-- extracted from draft-kalbfleisch-sspmmib-00.txt
-- at Thu Jul 20 07:08:05 2000

   SSPM-MIB DEFINITIONS ::= BEGIN

      IMPORTS

          MODULE-IDENTITY, OBJECT-TYPE, mib-2,
          Counter32, Counter64, Integer32, Unsigned32, TimeTicks
              FROM SNMPv2-SMI
          TEXTUAL-CONVENTION, DisplayString, DateAndTime, TimeInterval
              FROM SNMPv2-TC
          MODULE-COMPLIANCE, OBJECT-GROUP
              FROM SNMPv2-CONF
          InetAddressType, InetAddress FROM INET-ADDRESS-MIB
          InterfaceIndex FROM IF-MIB
          pmStudyClassID, protocolDirLocalIndex FROM PMCAPS-MIB;

      sspmMIB MODULE-IDENTITY
          LAST-UPDATED "0007041400Z"
          ORGANIZATION "Individidual submission"
          CONTACT-INFO
              "        Carl W. Kalbfleisch

               Postal: Verio, Inc.
                       1950 Stemmons Freeway
                       Suite 2026
                       Dallas, TX 75207
                       US

                  Tel: +1 214 853-7339
                  Fax: +1 214 744-0742
               E-mail: cwk@verio.net"
          DESCRIPTION
              "This SSPM MIB module is applicable to probes
               implementing Synthetic Source for Perfomance
               Monitoring fucntions."

             -- revision history

             REVISION    "0007041400Z"
             DESCRIPTION "Numerous updates."

             REVISION    "0006141400Z"
             DESCRIPTION "Initial version."

             ::= { mib-2 777 }

   --
   -- Object Identifier Assignements
   --
   sspmMIBObjects       OBJECT IDENTIFIER ::= { sspmMIB 1 }
   sspmMIBNotifications OBJECT IDENTIFIER ::= { sspmMIB 2 }
   sspmMIBConformance   OBJECT IDENTIFIER ::= { sspmMIB 3 }

   --
   -- Textual Conventions
   --
   --
   -- sspmGeneral
   --
   sspmGeneral           OBJECT IDENTIFIER ::= { sspmMIBObjects 1 }
   sspmClockResolution OBJECT-TYPE
       SYNTAX      Unsigned32
       MAX-ACCESS  read-only
       STATUS      current
       -- UNITS       Microseconds
       DESCRIPTION
           "A read only variable indicating the resolution
            of the measurements possible by this device.
            Suggest making the units microseconds."
       ::= { sspmGeneral 1 }

   sspmClockSource OBJECT-TYPE
       SYNTAX      INTEGER {
                           other (1),
                           manual (2),
                           gps (3),
                           ntp (4)
                   }
       MAX-ACCESS  read-only
       STATUS      current
       -- UNITS       MicroSeconds
       DESCRIPTION
           "A read only variable indicating the source of the clock.
            This is provided to allow a user to determine how accurate
            the timing mechanism is compared with other devices. This
            is mostly needed for the co-ordination of time values
            between probes for one-way measurements."
       ::= { sspmGeneral 2 }

   --
   -- sspmSource
   --
   -- Contains the IP Layer configuration information used by
   -- Synthetic Sources for Performance Monitoring algorithms.
   --
   sspmSource           OBJECT IDENTIFIER ::= { sspmMIBObjects 2 }

   sspmSourceTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF SspmSourceEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           ""
       ::= { sspmSource 1 }

   sspmSourceEntry OBJECT-TYPE
       SYNTAX      SspmSourceEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           ""
       INDEX { pmStudyClassID, protocolDirLocalIndex, sspmSourceInstance }
       ::= { sspmSourceTable 1}

   SspmSourceEntry ::= SEQUENCE {
       sspmSourceInstance Integer32,
       sspmSourceSrc InterfaceIndex,
       sspmSourceDestAddressType InetAddressType,
       sspmSourceDestAddress InetAddress,
       sspmSourcePacketSize UnsignedInteger32,
       sspmSourcePacketFillType INTEGER,
       sspmSourcePacketFillValue OCTET STRING,
       sspmSourceControl TruthValue,
       sspmSourceTimeOut MicroSeconds,
       sspmSourceSamplingDistribution INTEGER,
       sspmSourceFrequency MicroSeconds,
       sspmSourceTOS BITS,
       sspmSourceSrcRouteFill OCTET STRING,
       sspmSourceSourceSrcRouteLength INTEGER,
       sspmSourceTTL INTEGER,
       sspmSourceNoFrag INTEGER,
       sspmSourceOwner OwnerString,
       sspmSourceStatus RowStatus
   }


