associated instance of apsMapGroupName will be set to a string of size 0 and the apsMapChanNumber will be set to -1 The channel command and channel status entries will also be deleted by this action. apsChanNumber must be set to a unique channel number within the APS group. The value 0 indicates the null channel. The values 1-14 define a working channel. When an attempt is made to set the corresponding apsConfigRowStatus field to active the apsChanNumber values of all entries with equal apsChanGroupName fields must represent a set of consecutive integer values beginning with 0 and ending with n, where n is greater than or equal to 1 and less than or equal to 14. Otherwise the error inconsistentValue is returned to the apsConfigRowStatus set attempt. " ::= { apsChanConfigEntry 5 } -- -- APS Command Table -- -- This table provides the ability to initiate APS commands. -- apsCommandTable OBJECT-TYPE SYNTAX SEQUENCE OF ApsCommandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows commands to be sent to configured APS groups." ::= { rbnApsMIBObjects 5 } apsCommandEntry OBJECT-TYPE SYNTAX ApsCommandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the apsCommandTable." INDEX {apsChanGroupName, apsChanNumber} ::= { apsCommandTable 1 } ApsCommandEntry ::= SEQUENCE { apsCommandSwitch Integer32, apsCommandControl Integer32 } apsCommandSwitch OBJECT-TYPE SYNTAX ApsSwitchCommand MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the initiation of an APS switch command on the APS group and channel specified by the index values. When read this object returns the last command written or clear(1) if no command has been written to this channel since initialization. The return of the last command written does not imply that this command is currently in effect. This request may have been preempted by a higer priority local or remote request. In order to determine the current state of the APS group it is necessary to read the objects apsStatusK1K2Rcv and apsStatusK1K2Trans. The value lockoutOfProtection(2) should only be applied to the protection line channel since that switch command prevents any of the working channels from switching to the protection line. Following the same logic, forcedSwitchProtectToWork(4) and manualSwitchProtectToWork(6) should only be applied to the protection line channel. forcedSwitchWorkToProtect(3) and manualSwitchWorkToProtect(5) should only be applied to a working channel. " ::= { apsCommandEntry 1 } apsCommandControl OBJECT-TYPE SYNTAX ApsControlCommand MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the initiation of an APS control command on the APS group and channel specified by the index values. When read this object returns the last command written or clearLockoutWorkingChannel(2) if no command has been written to this channel since initialization. This command should not be applied to the protection line however, for simplicity the value clearLockoutWorkingChannel(2) can be returned if this object is queried with the protection line channel. " ::= { apsCommandEntry 2 } -- -- APS Channel Status Table -- -- This table provides APS channel statistics. -- apsChanStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ApsChanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains status information for all SONET LTE interfaces that are included in APS groups." ::= { rbnApsMIBObjects 6 } apsChanStatusEntry OBJECT-TYPE SYNTAX ApsChanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the apsChanStatusTable." INDEX {apsChanGroupName, apsChanNumber} ::= { apsChanStatusTable 1 } ApsChanStatusEntry ::= SEQUENCE { apsChanStatus BITS, apsChanSignalDegrades Counter32, apsChanSignalFailures Counter32, apsChanSwitchovers Counter32, apsChanLastSwitchover TimeTicks } apsChanStatus OBJECT-TYPE SYNTAX BITS { lockedOut(0), sd(1), sf(2), switched(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current state of the port. lockedOut This bit, when applied to a working channel, indicates that the channel is prevented from switching to the protection line. When applied to the null channel, this bit indicates that no working channel may switch to the protection line. sd A signal degrade condition is in effect. sf A signal failure condition is in effect. switched The switched bit is applied to a working channel if that channel is currently switched to the protection line. " ::= { apsChanStatusEntry 1 } apsChanSignalDegrades OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Signal Degrade conditions. This condition occurs when the line Bit Error Rate exceeds the currently configured threshold." ::= { apsChanStatusEntry 2 } apsChanSignalFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Signal Failure conditions that have been detected on the incoming signal. This condition occurs when a loss of signal, loss of frame, AIS-L or a Line bit error rate exceeding 10^-3 is detected on an incoming line." ::= { apsChanStatusEntry 3 } apsChanSwitchovers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this channel has switched to the protection line. When queried with index value apsChanNumber set to 0, which is the protection line, this object will return 0. " ::= { apsChanStatusEntry 4 } apsChanLastSwitchover OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this channel last completed a switch to the protection line. If this channel has never switched to the protection line, or this channel is the protection line, the value 0 will be returned." ::= { apsChanStatusEntry 5 } -- -- APS TRAPS -- apsTrapSwitchover NOTIFICATION-TYPE OBJECTS { apsChanSwitchovers, apsChanStatus } STATUS current DESCRIPTION "An apsTrapSwitchover notification is sent when the value of an instance of apsChanSwitchovers increments." ::= { rbnApsMIBNotifications 1 } apsTrapModeMismatch NOTIFICATION-TYPE OBJECTS { apsStatusModeMismatches, apsStatusCurrent } STATUS current DESCRIPTION "An apsTrapModeMismatch notification is sent when the value of an instance of apsStatusModeMismatches increments." ::= { rbnApsMIBNotifications 2 } apsTrapChannelMismatch NOTIFICATION-TYPE OBJECTS { apsStatusChannelMismatches, apsStatusCurrent } STATUS current DESCRIPTION "An apsTrapChannelMismatch notification is sent when the value of an instance of apsStatusChannelMismatches increments." ::= { rbnApsMIBNotifications 3 } apsTrapPSBF NOTIFICATION-TYPE OBJECTS { apsStatusPSBFs, apsStatusCurrent } STATUS current DESCRIPTION "An apsTrapPSBF notification is sent when the value of an instance of apsStatusPSBFs increments." ::= { rbnApsMIBNotifications 4 } apsTrapFEPLF NOTIFICATION-TYPE OBJECTS { apsStatusFEPLFs, apsStatusCurrent } STATUS current DESCRIPTION "An apsTrapFEPLFs notification is sent when the value of an instance of apsStatusFEPLFs increments." ::= { rbnApsMIBNotifications 5 } -- conformance information apsGroups OBJECT IDENTIFIER ::= { rbnApsMIBConformance 1 } apsCompliances OBJECT IDENTIFIER ::= { rbnApsMIBConformance 2 } apsCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for linear APS groups." MODULE MANDATORY-GROUPS { apsConfigGeneral, apsStatusGeneral, apsChanGeneral } OBJECT apsConfigMode MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT apsConfigSdBerThreshold MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT apsConfigSfBerThreshold MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT apsConfigWaitToRestore MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT apsConfigRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT apsChanIfIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT apsChanPriority MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT apsChanRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." GROUP apsConfigOneToN DESCRIPTION "Implementation of this group is optional for all linear APS implementations. The information is applicable to groups implementing the linear APS 1:n architecture" GROUP apsCommandOnePlusOne DESCRIPTION "Implementation of this group is optional for all linear APS implementations. The information is applicable to groups implementing the linear APS 1+1 architecture and supporting set operations." GROUP apsCommandOneToN DESCRIPTION "Implementation of this group is optional for all linear APS implementations. The information is applicable to groups implementing the linear APS 1:n architecture and supporting set operations." GROUP apsChanOneToN DESCRIPTION "Implementation of this group is optional for all linear APS implementations. The information is applicable to groups implementing the linear APS 1:n architecture." GROUP apsTotalsGroup DESCRIPTION "Implementation of this group is optional for all linear APS implementations." GROUP apsMapGroup DESCRIPTION "Implementation of this group is optional for all linear APS implementations." ::= { apsCompliances 1 } -- units of conformance apsConfigGeneral