-- extracted from draft-ietf-sip-mib-05.txt -- at Fri May 14 06:21:05 2004 SIP-SERVER-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32, Unsigned32, Gauge32, mib-2 FROM SNMPv2-SMI RowStatus, TruthValue, TimeStamp, DateAndTime FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB applIndex FROM NETWORK-SERVICES-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB; sipServerMIB MODULE-IDENTITY LAST-UPDATED "200302250000Z" ORGANIZATION "IETF SIP Working Group, SIP MIB Team" CONTACT-INFO "SIP MIB email: sip@ietf.org Co-editor Kevin Lingle Cisco Systems, Inc. postal: 7025 Kit Creek Road P.O. Box 14987 Research Triangle Park, NC 27709 USA email: klingle@cisco.com phone: +1 919 392 2029 Co-editor Joon Maeng ipDialog, Inc. postal: 7701 N. Lamar Blvd., Suite 304 Austin, TX 78752-1023 USA email: jmaeng@ipdialog.com phone: +1 512 371 1770 Co-editor Dave Walker SS8 Networks, Inc. postal: 495 March Road Kanata, ON K2K 3G1 Canada email: drwalker@ss8.com phone: +1 613 592 2100 Co-editor Jean-Francois Mule CableLabs postal: 400 Centennial Parkway Louisville, CO 80027 USA email: jf.mule@cablelabs.com phone: +1 303 661 3708 " DESCRIPTION "Session Initiation Protocol (SIP) Server MIB module. SIP is an application-layer signaling protocol for creating, modifying and terminating multimedia sessions with one or more participants. These sessions include Internet multimedia conferences and Internet telephone calls. SIP is defined in RFC 2543 (March 1999). This MIB is defined for the management of SIP Proxy, Redirect, and Registrar Servers. A Proxy Server acts as both a client and a server. It accepts requests from other clients, either responding to them or passing them on to other servers, possibly after modification. A Redirect Server accepts requests from clients and returns zero or more addresses to that client. Unlike a User Agent Server it does not accept calls. A Registrar is a server that accepts REGISTER requests. A Registrar is typically co-located with a Proxy or Redirect Server. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC XXXX; see the RFC itself for full legal notices." REVISION "200302250000Z" DESCRIPTION "Initial version of the IETF SIP-SERVER-MIB module. This version published as part of RFC XXXX." ::= { mib-2 xx } -- xx to be assigned by IANA -- Top-Level Components of this MIB. sipServerMIBObjects OBJECT IDENTIFIER ::= { sipServerMIB 1 } sipServerMIBConform OBJECT IDENTIFIER ::= { sipServerMIB 2 } -- -- These groups contains objects common to all SIP servers. -- sipServerCfg OBJECT IDENTIFIER ::= { sipServerMIBObjects 1 } sipServerStats OBJECT IDENTIFIER ::= { sipServerMIBObjects 2 } -- -- Common Server Configuration Objects -- sipServerCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF SipServerCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains configuration objects applicable to SIP redirect and proxy servers." ::= { sipServerCfg 1 } sipServerCfgEntry OBJECT-TYPE SYNTAX SipServerCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of common configuration. Each row represents those objects for a particular SIP server present in this system. applIndex is used to uniquely identify these instances of SIP servers and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788). The same value of applIndex used in the corresponding SIP-COMMON-MIB is used here." INDEX { applIndex } ::= { sipServerCfgTable 1 } SipServerCfgEntry ::= SEQUENCE { sipServerHostAddrType InetAddressType, sipServerHostAddr InetAddress, sipPgpVersion SnmpAdminString, sipServerContactDfltAction INTEGER, sipServerRespectUAAction TruthValue } sipServerHostAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of Internet address by which the SIP server is reachable." REFERENCE "RFC 2543, Section 2" ::= { sipServerCfgEntry 1 } sipServerHostAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(1..254)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the host portion of a SIP URL that is assigned to the SIP server. It may contain a fully qualified domain name, or an IP address. The length of the value will depend on the type of address specified. sipServerHostAddrType formalizes the type of address given by this object. It is the users responsibility to maintain consistency between this object and the type specified by sipServerHostAddrType." REFERENCE "RFC 2543, Section 2" ::= { sipServerCfgEntry 2 } -- -- Security -- sipPgpVersion OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the version of PGP (Pretty Good Privacy) supported by this server. Common values are 2.6.2 and 5.0." ::= { sipServerCfgEntry 3 } -- -- Additional