   sspmSourceInstance OBJECT-TYPE
       SYNTAX      Integer32
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "An arbitrary index to differentiate multiple
            instantiations of the source for a given
            application."
        ::= { sspmSourceEntry 1 }

   sspmSourceSrc OBJECT-TYPE
       SYNTAX      InterfaceIndex
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "ifIndex where the packet should originate from the
            probe (if it  matters). Zero value indicates it does
            not matter and the device decides."
       ::= { sspmSourceEntry 3 }

   sspmSourceDestAddressType OBJECT-TYPE
       SYNTAX      InetAddressType
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "The type of Internet address by which the destination
            is accessed."
       ::= { sspmSourceEntry 4 }

   sspmSourceDestAddress OBJECT-TYPE
       SYNTAX      InetAddress
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "The Internet address for the destination."
       ::= { sspmSourceEntry 5 }

   sspmSourcePacketSize OBJECT-TYPE
       SYNTAX      UnsignedInteger32
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "The size of packet to be transmitted in bytes.
            Should we bound to a max size?"
       ::= { sspmSourceEntry 6 }

   sspmSourcePacketFillType OBJECT-TYPE
       SYNTAX      INTEGER {
                           random (1),
                           pattern (2),
                           url(3)
                   }
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "Indicates how the packet is filled. 'random' indicates
            that the packet contains random data patterns. This
            is probe and implementation dependent. 'pattern'
            indicates that the pattern defined in the
            sspmSourcePacketFillValue attribute is used to
            fill the packet. 'url' indicates that the value
            of sspmSourcePacketFillValue should contain a URL.
            The contents of the document at that URL are retrieved
            and utilized in the packet."
       ::= { sspmSourceEntry 7 }

   sspmSourcePacketFillValue OBJECT-TYPE
       SYNTAX      OCTET STRING (0..255)
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "The string value to fill the packet with. If
            sspmSourcePacketFillType is set to 'pattern' then this
            pattern is repeated until the packet is
            sspmSourcePacketSize in bytes. Note that if
            length of the octet string specified for this
            value does not divide evenly into the packet
            size then an incomplete last copy of this data
            may be copied into the packet. If the value of
            sspmSourcePacketFillType is set to 'random' then
            this attribute is unused. If the value of the
            sspmSourcePacketFillType is set to 'url' then
            the URL specified in this attribute is retrieved
            and used by the probe."
       ::= { sspmSourceEntry 8 }

   sspmSourceControl OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "When set to Yes this test is enabled. When set to
            No, it is disabled."
       ::= { sspmSourceEntry 9 }

   sspmSourceTimeOut OBJECT-TYPE
       SYNTAX      MicroSeconds
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "Timeout value for the measurement response. If no
            response is received in the time specified then
            the test fails."
       ::= { sspmSourceEntry 10 }

   sspmSourceSamplingDistribution OBJECT-TYPE
       SYNTAX      INTEGER {
                            deterministic(1),
                            random(2)
                   }
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "When this attbute is set to 'deterministic', then
            packets are generated at sspmSourceFrequency rate.

            When this attribute is set to 'random' then packets
            are generated at sspmSourceFrequency rate with
            interpacket injections times distributes
            exponentially."
       ::= { sspmSourceEntry 11 }

   sspmSourceFrequency OBJECT-TYPE
       SYNTAX      MicroSeconds
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "The inverse of this value is the rate at which packets
            are generated. Refer to sspmSourceSamplingDistribution."
       ::= { sspmSourceEntry 12 }

   sspmSourceTOS OBJECT-TYPE
       SYNTAX      BITS
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "(yes, the whole 8 bit field)"
       ::= { sspmSourceEntry 13 }

   sspmSourceSrcRouteFill OBJECT-TYPE
       SYNTAX      OCTET STRING (7..39)
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "In the event that the test should run over a
            specific route. Intent is to force the route.
            Series of IP addresses along the path that would be
            put into the source route option in the IP header.
            Provide reference to IP Header RFC."
       ::= { sspmSourceEntry 14 }

   sspmSourceSourceSrcRouteLength OBJECT-TYPE
       SYNTAX      INTEGER(7..39)
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "In the event that the test should run over a
            specific route. Intent is to force the route.
            This attribute specifies the length of data
            to be copied from the sspmSourceSrcRouteFill."
       ::= { sspmSourceEntry 15 }

   sspmSourceTTL OBJECT-TYPE
       SYNTAX      INTEGER(0..255)
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
            "If non-zero specifies the value to place into
            the TTL field on transmission."
       ::= { sspmSourceEntry 16 }


   sspmSourceNoFrag OBJECT-TYPE
       SYNTAX      INTEGER {
                             fragment(1),
                             noFragment(2)
                   }
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "'noFragment' indicates that the Don't Fragment Bit should be
            set on transmission"
       ::= { sspmSourceEntry 17 }

   sspmSourceOwner OBJECT-TYPE
       SYNTAX      OwnerString
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "name of the mgmt station who set up the test."
       ::= { sspmSourceEntry 18 }

   sspmSourceStatus OBJECT-TYPE
       SYNTAX      RowStatus
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "Status of this test."
       ::= { sspmSourceEntry 19 }

