-- extracted from draft-ietf-syslog-device-mib-06.txt -- at Thu Mar 17 06:25:43 2005 SYSLOG-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32, Integer32, mib-2 FROM SNMPv2-SMI RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue, StorageType FROM SNMPv2-TC InetAddressType, InetAddress, InetAddressPrefixLength FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB; syslogMIB MODULE-IDENTITY LAST-UPDATED "200502160000Z" -- Wed February 16 00:00 GMT 2005 ORGANIZATION "IETF Syslog Working Group" CONTACT-INFO " Glenn Mansfield Keeni Postal: Cyber Solutions Inc. 6-6-3, Minami Yoshinari Aoba-ku, Sendai, Japan 989-3204. Tel: +81-22-303-4012 Fax: +81-22-303-4015 E-mail: glenn@cysols.com Support Group E-mail: mip6@ietf.org " DESCRIPTION "The MIB module pertaining to the reception and processing of Syslog compatible messages. Copyright (C) The Internet Society 2005. This version of this MIB module is part of RFC XXXX; see the RFC itself for full legal notices. " -- RFC Ed.: replace XXXX with actual RFC number & remove this note REVISION "200502160000Z" -- Wed February 16 00:00 GMT 2005 DESCRIPTION "Initial version, published as RFC XXXX." -- RFC Ed.: replace XXXX with actual RFC number & remove this note ::= { mib-2 YYY } -- Will be assigned by IANA -- IANA Reg.: Please assign a value for "YYY" under the 'mib-2' -- subtree and record the assignment in the SMI Numbers registry. -- RFC Ed.: When the above assignment has been made, please -- remove the above note -- replace "YYY" here with the assigned value and -- remove this note. -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- SyslogFacility ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention enumerates the facilities that originate syslog messages. The value noMap(99) indicates that the appropriate facility will be provided by the application on the managed entity. If this option is not available on a particular entity, attempts to set the facillity to this value will fail with an error-status of wrongValue. " REFERENCE "The BSD syslog Protocol (RFC 3164) sec. 4.1.1 (Table 1). " SYNTAX INTEGER { kernel (0), -- kernel messages user (1), -- user-level messages mail (2), -- mail system daemon (3), -- system daemons auth (4), -- authorization messages syslog (5), -- messages generated by syslogd lpr (6), -- line printer subsystem news (7), -- network news subsystem uucp (8), -- UUCP subsystem cron (9), -- clock daemon authPriv (10),-- authorization messages -- (private) ftp (11),-- ftp daemon ntp (12),-- NTP subsystem security (13),-- security subsystems -- (firewalling, etc.) console (14),-- /dev/console output local0 (16), local1 (17), local2 (18), local3 (19), local4 (20), local5 (21), local6 (22), local7 (23), noMap (99) } SyslogSeverity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention enumerates the severity levels of syslog messages. The syslog protocol uses the values 0 (emergency), to 7 (debug)." REFERENCE "The BSD syslog Protocol (RFC 3164) sec. 4.1.1 (Table 2) " SYNTAX INTEGER { emergency (0), -- system is unusable alert (1), -- action must be taken -- immediately critical (2), -- critical conditions error (3), -- error conditions warning (4), -- warning conditions notice (5), -- normal but significant -- condition info (6), -- informational debug (7), -- debug-level messages other (99) -- none of the above } SyslogSeverityCompOP ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The operator that will be applied to the severity before the selection for an action takes place. " SYNTAX INTEGER { none (1), greaterThanOrEqual (2), lessThanOrEqual (3), greaterThan (4), lessThan (5), notGreaterThanOrEqual (6), notLessThanOrEqual (7), notGreaterThan (8), notLessThan (9), equal (10), notEqual (11) } SyslogTransport ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Transport that will be used to send and/or receive messages. " REFERENCE "The The BSD syslog Protocol RFC 3164 Sec. 2. " SYNTAX INTEGER { any (1), udp (2), tcp (3) } SyslogService ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The service name or port number that will be used to send and/or receive messages. The special name ''any'' is reserved. It denotes all ports and is applicable only in the context of message reception. In case the service name is given, and it is not ''any'', the service name must resolve to a port number on the local host. " SYNTAX OCTET STRING (SIZE (0..255)) -- ------------------------------------------------------------- -- syslogMIB - the main groups -- ------------------------------------------------------------- syslogSystem OBJECT IDENTIFIER ::= { syslogMIB 1 } syslogProc OBJECT IDENTIFIER ::= { syslogMIB 2 } -- ------------------------------------------------------------- -- syslogSystem -- ------------------------------------------------------------- -- The system wide parameters syslogDefaultTransport OBJECT-TYPE SYNTAX SyslogTransport MAX-ACCESS read-write STATUS current DESCRIPTION "The default transport that a syslog process will use to send syslog messages. The value of this object SHOULD remain unchanged across reboots of the managed entity. " REFERENCE "The BSD syslog Protocol RFC 3164 Sec. 2. " DEFVAL {udp} ::= { syslogSystem 1 } syslogDefaultService OBJECT-TYPE SYNTAX SyslogService MAX-ACCESS read-write STATUS current DESCRIPTION "The default service name or port number that a syslog process will use to send syslog messages. The value of this object SHOULD remain unchanged across reboots of the managed entity. " REFERENCE "The BSD syslog Protocol RFC 3164 Sec. 2. " DEFVAL { "514" } ::= { syslogSystem 2 } syslogDefaultFacility OBJECT-TYPE SYNTAX SyslogFacility MAX-ACCESS read-write STATUS current DESCRIPTION "The default syslog facility that will be added to syslog messages when the message needs to be relayed and does not have priority specified. The value of this object SHOULD remain unchanged across reboots of the managed entity. " ::= { syslogSystem 3 } syslogDefaultSeverity OBJECT-TYPE SYNTAX SyslogSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "The default syslog severity that will be added to syslog messages when the message needs to be relayed and does not have priority specified. The value of this object SHOULD remain unchanged across reboots of the managed entity. " ::= { syslogSystem 4 } syslogMaxMessageSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum size of the syslog messages in bytes. The value of this object SHOULD remain unchanged across reboots of the managed entity. " DEFVAL { 1024 } ::= { syslogSystem 5 } -- ------------------------------------------------------------- -- syslogProc -- ------------------------------------------------------------- syslogProcTable OBJECT-TYPE SYNTAX SEQUENCE OF SyslogProcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about the syslog processes serviced by an SNMP agent. " ::= { syslogProc 1 } syslogProcEntry OBJECT-TYPE SYNTAX SyslogProcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information pertaining to a syslog process. " INDEX { syslogProcIndex } ::= { syslogProcTable 1 } SyslogProcEntry ::= SEQUENCE { syslogProcIndex Unsigned32, syslogProcMsgsReceived Counter32, syslogProcMsgsRelayed Counter32, syslogProcMsgsDropped Counter32, syslogProcMsgsIllFormed Counter32, syslogProcMsgsIgnored Counter32, syslogProcMsgsRejected Counter32, syslogProcLastMsgRecdTime TimeStamp, syslogProcLastMsgDeliveredTime TimeStamp, syslogProcStartTime TimeStamp, syslogProcLastError SnmpAdminString, syslogProcLastErrorTime TimeStamp, syslogProcReference Integer32 } -- option for allowed peers needs to be added syslogProcIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Index that uniquely identifies the syslog process in the syslogProcess table. " ::= { syslogProcEntry 1 } syslogProcMsgsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages received by the syslog process. This includes messages that were ignored. " ::= { syslogProcEntry 2 } syslogProcMsgsRelayed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages relayed by the syslog process to other syslog processes. " ::= { syslogProcEntry 3 } syslogProcMsgsDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages that could not be relayed (could not be queued for transmitting)." ::= { syslogProcEntry 4 } syslogProcMsgsIllFormed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages that were rejected by the syslog process because these were not well-formed. " ::= { syslogProcEntry 5 } syslogProcMsgsIgnored OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages that were not processed by the syslog process because the message did