-- extracted from draft-ietf-ccamp-gmpls-ted-mib-01.txt
-- at Thu Mar  8 06:08:21 2007

   TED-MIB DEFINITIONS ::= BEGIN  
    
   IMPORTS 
      MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission, 
   IpAddress 
        FROM SNMPv2-SMI                            --[RFC2578] 
      MODULE-COMPLIANCE, OBJECT-GROUP 
        FROM SNMPv2-CONF                           --[RFC2580] 
      RowPointer        
        FROM SNMPv2-TC                             --[RFC2579] 
      ; 
    
   tedMIB MODULE-IDENTITY 
      LAST-UPDATED "200510240000Z"  -- 04 July 2005 00:00:00 GMT 
      ORGANIZATION "IETF CCAMP Working Group." 
      CONTACT-INFO 
         "          Tomohiro Otani 
                     otani@kddilabs.jp 
    
                     Masanori Miyazawa 
                     ma-miyazawa@kddilabs.jp 
    
                     Thomas D. Nadeau 
                     tnadeau@cisco.com 
    
                     Kenji Kumaki 
                     ke-kumaki@kddi.com 
    
                     Comments and discussion to ccamp@ietf.org" 
      DESCRIPTION 
           "This MIB contains managed object definitions for  
            TED in support of MPLS/GMPLS Traffic 
            Engienering (TE) Database. 
    
           Copyright (C) The Internet Society (2007).  This 
           version of this MIB module is part of RFCXXX; see 
           the RFC itself for full legal notices." 
     -- Revision history. 
      REVISION 
         "200506041200Z"  -- 04 July 2005 12:00:00 GMT 
      DESCRIPTION 
        "Initial version. Published as RFC xxxx."  
     -- RFC-editor pls fill in xxx 
      ::= { transmission xxx }  
     -- assigned by IANA, see section 7.1 for details 
    
   -- Textual Conventions. 
 
   -- Top level components of this MIB. 
    
   tedNotifications OBJECT IDENTIFIER ::= { tedMIB 0 } 
   tedObjects       OBJECT IDENTIFIER ::= { tedMIB 1 } 
   tedScalars       OBJECT IDENTIFIER ::= { tedObjects 1 } 
   tedTables        OBJECT IDENTIFIER ::= { tedObjects 2 } 
   tedConformance   OBJECT IDENTIFIER ::= { tedMIB 2 } 
    
   -- MIB Definitions 
    
   -- 
   -- Scalar Objects 
   -- 
    
    
   -- 
   --  TE DB Table 
   -- 
    
   tedTable OBJECT-TYPE  
   SYNTAX       SEQUENCE OF TedEntry  
   MAX-ACCESS   not-accessible  
   STATUS       current  
   DESCRIPTION  
        "This table indicates multiple TED information which has been 
   supported by [RFC3630]." 
   ::= { tedTables 1 }  
    
   tedEntry OBJECT-TYPE  
      SYNTAX       TedEntry  
      MAX-ACCESS   not-accessible  
      STATUS       current  
      DESCRIPTION  
      "This entry contains TED information commonly utilized in both 
   MPLS and GMPLS"  
      INDEX { teAreaId, teRouterId, teLinkStateId }  
   ::= { tedTable 1 }  
    
   TedEntry ::= SEQUENCE { 
      teAreaId                    Unsigned32, 
      teRouterId                  Unsigned32, 
      teLinkStateId               Unsigned32, 
      teLinkInformationSource     INTEGER, 
      teLinkInformationData       RowPointer, 
      teLinkType                  INTEGER, 
      teRouterIdAddr              IpAddress, 
      teLinkIdAddr                IpAddress, 
      teMetric                    Integer32, 
      teMaxBandwidth              OCTET STRING, 
      teMaxReservableBandwidth    OCTET STRING, 
      teUnreservedBandwidthPri0   OCTET STRING, 
      teUnreservedBandwidthPri1   OCTET STRING, 
      teUnreservedBandwidthPri2   OCTET STRING, 
      teUnreservedBandwidthPri3   OCTET STRING, 
      teUnreservedBandwidthPri4   OCTET STRING, 
      teUnreservedBandwidthPri5   OCTET STRING, 
      teUnreservedBandwidthPri6   OCTET STRING, 
      teUnreservedBandwidthPri7   OCTET STRING, 
      teAdministrativeGroup       Integer32, 
      teLocalId                   Integer32, 
      teRemoteId                  Integer32, 
      teLinkProtectionType        BITS 
       