Server Configuration -- sipServerContactDfltAction OBJECT-TYPE SYNTAX INTEGER { redirect(1), proxy(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether the default contact action of the server is to be a proxy or a redirect server. A User Agent may indicate a preference upon registration of Contact information. The value of this object is used in the absence of such an indication." REFERENCE "RFC 2543, Section 6.13" ::= { sipServerCfgEntry 4 } sipServerRespectUAAction OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether the server should respect the wishes of a User Agent when the UA specifies a server action (proxy or redirect) for certain Contact information. If the value of this object is false, then the value contained in the sipServerContactDfltAction is used." REFERENCE "RFC 2543, Section 6.13" ::= { sipServerCfgEntry 5 } -- -- This group contains MIB objects related to SIP Proxy Servers. -- sipProxyCfg OBJECT IDENTIFIER ::= { sipServerMIBObjects 3 } sipProxyStats OBJECT IDENTIFIER ::= { sipServerMIBObjects 4 } -- -- Proxy Server Configuration -- sipProxyCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF SipProxyCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains configuration objects applicable to SIP proxy servers." ::= { sipProxyCfg 1 } sipProxyCfgEntry OBJECT-TYPE SYNTAX SipProxyCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of common proxy configuration. Each row represents those objects for a particular SIP server present in this system. applIndex is used to uniquely identify these instances of SIP servers and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788). The same value of applIndex used in the corresponding SIP-COMMON-MIB is used here." INDEX { applIndex } ::= { sipProxyCfgTable 1 } SipProxyCfgEntry ::= SEQUENCE { sipRequestMaxExpires Unsigned32, sipProxyStatefulness INTEGER, sipProxySendsCancel TruthValue, sipProxyForwardAll1xx TruthValue, sipProxyRecursion TruthValue, sipProxyProvideAlternatives TruthValue, sipProxyRecordRoute TruthValue, sipProxyStateTimeout Integer32, sipProxyAuthMethod BITS, sipProxyAuthPgpAlgorithm INTEGER, sipProxyAuthRealm SnmpAdminString, sipProxyNonceLifeTime Integer32, sipPgpPrivateKey OCTET STRING } sipRequestMaxExpires OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the maximum duration that a SIP proxy server will accept from a client in the Expires header." ::= { sipProxyCfgEntry 1 } sipProxyStatefulness OBJECT-TYPE SYNTAX INTEGER { stateless(1), transactionStateful(2), callStateful(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the default mode of operation for the proxy server entity. A stateless proxy entity does not maintain state for a SIP transaction. A stateless proxy forwards every request it receives downstream and every response it receives upstream. If the value of this object is stateless(1), the proxy defaults to stateless operations. A transaction stateful proxy, or simply a 'stateful proxy', maintains state information for the duration of a SIP transaction. If the value if this object is transactionStateful(2), the proxy is stateful on a transaction basis. A call stateful proxy does retain state that persists for the duration of a call initiated through it. To properly manage that state, the proxy will normally need to receive the BYE requests that terminate the call. If the value of this object is callStateful(3), the proxy is call stateful." REFERENCE "RFC 2543, Section 12.3" ::= { sipProxyCfgEntry 2 } sipProxySendsCancel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether or not a forking proxy sends CANCEL on outstanding branch requests after receiving a 2xx or 6xx, or after the request times-out. If the value of this object is 'true', the server sends a CANCELs on branches where no definitive response has been received. If 'false', the proxy does not send CANCELs." REFERENCE "RFC 2543, Section 12.4" ::= { sipProxyCfgEntry 3 } sipProxyForwardAll1xx OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether or not the proxy forwards all 1xx responses, except the 100 Trying response, upstream towards the source of the request. If the value of this object is 'true', the 1xx responses are sent. If the value is 'false', duplicate 1xx responses are not sent upstream." ::= { sipProxyCfgEntry 4 } sipProxyRecursion OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether or not the Proxy performs recursive search on the Contacts provided in 3xx redirects. If the value of this object is 'true', a recursive search is performed. If the value is 'false', no search is performed, the 3xx