   --
   -- sspmLinkLayerExtention
   --
   -- Contains additional detailed configuration used by
   -- some Synthetic Sources for Performance Monitoring
   -- algorithms at the link layer.
   --
   sspmLinkLayerExtention OBJECT IDENTIFIER ::= { sspmMIBObjects 3 }

   sspmLinkLayerExtentionTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF SspmLinkLayerExtentionEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           ""
       ::= { sspmLinkLayerExtention 1 }

   sspmLinkLayerExtentionEntry OBJECT-TYPE
       SYNTAX      SspmLinkLayerExtentionEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           ""
       INDEX { pmStudyClassID, protocolDirLocalIndex, sspmSourceInstance }
       ::= { sspmLinkLayerExtentionTable 1}

   SspmLinkLayerExtentionEntry ::= SEQUENCE {
       sspmLinkLayerExtension8021Tagging BITS,
       sspmLinkLayerStatus RowStatus
   }

   sspmLinkLayerExtension8021Tagging OBJECT-TYPE
       SYNTAX      BITS
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "802.1 queue tagging used in bridge environment.
            16 bit string. 12 bit vlan, 3 bits priority, 1
            bit may be unused."
       ::= { sspmLinkLayerExtentionEntry 1 }

   sspmLinkLayerStatus OBJECT-TYPE
       SYNTAX      RowStatus
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "Status of this test."
       ::= { sspmLinkLayerEntry 2 }

   --
   -- sspmApplLayerExtention
   --
   -- Contains additional detailed configuration used by
   -- some Synthetic Sources for Performance Monitoring
   -- algorithms at the application Layer.
   --
   sspmApplLayerExtention OBJECT IDENTIFIER ::= { sspmMIBObjects 4 }
   sspmApplLayerExtentionTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF SspmApplLayerExtentionEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           ""
       ::= { sspmApplLayerExtention 1 }

   sspmApplLayerExtentionEntry OBJECT-TYPE
       SYNTAX      SspmApplLayerExtentionEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           ""
       INDEX { pmStudyClassID, protocolDirLocalIndex, sspmSourceInstance }
       ::= { sspmApplLayerExtentionTable 1}

   SspmApplLayerExtentionEntry ::= SEQUENCE {
       sspmApplLayerExtentionUsername Utf8Sting,
       sspmApplLayerExtentionPassword Utf8Sting,
       sspmApplLayerExtentionParameter Utf8Sting,
       sspmApplLayerExtentionStatus RowStatus
   }

   sspmApplLayerExtentionUsername OBJECT-TYPE
       SYNTAX      Utf8String
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "An optional username used by the application protocol."
       ::= { sspmApplLayerExtentionEntry 1 }

   sspmApplLayerExtentionPassword OBJECT-TYPE
       SYNTAX      Utf8String
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "An optional password used by the application protocol."
       ::= { sspmApplLayerExtentionEntry 2 }

   sspmApplLayerExtentionParameter OBJECT-TYPE
       SYNTAX      Utf8String
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
            "An optional parameter used by the application protocol.
            For DNS this would be the hostname or IP. For HTTP,
            this would be the URL. For nntp this would be the
            news group. For TCP this would be the port number.
            For SMTP this would be the recipient (and could
            assume the message is predefined)."
       ::= { sspmApplLayerExtentionEntry 3 }

   sspmApplLayerExtentionStatus OBJECT-TYPE
       SYNTAX      RowStatus
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "Status of this test."
       ::= { sspmApplLayerExtentionEntry 17 }

   --
   -- sspmSinkTable
   --
   -- Contains attributes for configuration of Synthetic
   -- Sources for Performance Monitoring sinks. IE
   -- sinks for receipt of one-way delay measurements.
   --
   sspmSink           OBJECT IDENTIFIER ::= { sspmMIBObjects 5 }

   sspmSinkTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF SspmSinkEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           ""
       ::= { sspmSink 1 }

   sspmSinkEntry OBJECT-TYPE
       SYNTAX      SspmSinkEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           "NOTE: The index to this table probably needs to be adjusted."
       INDEX { pmStudyClassID, protocolDirLocalIndex }
       ::= { sspmSinkTable 1}