OBJECT-GROUP OBJECTS { apsConfigMode, apsConfigSdBerThreshold, apsConfigSfBerThreshold, apsConfigCreationTime, apsConfigRowStatus } STATUS current DESCRIPTION "A collection of apsConfigTable objects providing configuration information applicable to all linear APS groups." ::= { apsGroups 1 } apsConfigOneToN OBJECT-GROUP OBJECTS { apsConfigWaitToRestore } STATUS current DESCRIPTION "The apsConfigTable object that provides information which is only applicable to groups implementing the linear APS 1:n architecture." ::= { apsGroups 2 } -- If set operations are not supported neither of the following two groups -- are implemented. If sets are supported only one of these groups is -- implemented for a linear APS group instance. apsCommandOnePlusOne OBJECT-GROUP OBJECTS { apsCommandSwitch } STATUS current DESCRIPTION "The apsCommandTable object which is applicable to groups implementing the linear APS 1+1 architecture. Also, set operations must be supported." ::= { apsGroups 3 } apsCommandOneToN OBJECT-GROUP OBJECTS { apsCommandSwitch, apsCommandControl } STATUS current DESCRIPTION "A collection of apsCommandTable objects which are applicable to groups implementing the linear APS 1:n architecture. Also, set operations must be supported." ::= { apsGroups 4 } apsStatusGeneral OBJECT-GROUP OBJECTS { apsStatusK1K2Rcv, apsStatusK1K2Trans, apsStatusCurrent, apsStatusModeMismatches, apsStatusChannelMismatches, apsStatusPSBFs, apsStatusFEPLFs } STATUS current DESCRIPTION "A collection of apsStatusTable objects providing status information applicable to all linear APS groups." ::= { apsGroups 5 } apsChanGeneral OBJECT-GROUP OBJECTS { apsChanIfIndex, apsChanRowStatus, apsChanStatus, apsChanSignalDegrades, apsChanSignalFailures, apsChanSwitchovers, apsChanLastSwitchover } STATUS current DESCRIPTION "A collection of channel objects providing information applicable to all linear APS channels." ::= { apsGroups 6 } apsChanOneToN OBJECT-GROUP OBJECTS { apsChanPriority } STATUS current DESCRIPTION "The apsChanConfigTable object that provides information which is only applicable to groups implementing the linear APS 1:n architecture." ::= { apsGroups 7 } apsTotalsGroup OBJECT-GROUP OBJECTS { apsConfigGroups, apsChanLTEs } STATUS current DESCRIPTION "A collection of objects providing optional counts of configured APS groups and SONET LTE interfaces." ::= { apsGroups 8 } apsMapGroup OBJECT-GROUP OBJECTS { apsMapGroupName, apsMapChanNumber } STATUS current DESCRIPTION "A collection of apsMapTable objects providing a mapping from sonet(39) InterfaceIndex to group name and channel number for assigned APS channels and a list of unassigned sonet(39) interfaces." ::= { apsGroups 9 } apsTrapOptional NOTIFICATION-GROUP NOTIFICATIONS {apsTrapSwitchover, apsTrapModeMismatch, apsTrapChannelMismatch, apsTrapPSBF, apsTrapFEPLF } STATUS current DESCRIPTION "A collection of SONET linear APS notifications that may optionally be implemented." ::= { apsGroups 10 } END -- -- Copyright (C) The Internet Society (1999). All Rights Reserved. -- -- This document and translations of it may be copied and furnished -- to others, and derivative works that comment on or otherwise -- explain it or assist in its implmentation may be prepared, copied, -- published and distributed, in whole or in part, without -- restriction of any kind, provided that the above copyright notice -- and this paragraph are included on all such copies and derivative -- works. However, this document itself may not be modified in any -- way, such as by removing the copyright notice or references to the -- Internet Society or other Internet organizations, except as needed -- for the purpose of developing Internet standards in which case the -- procedures for copyrights defined in the Internet Standards -- process must be followed, or as required to translate it into -- languages other than English. -- -- The limited permissions granted above are perpetual and will not -- be revoked by the Internet Society or its successors or assigns. -- -- This document and the information contained herein is provided on -- an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET -- ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR -- IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF -- THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED -- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR -- PURPOSE."