   }  
    
   teAreaId OBJECT-TYPE 
       SYNTAX    Unsigned32 (1..4294967295) 
       MAX-ACCESS   not-accessible  
       STATUS       current  
       DESCRIPTION  
               "This object indicates the area identifier of the IGP. If 
   OSPF is used to advertise LSA, this represents an ospfArea. If ISIS 
   is used, this represents an area addres. Otherwise, this represents 
   zero." 
   ::= { tedEntry 1 }  
    
   teRouterId OBJECT-TYPE 
       SYNTAX Unsigned32 (1..4294967295) 
       MAX-ACCESS   not-accessible  
       STATUS       current  
       DESCRIPTION  
               "This object indicates the router identifier. If OSPF is 
   used to advertise LSA, this represents a Router ID. If ISIS is used, 
   this represents a System ID. Otherwise, this represents zero." 
   ::= { tedEntry 2 }  
    
   teLinkStateId OBJECT-TYPE 
       SYNTAX   Unsigned32 (1..4294967295) 
       MAX-ACCESS   not-accessible  
       STATUS       current  
       DESCRIPTION  
               "This object jndicates the link state identifier. If OSPF 
   is used, this represents an ospfLsdbID. If ISIS is used, this 
   represents an isisLSPID. Otherwise, this represents a unique 
   identifier within a node." 
   ::= { tedEntry 3 } 
 
   teLinkInformationSource OBJECT-TYPE 
         SYNTAX  INTEGER { 
                 unknown(0), 
                 locallyConfigured(1), 
                 ospf(2), 
                 isis(3), 
                 other(4) 
         } 
         MAX-ACCESS read-only 
         STATUS  current 
         DESCRIPTION 
             "This object indicates the source of the information about 
   the TE link" 
     ::= { tedEntry 4 } 
    
   teLinkInformationData OBJECT-TYPE 
       SYNTAX  RowPointer 
       MAX-ACCESS read-only 
       STATUS  current 
       DESCRIPTION 
           "This object cross-references the source of the information 
   about this TE link and should be interpretted in the context of 
   teLinkInformationSource. 
           If teLinkInformationSource has the value unknown(0), this 
   object SHOULD contain a value of zeroDotZero.If 
   teLinkInformationSource has the value locallyConfigured(1), this 
   object MAY contain the identifier of the corresponding row entry in 
   the teLinkTable of TE-LINK-STD-MIB,  the identifier of the 
   corresponding row in a local proprietary TE link MIB module, or the 
   value of zeroDotZero otherwise. 
           If teLinkInformationSource has the value ospf(2), this 
   object MAY contain the identifier of the corresponding row entry in 
   the ospfLocalLsdbTable of [OSPF-MIB], or the value of zeroDotZero 
   otherwise. 
           If teLinkInformationSource has the value isis(3) this object 
   MAY contain the identifier of the corresponding row entry in the 
   isisAreaAddr of [ISIS-MIB], or the value of zeroDotZero otherwise. 
           If teLinkInformationSource has the value other(4) this 
   object MAY contain the identifier of the corresponding row entry a 
   local proprietary MIB module, or the value of zeroDotZero otherwise." 
   ::= { tedEntry 5 } 
    
   teLinkType OBJECT-TYPE  
       SYNTAX    INTEGER {  
                           pointToPoint (1),  
                           multiAccess (2) 
                        } 
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
           "This indicates the type of the link such as point-to-point 
   or multi-access"  
   ::= { tedEntry 6 }  
    
   teRouterIdAddr OBJECT-TYPE 
       SYNTAX       IpAddress 
       MAX-ACCESS   read-only 
       STATUS       current 
       DESCRIPTION 
           " This object indicates the TE-Router ID " 
   ::= { tedEntry 7 } 
    
   teLinkIdAddr OBJECT-TYPE  
       SYNTAX       IpAddress  
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
               "This indicates the Router ID of the neighbor in the case 
   of point-to-point links.  This also indicates the interface address 
   of the designated router in the case of multi-access links."  
   ::= { tedEntry 8 }  
    
   teMetric OBJECT-TYPE  
       SYNTAX       Integer32  
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
           "This indicates the traffic engineering metric value of the 
   TE link."  
   ::= { tedEntry 9 }  
    
   teMaxBandwidth OBJECT-TYPE  
       SYNTAX       OCTET STRING (SIZE( 4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
           "This indicates the maximum bandwidth that 
      can be used on this link in this direction"  
   ::= { tedEntry 10 }  
    