   SspmSinkEntry ::= SEQUENCE {
       sspmSinkSourceAddressType InetAddressType,
       sspmSinkSourceAddress InetAddress,
       sspmSinkExpectationRate MicroSeconds,
       sspmSinkEnable TruthValue,
       sspmSinkFirstSequenceNumber Integer32,
       sspmSinkLastSequenceNumber Integer32,
       sspmSinkLastSequenceInvalid Counter32,
       sspmSinkStatus RowStatus

   }

   sspmSinkSourceAddressType OBJECT-TYPE
       SYNTAX      InetAddressType
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "The type of Internet address of the source."
       ::= { sspmSinkEntry 1 }

   sspmSinkSourceAddress OBJECT-TYPE
       SYNTAX      InetAddress
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "The Internet address of the source."
       ::= { sspmSinkEntry 2 }

   sspmSinkExpectationRate OBJECT-TYPE
       SYNTAX      MicroSeconds
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "The expected rate of packets to arrive."
       ::= { sspmSinkEntry 3 }

   sspmSinkEnable OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "Indicates if the sink is enabled or not."
       ::= { sspmSinkEntry 4 }

   sspmSinkFirstSequenceNumber OBJECT-TYPE
       SYNTAX      Integer32
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "The expected first sequence number of packets."
       ::= { sspmSinkEntry 5 }

   sspmSinkLastSequenceNumber OBJECT-TYPE
       SYNTAX      Integer32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
           "The last sequence number received."
       ::= { sspmSinkEntry 6 }

   sspmSinkLastSequenceInvalid OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
           "The number of packets that arrived where their
            sequence number was not one plus the value of
            sspmSinkLastSequenceNumber."
       ::= { sspmSinkEntry 7 }

   sspmSinkStatus OBJECT-TYPE
       SYNTAX       RowStatus
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
            "Status of this conceptual row."
       ::= { sspmSinkEntry 8 }


   --
   -- sspmHistory
   --
   -- Defines attributes for capturing raw data history
   -- statistics.
   --
   sspmHistory           OBJECT IDENTIFIER ::= { sspmMIBObjects 6 }

   sspmHistoryMaxSize OBJECT-TYPE
       SYNTAX      Integer32
       MAX-ACCESS  read-write
       STATUS      current
       -- DEFVAL      1000
       DESCRIPTION
           "The maximum size of the sspmHistoryTable. Configuration
            of what happens when the sspmHistoryTable reaches this
            number of entries is controlled by the sspmHistoryControl
            attribute."
       ::= { sspmHistory 1}

   sspmHistoryControl OBJECT-TYPE
       SYNTAX      INTEGER {
                             wrap(1),
                             stop(2)
                   }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
           "Controls what happens to the sspmHistoryTable when the
            sspmHistoryMaxSize number of rows are in that table.
            Wrap - indicates that the table wraps and old entries
            are overwritten. Stop - indicates that the entries
            stop being written to that table."
       ::= { sspmHistory 2}

   sspmHistoryLastIndex OBJECT-TYPE
       SYNTAX  OBJECT IDENTIFIER
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
           "The index clause of the last entry written to the
            sspmHistoryTable."
       ::= { sspmHistory 3 }

   sspmHistoryTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF SspmHistoryEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           ""
       ::= { sspmHistory 4 }

   sspmHistoryEntry OBJECT-TYPE
       SYNTAX      SspmHistoryEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           ""
       INDEX { sspmHistoryIndex }
       ::= { sspmHistoryTable 1}

   SspmHistoryEntry ::= SEQUENCE {
       sspmHistoryIndex Integer32,
       sspmHistorySrcAddressType  InetAddressType,
       sspmHistorySrcAddress  InetAddress,
       sspmHistoryTimeFrame DateAndTime,
       sspmHistorySendTimeOffset MicroSeconds,
       sspmHistoryReceiveTimeOffset MicroSeconds,
       sspmHistorySequenceNumber Integer32
   }

   sspmHistoryIndex OBJECT-TYPE
       SYNTAX      Integer32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
           "Aribtrary monotonically increasing index value."
       ::= { sspmHistoryEntry 1 }

   sspmHistorySrcAddressType OBJECT-TYPE
       SYNTAX      InetAddressType
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
           "The type of Internet address where the packet originated from."
       ::= { sspmHistoryEntry 2 }