not meet the message selection criteria for the syslog process. For example, in the case of BSD syslog messages, either the program name or the priority level of the message or both did not match any selection specified for this process in the syslog process' configuration file " ::= { syslogProcEntry 6 } syslogProcMsgsRejected OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages that were rejected by the syslog process because the messsage was from a host/service that did not match any selection specified for this process and was not on the allowed host/services list. " ::= { syslogProcEntry 7 } syslogProcLastMsgRecdTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The local time when the last message was received by the syslog process locally or from a remote syslog process. " ::= { syslogProcEntry 8 } syslogProcLastMsgDeliveredTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The local time when the last message was delivered by the syslog process. " ::= { syslogProcEntry 9 } syslogProcStartTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The local time when this process was started. " ::= { syslogProcEntry 10 } syslogProcLastError OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A description of the last error that was encountered by this process. " ::= { syslogProcEntry 11 } syslogProcLastErrorTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The local time when the last error was encountered. " ::= { syslogProcEntry 12 } syslogProcReference OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "If the Host resource MIB is serviced on the host then this will entry will have the value of the hrSWRunIndex of the corresponding entry in the hrSWRunTable. Otherwise this object will be inaccessible, " ::= { syslogProcEntry 13 } syslogParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF SyslogParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about the parameters that control the syslog processes. " ::= { syslogProc 2 } syslogParamsEntry OBJECT-TYPE SYNTAX SyslogParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameters pertaining to a syslog process." INDEX { syslogProcIndex } ::= { syslogParamsTable 1 } SyslogParamsEntry ::= SEQUENCE { syslogParamsProcDescr SnmpAdminString, syslogParamsBindAddrType InetAddressType, syslogParamsBindAddr InetAddress, syslogParamsSendToAllAddresses TruthValue, syslogParamsCompression INTEGER, syslogParamsConfFileName SnmpAdminString, syslogParamsFacilityTranslation INTEGER, syslogParamsPIDFileName SnmpAdminString, syslogParamsDNSLookup INTEGER, syslogParamsSeverityCompOP SyslogSeverityCompOP, syslogParamsSecuritySpecs INTEGER, syslogParamsProcessStatus INTEGER, syslogParamsStorageType StorageType, syslogParamsRowStatus RowStatus } syslogParamsProcDescr OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "A user definable description of the syslog process. " ::= { syslogParamsEntry 1 } syslogParamsBindAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of Internet address which follows in syslogParamsBindAddr. " ::= { syslogParamsEntry 2 } syslogParamsBindAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The specific IP address or hostname the syslog process will bind to. If a hostname is specified, the IPv4 or IPv6 address corresponding to the hostname will be used. " ::= { syslogParamsEntry 3 } syslogParamsSendToAllAddresses OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the destination host, for a message to be forwarded, has more than one A or AAAA record process, Send the message to all the addresses (true) else send to only one of the addresses. " DEFVAL { false } ::= { syslogParamsEntry 4 } syslogParamsCompression OBJECT-TYPE SYNTAX INTEGER { off (1), offIfPipe (2), on (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "If 'off', disable the compression of repeated instances of the same line into a single line of the form ``last message repeated N times''. If 'offIfPipe' disable the compression when the output is a pipe to another program. Otherwise the compression is enabled. The value of this object SHOULD remain unchanged across reboots of the managed entity. " DEFVAL { on } ::= { syslogParamsEntry 5 } syslogParamsConfFileName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The fullpath name of the configuration file where