response is sent upstream towards the source of the request." ::= { sipProxyCfgEntry 5 } sipProxyProvideAlternatives OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies whether or not the Server provides alternative Contacts in 3xx and 485 responses. If the value of this object is 'true', the server inserts a list of alternative URLs into a Contact header where the request Originator may possibly find the desired called party. If the value is 'false', the server doesn't add Contact information to 3xx and 485 responses. Note that the policies of a server may limit the particular alternatives that are returned when this object is set to 'true'." REFERENCE "RFC 2543, Section 6.13" DEFVAL { false } ::= { sipProxyCfgEntry 6 } sipProxyRecordRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether or not the proxy adds itself to the Record-Route header as a default action. This header is used to list the proxies that insist on being in the signaling path for subsequent requests related to the call-leg. If the value of this object is 'true', the proxy adds itself to the end of the Record-Route header, creating the header if required. If the value is 'false', the proxy doesn't add itself to the Record-Route header." REFERENCE "RFC 2543, Section 6.29" ::= { sipProxyCfgEntry 7 } sipProxyStateTimeout OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the duration after reception of the first INVITE response that a stateful proxy retains state in order to handle possible retransmissions of the response." REFERENCE "RFC 2543, Section 12.3.6" ::= { sipProxyCfgEntry 8 } -- -- Security -- sipProxyAuthMethod OBJECT-TYPE SYNTAX BITS { none(0), basic(1), digest(2), pgp(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the authentication method that is used to authenticate request originators. bit 0 no authentication is performed bit 1 HTTP basic is used bit 2 HTTP digest is used bit 3 PGP (Pretty Good Privacy) is used." ::= { sipProxyCfgEntry 9 } sipProxyAuthPgpAlgorithm OBJECT-TYPE SYNTAX INTEGER { other(1), md5(2), sha1(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the PGP algorithm the proxy uses." ::= { sipProxyCfgEntry 10 } sipProxyAuthRealm OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the realm used in Proxy- Authenticate headers. Note that this may need to be stored per user." ::= { sipProxyCfgEntry 11 } sipProxyNonceLifeTime OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the life-time of a given nonce. A nonce is a server specified value whose contents are opaque to the entity being authenticated and which is used in calculating authentication data. If this object has a value of zero, then nonces are not reused." ::= { sipProxyCfgEntry 12 } -- -- Proxy-Authenticate received by this server -- (i.e. this server is being authenticated by a peer) -- sipPgpPrivateKey OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is the server's private PGP key, used for both PGP authentication of this server and for PGP-based encryption." ::= { sipProxyCfgEntry 13 } -- -- Proxy Server Statistics -- sipProxyStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SipProxyStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the statistics objects applicable to all SIP Proxy Servers in this system." ::= { sipProxyStats 1 } sipProxyStatsEntry OBJECT-TYPE SYNTAX SipProxyStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of summary statistics. Each row represents those objects for a particular SIP server present in this system. applIndex is used to uniquely identify these instances of SIP servers and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788). The same value of applIndex used in the corresponding SIP-COMMON-MIB is used here." INDEX { applIndex } ::= { sipProxyStatsTable 1 } SipProxyStatsEntry ::= SEQUENCE { sipNumProxyRequireFailures Counter32 } sipNumProxyRequireFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the number of occurrences of unsupported options being specified in received Proxy- Require headers. Such occurrences result in a 420 Bad Extension status code being returned." ::= { sipProxyStatsEntry 1 } -- -- This group contains MIB objects related to SIP Redirect Servers. -- sipRedirCfg OBJECT IDENTIFIER ::= { sipServerMIBObjects 5 } sipRedirStats OBJECT IDENTIFIER ::= { sipServerMIBObjects 6 } -- none at this time -- -- This group contains MIB objects related to SIP Registrars. -- sipRegCfg OBJECT IDENTIFIER ::= { sipServerMIBObjects 7 } sipRegStats OBJECT IDENTIFIER ::= { sipServerMIBObjects 8 } -- -- Registrar Configuration -- sipRegCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF SipRegCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains configuration objects applicable SIP registrars." ::= { sipRegCfg 1 } sipRegCfgEntry OBJECT-TYPE SYNTAX SipRegCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of common registrar configuration. Each row represents those objects for a particular SIP server present in this system. applIndex is used to uniquely identify these instances of SIP servers and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788). The same value of applIndex used in the corresponding SIP-COMMON-MIB is used here." INDEX { applIndex } ::= { sipRegCfgTable 1 } SipRegCfgEntry ::= SEQUENCE { sipRegAllowThirdParty TruthValue, sipRegMaxContactExpiryDate Unsigned32, sipRegMaxUsers Unsigned32, sipRegCurrentUsers Gauge32, sipRegDfltRegActiveInterval Unsigned32 } sipRegAllowThirdParty OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether or not the Registrar should allows third party registrations. In third-party registration, the entity issuing the request (in the From header) is different from the entity being registered (in the To header) to whom the provided Contact information applies. If the value of this object is 'true', the Registrar allows third party registrations. If the value is 'false', third party registrations are rejected: a 403 Forbidden status code is returned to the requester." REFERENCE "RFC 2543, Section 4.2.6" ::= { sipRegCfgEntry 1 } sipRegMaxContactExpiryDate OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the maximum expiry that may be requested by a User Agent for a particular Contact. User Agents can specify expiry using either an Expiry header in a REGISTER request, or using an Expires parameter in a Contact header in a REGISTER request. If the value requested by the User Agent is greater than the value of this object, then the contact information is given the duration specified by this object, and that duration is indicated to the User Agent in the response." DEFVAL { 4294967295 } ::= { sipRegCfgEntry 2 } sipRegMaxUsers OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the maximum number of users that the registrar supports. The current number of users is reflected by sipRegCurrentUsers." ::= { sipRegCfgEntry 3 } sipRegCurrentUsers OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the number of users currently configured on the registrar." ::= { sipRegCfgEntry 4 } sipRegDfltRegActiveInterval OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the default time interval the Registrar considers registrations to be active. The value is used to compute the Expires header in the REGISTER response. If a user agent requests a time interval shorter than specified by this object, the Registrar should honor that request. If a Contact entry does not have an 'expires' parameter, this object is used as the default value." REFERENCE "Expires header, section 6.20 RFC2543" ::= { sipRegCfgEntry 5 } -- -- Per User Information -- sipRegUserTable OBJECT-TYPE SYNTAX SEQUENCE OF SipRegUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on all users registered to each Registrar in this system." ::= { sipRegCfg 2 } sipRegUserEntry OBJECT-TYPE SYNTAX SipRegUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains information for a single user registered to this Registrar. Each row represents those objects for a particular SIP server present in this system. applIndex is used to uniquely identify these instances of SIP servers and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788). The same value of applIndex used in the corresponding SIP-COMMON-MIB is used here." INDEX { applIndex, sipUserIndex } ::= { sipRegUserTable 1 } SipRegUserEntry ::= SEQUENCE { sipUserIndex Unsigned32, sipUserUri SnmpAdminString, sipUserAuthenticationFailures Counter32, sipUserTableRowStatus RowStatus } sipUserIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies a conceptual row in the table." ::= { sipRegUserEntry 1 } sipUserUri OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the user's address-of-record. It is the main form by which the registrar knows the user. The format is typically 'user@domain'. It is contained in the To header for all REGISTER requests." ::= { sipRegUserEntry 2 } sipUserAuthenticationFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains a count of the number of times the user has failed authentication." ::= { sipRegUserEntry 3 } sipUserTableRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of the entry. This object is required to create or delete rows remotely by a manager." ::= { sipRegUserEntry 4 } -- -- Per Contact Information -- sipContactTable OBJECT-TYPE SYNTAX SEQUENCE OF SipContactEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on every location where a registered user (specified by sipUserIndex) wishes to be found (i.e. the user has provided Contact information to each SIP Registrar in this system)." ::= { sipRegCfg 3 } sipContactEntry OBJECT-TYPE SYNTAX SipContactEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains information for a single Contact. Multiple contacts may exist for a single user. Each row represents those objects for a particular SIP server present in this system. applIndex is used to uniquely identify these instances of SIP servers and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788). The same value of applIndex used in the corresponding SIP-COMMON-MIB is used here." INDEX { applIndex, sipUserIndex, sipContactIndex } ::= { sipContactTable 1 } SipContactEntry ::= SEQUENCE { sipContactIndex Unsigned32, sipContactDisplayName SnmpAdminString, sipContactURI SnmpAdminString, sipContactLastUpdated TimeStamp, sipContactExpiry DateAndTime, sipContactPreference SnmpAdminString, sipContactAction INTEGER, sipContactRetryAfter DateAndTime } sipContactIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Along with the sipUserIndex, this object uniquely identifies a conceptual row in the table." ::= { sipContactEntry 1 } sipContactDisplayName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the display name for the Contact. For example, 'Santa at Home', or 'Santa on his Sled', corresponding to contact URLs of sip:BigGuy@sip.northpole.ca or sip:sclaus817@sip.mobile.com, respectively." ::= { sipContactEntry 2 } sipContactURI OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains either a SIP URL or a URI where the user can be contacted. This URI is normally returned to a client from a redirect server, or is used as the RequestURI in a SIP request line for requests forwarded by a proxy." ::= { sipContactEntry 3 } sipContactLastUpdated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time when this contact information was accepted. If the contact information is updated via a subsequent REGISTER of the same information, this object is also updated." ::= { sipContactEntry 4 } sipContactExpiry OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the date and time when the contact information will no longer be valid. Such times may be specified by the user at registration (Expires header or expiry parameter in the Contact information), or a system default can be applied." ::= { sipContactEntry 5 } sipContactPreference OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the preference for this contact relative to all other active contacts for same user. A registering user may provide this preference as a 'qvalue' parameter in the Contact header. The format of this item is a decimal number between 0 and 1 (for example 0.9). Higher values indicate locations preferred by the user." REFERENCE "RFC 2543, Section 6.13" ::= { sipContactEntry 6 } sipContactAction OBJECT-TYPE SYNTAX INTEGER { redirect(1), proxy(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the user wanted the server to act as a redirect server or as a proxy server. It is specified by the optional 'action' parameter in the Contact header." ::= { sipContactEntry 7 } sipContactRetryAfter OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates that the contact information is currently inactive, and that it should only be activated after the date and time specified by the object. This value is provided by a user when deleting contact information using a REGISTER request containing a Retry- After header." REFERENCE "RFC 2543, Section 6.32" ::= { sipContactEntry 8 } -- -- Registrar Statistics -- sipRegStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SipRegStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the summary statistics objects applicable to all SIP Registrars in this system." ::= { sipRegStats 1 } sipRegStatsEntry OBJECT-TYPE SYNTAX SipRegStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of summary statistics. Each row represents those objects for a particular SIP server present in this system. applIndex is used to uniquely identify these instances of SIP servers and correlate them through the common framework of the NETWORK-SERVICES-MIB (RFC 2788). The same value of applIndex used in the corresponding SIP-COMMON-MIB is used here." INDEX { applIndex } ::= { sipRegStatsTable 1 } SipRegStatsEntry ::= SEQUENCE { sipRegAcceptedRegistrations Counter32, sipRegRejectedRegistrations Counter32 } sipRegAcceptedRegistrations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains a count of the number of REGISTER requests that have been accepted (status code 200) by the Registrar. This includes additions of new contact information, refreshing contact information, as well as requests for deletion of contact information." ::= { sipRegStatsEntry 1 } sipRegRejectedRegistrations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains a count of the number REGISTER requests that have been rejected by the Registrar." ::= { sipRegStatsEntry 2 } -- -- Conformance -- sipServerMIBCompliances OBJECT IDENTIFIER ::= { sipServerMIBConform 1 } sipServerMIBGroups OBJECT IDENTIFIER ::= { sipServerMIBConform 2 } -- -- Compliance Statements -- sipProxyServerCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SIP entities acting as proxy servers." MODULE -- this module MANDATORY-GROUPS { sipServerConfigGroup, sipProxyConfigGroup, sipProxyStatsGroup } ::= { sipServerMIBCompliances 1 } sipRedirectServerCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SIP entities acting as redirect servers." MODULE -- this module MANDATORY-GROUPS { sipServerConfigGroup } ::= { sipServerMIBCompliances 2 } sipRegistrarServerCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SIP entities acting as registrars." MODULE -- this module MANDATORY-GROUPS { sipServerConfigGroup, sipRegistrarConfigGroup, sipRegistrarStatsGroup } ::= { sipServerMIBCompliances 3 } -- -- Units of Conformance -- sipServerConfigGroup OBJECT-GROUP OBJECTS { sipServerHostAddrType, sipServerHostAddr, sipPgpVersion, sipServerContactDfltAction, sipServerRespectUAAction } STATUS current DESCRIPTION "A collection of objects providing configuration common to SIP Proxy and Redirect servers." ::= { sipServerMIBGroups 1 } sipProxyConfigGroup OBJECT-GROUP OBJECTS { sipRequestMaxExpires, sipProxyStatefulness, sipProxySendsCancel, sipProxyForwardAll1xx, sipProxyRecursion, sipProxyProvideAlternatives, sipProxyRecordRoute, sipProxyStateTimeout, sipProxyAuthMethod, sipProxyAuthPgpAlgorithm, sipProxyAuthRealm, sipProxyNonceLifeTime, sipPgpPrivateKey } STATUS current DESCRIPTION "A collection of objects providing configuration for SIP Proxy servers." ::= { sipServerMIBGroups 2 } sipProxyStatsGroup OBJECT-GROUP OBJECTS { sipNumProxyRequireFailures } STATUS current DESCRIPTION "A collection of objects providing statistics for SIP Proxy servers." ::= { sipServerMIBGroups 3 } sipRegistrarConfigGroup OBJECT-GROUP OBJECTS { sipRegAllowThirdParty, sipRegMaxContactExpiryDate, sipRegMaxUsers, sipRegCurrentUsers, sipRegDfltRegActiveInterval, sipUserUri, sipUserAuthenticationFailures, sipUserTableRowStatus, sipContactDisplayName, sipContactURI, sipContactLastUpdated, sipContactExpiry, sipContactPreference, sipContactAction, sipContactRetryAfter } STATUS current DESCRIPTION "A collection of objects providing configuration for SIP Registrars." ::= { sipServerMIBGroups 4 } sipRegistrarStatsGroup OBJECT-GROUP OBJECTS { sipRegAcceptedRegistrations, sipRegRejectedRegistrations } STATUS current DESCRIPTION "A collection of objects providing statistics for SIP Registrars." ::= { sipServerMIBGroups 5 } END -- -- Copyright (C) The Internet Society (2003). All Rights Reserved. -- This document and translations of it may be copied and furnished to -- others, and derivative works that comment on or otherwise explain it -- or assist in its implementation may be prepared, copied, published -- and distributed, in whole or in part, without restriction of any -- kind, provided that the above copyright notice and this paragraph -- are included on all such copies and derivative works. However, this -- document itself may not be modified in any way, such as by removing -- the copyright notice or references to the Internet Society or other -- Internet organizations, except as needed for the purpose of -- developing Internet standards in which case the procedures for -- copyrights defined in the Internet Standards process must be -- followed, or as required to translate it into languages other than -- English. -- -- The limited permissions granted above are perpetual and will not be -- revoked by the Internet Society or its successors or assigns. -- -- This document and the information contained herein is provided on an -- "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING -- TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING -- BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION -- HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF -- MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.