   sspmHistorySrcAddress OBJECT-TYPE
       SYNTAX      InetAddress
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
           "The Internet address where the packet originated from."
       ::= { sspmHistoryEntry 3 }

   sspmHistoryTimeFrame OBJECT-TYPE
       SYNTAX      DateAndTime
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
           "Give a base time for time stamps."
       ::= { sspmHistoryEntry 4 }

   sspmHistorySendTimeOffset OBJECT-TYPE
       SYNTAX      MicroSeconds
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
           "The time offset from sspmHistoryTimeFrame when the packet
            was transmitted."
       ::= { sspmHistoryEntry 5 }

   sspmHistoryReceiveTimeOffset OBJECT-TYPE
       SYNTAX      MicroSeconds
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
           "Time offset from sspmHistoryTimeFrame when the packet was
            received at the sink."
       ::= { sspmHistoryEntry 6 }

   sspmHistorySequenceNumber OBJECT-TYPE
       SYNTAX      Integer32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
           "The sequence number of the packet received."
       ::= { sspmHistoryEntry 7 }

   --
   -- Notifications
   --


   --
   -- Conformance
   --
   sspmMIBCompliances OBJECT IDENTIFIER ::= { sspmMIBConformance 1 }
   sspmMIBGroups      OBJECT IDENTIFIER ::= { sspmMIBConformance 2 }

   --
   -- Compliance
   --
   -- Envision the following:
   --
   --  - just SourceGroup
   --  - Source plus Extention
   --  - Source, Extention plus History
   --  - Source, Extention plus Sink
   --  - Source, Extention, Sink, History
   --

   --
   -- Groups
   --
   sspmGeneralGroup OBJECT-GROUP
       OBJECTS {
       sspmClockResolution,
       sspmClockSource
       }
       STATUS      current
       DESCRIPTION
           ""
       ::= { sspmMIBGroups 1 }

   sspmSourceGroup OBJECT-GROUP
       OBJECTS {
       sspmSourceInstance
       }
       STATUS      current
       DESCRIPTION
           ""
       ::= { sspmMIBGroups 2 }

   sspmLinkLayerExtentionGroup OBJECT-GROUP
       OBJECTS {
       sspmLinkLayerExtension8021Tagging
       }
       STATUS      current
       DESCRIPTION
           ""
       ::= { sspmMIBGroups 3 }

   sspmApplLayerExtentionGroup OBJECT-GROUP
       OBJECTS {
       sspmApplLayerExtentionUsername,
       sspmApplLayerExtentionPassword,
       sspmApplLayerExtentionParameter,
       sspmApplLayerExtentionStatus
       }
       STATUS      current
       DESCRIPTION
           ""
       ::= { sspmMIBGroups 4 }

   sspmSinkGroup OBJECT-GROUP
       OBJECTS {
       sspmSinkSourceAddressType,
       sspmSinkSourceAddress,
       sspmSinkExpectationRate,
       sspmSinkEnable,
       sspmSinkFirstSequenceNumber,
       sspmSinkLastSequenceNumber,
       sspmSinkLastSequenceInvalid,
       sspmSinkStatus
       }
       STATUS      current
       DESCRIPTION
           ""
       ::= { sspmMIBGroups 5 }

   sspmHistoryGroup OBJECT-GROUP
       OBJECTS {
       sspmHistoryMaxSize,
       sspmHistoryControl,
       sspmHistoryLastIndex,
       sspmHistoryIndex,
       sspmHistorySrcAddressType,
       sspmHistorySrcAddress,
       sspmHistoryTimeFrame,
       sspmHistorySendTimeOffset,
       sspmHistoryReceiveTimeOffset,
       sspmHistorySequenceNumber
       }
       STATUS      current
       DESCRIPTION
           ""
       ::= { sspmMIBGroups 6 }

   END

-- 
--    This document and translations of it may be copied and furnished to
--    others, and derivative works that comment on or otherwise explain it
--    or assist in its implementation may be prepared, copied, published
--    and distributed, in whole or in part, without restriction of any
--    kind, provided that the above copyright notice and this paragraph are
--    included on all such copies and derivative works.  However, this
--    document itself may not be modified in any way, such as by removing
--    the copyright notice or references to the Internet Society or other
--    Internet organizations, except as needed for the purpose of
--    developing Internet standards in which case the procedures for
--    copyrights defined in the Internet Standards process must be
--    followed, or as required to translate it into languages other than
--    English.
-- 
--    The limited permissions granted above are perpetual and will not be
--    revoked by the Internet Society or its successors or assigns.
-- 
--    This document and the information contained herein is provided on an
--    "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
--    TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
--    BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
--    HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
--    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
-- 
--