the syslog process's message selection and corresponding action rules will be read from. The syslog process reads its configuration information from this file. If the system does not support the specification of a configuration file this field will not be accessible. " DEFVAL { "/etc/syslog.conf" } ::= { syslogParamsEntry 6 } syslogParamsFacilityTranslation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If false(2), disable the translation of messages received with facility ``kern'' to facility ``user''. Usually the ``kern'' facility is reserved for messages read directly from /dev/klog. The value of this object SHOULD remain unchanged across reboots of the managed entity. " DEFVAL { true } ::= { syslogParamsEntry 7 } syslogParamsPIDFileName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The fullpath name of the file where the syslog process ID will be recorded. In case the system does not support the feature of recording syslog's process ID - this object will not be accessible. " DEFVAL { "/etc/syslog.pid" } ::= { syslogParamsEntry 8 } syslogParamsDNSLookup OBJECT-TYPE SYNTAX INTEGER { useLocalCache (1), doNotUseLocalCache (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If doNotUseLocalCache is on, fresh DNS lookups will be carried out everytime a hostname is encountered. Else, DNS lookups will be carried out only once for each hostname. The value of this object SHOULD remain unchanged across reboots of the managed entity. " DEFVAL { useLocalCache } ::= { syslogParamsEntry 9 } syslogParamsSeverityCompOP OBJECT-TYPE SYNTAX SyslogSeverityCompOP MAX-ACCESS read-create STATUS current DESCRIPTION "The default value of the operator that should be applied to the syslogCtlSelectionSeverity before the selection takes place. " DEFVAL { greaterThanOrEqual } ::= { syslogParamsEntry 10 } syslogParamsSecuritySpecs OBJECT-TYPE SYNTAX INTEGER { none (1), doNotRecvFromRemoteHosts (2), doNotOpenNetworkSockets (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "If doNotRecvFromRemoteHosts is selected then the corresponding syslog process will not receive messages from remote hosts. If doNotOpenNetworkSockets is selected then the syslog process will not receive from or forward to remote hosts. " DEFVAL { none } ::= { syslogParamsEntry 11 } syslogParamsProcessStatus OBJECT-TYPE SYNTAX INTEGER { unknown (1), started (2), suspended(3), stopped (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the process. " DEFVAL { unknown } ::= { syslogParamsEntry 12 } syslogParamsStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines whether the parameters defined in this row are kept in volatile storage and lost upon reboot or are backed up by non-volatile (permanent) storage. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. " ::= { syslogParamsEntry 13 } syslogParamsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create, modify and delete rows in the syslogParamsTable. Objects in a row can be modified only when the value of this object in the corresponding conceptual row is not ''active''. Thus to modify one or more of the objects in this conceptual row, a. change the row status to ''notInService'', b. change the values of the row c. change the row status to ''active'' The syslogParamsRowStatus may be changed to ''active'' iff all the MOs in the conceptual row have been assigned valid values. " ::= { syslogParamsEntry 14 } syslogAllowedHostsTable OBJECT-TYPE SYNTAX SEQUENCE OF SyslogAllowedHostsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about the Hosts from which messages will be accepted. " ::= { syslogProc 3 } syslogAllowedHostsEntry OBJECT-TYPE SYNTAX SyslogAllowedHostsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The host information." INDEX { syslogProcIndex } ::= { syslogAllowedHostsTable 1 } SyslogAllowedHostsEntry ::= SEQUENCE { syslogAllowedHostsAddressType InetAddressType, syslogAllowedHostsAddress InetAddress, syslogAllowedHostsMaskLen InetAddressPrefixLength, syslogAllowedHostsTransport SyslogTransport, syslogAllowedHostsPort SyslogService, syslogAllowedHostsStorageType StorageType, syslogAllowedHostsRowStatus RowStatus } syslogAllowedHostsAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of Internet address which follows in syslogAllowedHostsAddress. " ::= { syslogAllowedHostsEntry 1 } syslogAllowedHostsAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address or hostname specification of the host from which the syslog process will accept messages. " ::= { syslogAllowedHostsEntry 2 } syslogAllowedHostsMaskLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "If the syslogAllowedHostsAddressType is ipv4(1), ipv6(2) this object represents the number of bits that will be taken into account when the address of the originating is being compared with syslogAllowedHostsAddress. The default value of this MO will be the length of the corresponding syslogAllowedHostsAddress. If the syslogAllowedHostsAddressType is not ipv4(1) or ipv6(2) this object is not used. A value of 0 indicates that the prefix is not used or is not applicable. " DEFVAL { 0 } ::= { syslogAllowedHostsEntry 3 } syslogAllowedHostsTransport OBJECT-TYPE SYNTAX SyslogTransport MAX-ACCESS read-create STATUS current DESCRIPTION "The Transport specification that will be used to decide whether the messsage will be accepted from a host or not. " DEFVAL { udp } ::= { syslogAllowedHostsEntry 4 } syslogAllowedHostsPort OBJECT-TYPE SYNTAX SyslogService MAX-ACCESS read-create STATUS current DESCRIPTION "The port specification that will be used to decide whether the messsage will be accepted from a host or not. " DEFVAL { "any" } ::= { syslogAllowedHostsEntry 5 } syslogAllowedHostsStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines whether the parameters defined in this row are kept in volatile storage and lost upon reboot or are backed up by non-volatile (permanent) storage. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. " ::= { syslogAllowedHostsEntry 6 } syslogAllowedHostsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create and delete rows in the syslogAllowedHostsTable. All the columns in this conceptual row MUST have valid values before this column can be assigned the value ''active''. " ::= { syslogAllowedHostsEntry 7 } -- ------------------------------------------------------------- -- Conformance Information -- ------------------------------------------------------------- syslogConformance OBJECT IDENTIFIER ::= { syslogMIB 4 } syslogGroups OBJECT IDENTIFIER ::= { syslogConformance 1 } syslogCompliances OBJECT IDENTIFIER ::= { syslogConformance 2 } -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- syslogSystemGroup OBJECT-GROUP OBJECTS { syslogDefaultTransport, syslogDefaultService, syslogDefaultFacility, syslogDefaultSeverity, syslogMaxMessageSize } STATUS current DESCRIPTION "A collection of objects providing system-wide parameters for syslog processes. " ::= { syslogGroups 1} syslogStatsGroup OBJECT-GROUP OBJECTS { -- syslogProcIndex, syslogProcMsgsReceived, syslogProcMsgsRelayed, syslogProcMsgsDropped, syslogProcMsgsIllFormed, syslogProcMsgsIgnored, syslogProcMsgsRejected, syslogProcLastMsgRecdTime, syslogProcLastMsgDeliveredTime, syslogProcStartTime, syslogProcLastError, syslogProcLastErrorTime, syslogProcReference } STATUS current DESCRIPTION "A collection of objects providing message related statistics." ::= { syslogGroups 2} syslogParamsGroup OBJECT-GROUP OBJECTS { syslogParamsProcDescr, syslogParamsBindAddrType, syslogParamsBindAddr, syslogParamsSendToAllAddresses, syslogParamsCompression, syslogParamsConfFileName, syslogParamsFacilityTranslation, syslogParamsPIDFileName, syslogParamsDNSLookup, syslogParamsSeverityCompOP, syslogParamsSecuritySpecs, syslogParamsProcessStatus, syslogParamsStorageType, syslogParamsRowStatus, syslogAllowedHostsAddressType, syslogAllowedHostsAddress, syslogAllowedHostsMaskLen, syslogAllowedHostsTransport, syslogAllowedHostsPort, syslogAllowedHostsStorageType, syslogAllowedHostsRowStatus } STATUS current DESCRIPTION "A collection of objects representing the run time parameters for the syslog processes. " ::= { syslogGroups 3} -- ------------------------------------------------------------- -- compliance statements -- ------------------------------------------------------------- syslogCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for for SNMP entities which implement the SYSLOG-MIB. " MODULE -- this module MANDATORY-GROUPS { syslogStatsGroup } GROUP syslogSystemGroup DESCRIPTION "The syslogSystemGroup group is mandatory only for agents which support monitoring and control of the syslog system wide parameters. If only monitoring is supported then the corresponding objects MUST have access read-only. " GROUP syslogParamsGroup DESCRIPTION "The syslogParamsGroup group is mandatory only for agents which support monitoring and/or control of syslog processes. If only monitoring is supported then the corresponding objects MUST have access read-only. " ::= { syslogCompliances 1 } END -- -- Copyright (C) The Internet Society (2005). This document is subject -- to the rights, licenses and restrictions contained in BCP 78, and -- except as set forth therein, the authors retain all their rights. -- -- This document and the information contained herein are provided on an -- "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE -- REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE -- INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR -- IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF -- THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED -- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -- Intellectual Property -- -- The IETF takes no position regarding the validity or scope of any -- Intellectual Property Rights or other rights that might be claimed -- to pertain to the implementation or use of the technology -- described in this document or the extent to which any license -- under such rights might or might not be available; nor does it -- represent that it has made any independent effort to identify any -- such rights. Information on the procedures with respect to -- rights in RFC documents can be found in BCP 78 and BCP 79. -- -- Copies of IPR disclosures made to the IETF Secretariat and any -- assurances of licenses to be made available, or the result of an -- attempt made to obtain a general license or permission for the use -- of such proprietary rights by implementers or users of this -- specification can be obtained from the IETF on-line IPR repository -- at http://www.ietf.org/ipr. -- -- The IETF invites any interested party to bring to its attention -- any copyrights, patents or patent applications, or other -- proprietary rights that may cover technology that may be required -- to implement this standard. Please address the information to the -- IETF at ietf-ipr@ietf.org. -- -- Acknowledgment -- -- Funding for the RFC Editor function is currently provided by the -- Internet Society. -- APPENDIX -- -- -- This section documents the development of the draft. It will be -- deleted when the draft bvecomes an RFC. -- -- Revision History: -- -- REVISION "200502160000Z" -- Wed February 16 00:00 GMT 2005 -- DESCRIPTION -- "Major editorial change -- - synched with latest mib boiler-plate requirement -- - synched with latest I-D requirements -- - references fixed -- Editorial nits fixed. -- " -- -- REVISION "200406160000Z" -- Mon Feb 16 00:00 GMT 2004 -- DESCRIPTION -- "Major change. -- The configuration parts have been removed. -- -- Updated the description clauses. -- -- Editorial nits fixed. -- " -- -- REVISION "200306250000Z" -- Wed June 25 00:00 GMT 2003 -- DESCRIPTION -- "Changed the type of -- syslogProcLastError SnmpAdminString, -- from Integer32. -- -- DEFVAL { 0 ] is added to syslogAllowedHostsMaskLen -- -- MO name changed from -- syslogCtlSelectionHostname to syslogCtlSelectionHostName -- -- Updated the description clauses. -- -- Fixed nits pointed out in Bert's mails of 20030319 and -- revised the document wrt the guidelines in -- draft-ietf-ops-mib-review-guidelines-01.txt -- -- Editorial nits fixed. -- " -- -- REVISION "200303030000Z" -- Mon March 03 00:00 GMT 2003 -- DESCRIPTION -- "Fixing of nits in descriptions, addition of references, -- addition of the following MOs -- syslogProcMsgsIllFormed Counter32, -- syslogProcStartTime TimeStamp, -- syslogProcLastError Integer32, -- syslogProcLastErrorTime TimeStamp, -- syslogParamsStorageType StorageType, -- syslogCtlFwdActionSrcAddrType InetAddressType, -- syslogCtlFwdActionSrcAddr InetAddress, -- added enumeration ''suspended(2)'' to -- syslogParamsProcessStatus. -- " -- -- REVISION "200212252343Z" -- Wed December 25 23:43 GMT 2002 -- DESCRIPTION -- "Radical revision of the MIB structure and design." -- -- REVISION "200206061841Z" -- Thu Jun 6 18:41 GMT 2002 -- DESCRIPTION -- "The initial version of this MIB module."