   teMaxReservableBandwidth OBJECT-TYPE  
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
           "This indicates the maximum bandwidth that may be reserved on 
   this link in this direction"  
   ::= { tedEntry 11 }  
    
   teUnreservedBandwidthPri0 OBJECT-TYPE  
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
           "This indicates the amount of bandwidth not yet reserved at 
   the priority 0"  
   ::= { tedEntry 12 }  
    
   teUnreservedBandwidthPri1 OBJECT-TYPE  
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
           "This indicates the amount of bandwidth not yet reserved at 
   the priority 1"  
   ::= { tedEntry 13 } 
    
   teUnreservedBandwidthPri2 OBJECT-TYPE  
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
           "This indicates the amount of bandwidth not yet reserved at 
   the priority 2"  
   ::= { tedEntry 14 } 
    
   teUnreservedBandwidthPri3 OBJECT-TYPE  
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION 
           "This indicates the amount of bandwidth not yet reserved at 
   the priority 3"  
   ::= { tedEntry 15 } 
    
   teUnreservedBandwidthPri4 OBJECT-TYPE  
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
           "This indicates the amount of bandwidth not yet reserved at 
   the priority 4"  
   ::= { tedEntry 16 } 
    
   teUnreservedBandwidthPri5 OBJECT-TYPE  
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
           "This indicates the amount of bandwidth not yet reserved at 
   the priority 5"  
   ::= { tedEntry 17 } 
    
   teUnreservedBandwidthPri6 OBJECT-TYPE  
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
           "This indicates the amount of bandwidth not yet reserved at 
   the priority 6"  
   ::= { tedEntry 18 } 
    
   teUnreservedBandwidthPri7 OBJECT-TYPE  
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
           "This indicates the amount of bandwidth not yet reserved at 
   the priority 7"  
   ::= { tedEntry 19 } 
    
   teAdministrativeGroup OBJECT-TYPE  
       SYNTAX       Integer32 
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
           "This indicates the Administrative Group which the link 
   belong to.  Since the value is a bit mask, the link can belong to 
   multiple groups.  This is also called Resource Class/Color."  
   ::= { tedEntry 20 } 
    
   teLocalId OBJECT-TYPE  
       SYNTAX       Integer32  
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
           "This indicates the Link local identifier of an unnumbered 
   link." 
   ::= { tedEntry 21 } 
    
   teRemoteId OBJECT-TYPE  
       SYNTAX       Integer32  
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
           " This indicates the Link remote identifier of an unnumbered 
   link."  
   ::= { tedEntry 22 } 
    
   teLinkProtectionType OBJECT-TYPE 
       SYNTAX  BITS { 
               extraTraffic(0), 
               unprotected(1), 
               shared (2), 
               dedicatedOneToOne (3), 
               dedicatedOnePlusOne(4), 
               enhanced(5) 

       } 
       MAX-ACCESS read-only 
       STATUS  current 
       DESCRIPTION 
           "This object indicates the protection type of the TE link" 
   ::= { tedEntry 23 } 
 
 
   -- 
   --  TED Local Interface IP Address Table 
   -- 
    
   teLocalIntAddrTable OBJECT-TYPE 
       SYNTAX       SEQUENCE OF TeLocalIntAddrEntry  
       MAX-ACCESS   not-accessible  
       STATUS       current  
       DESCRIPTION  
           "This table contains the IP address information of a local TE 
   link."  
   ::= { tedTables 2 }       
    
   teLocalIntAddrEntry OBJECT-TYPE  
       SYNTAX       TeLocalIntAddrEntry  
       MAX-ACCESS   not-accessible  
       STATUS       current  
       DESCRIPTION  
           "This entry contains the IP address information of the local 
   TE link."  
       INDEX { teAreaId, teRouterId, teLinkStateId, 
   teLocalIntAddrIndex }  
   ::= { teLocalIntAddrTable 1 }  
    
   TeLocalIntAddrEntry ::= SEQUENCE { 
           teLocalIntAddrIndex Unsigned32, 
           teLocalIntAddr      IpAddress 
       }  
    
   teLocalIntAddrIndex OBJECT-TYPE  
       SYNTAX       Unsigned32 
       MAX-ACCESS   not-accessible  
       STATUS       current  
       DESCRIPTION  
       "This indicates the index to identify multiple local TE links"  
   ::= { teLocalIntAddrEntry 1 } 
    
   teLocalIntAddr OBJECT-TYPE  
       SYNTAX       IpAddress  
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
       "This object indicates the address of the local TE link."  
   ::= { teLocalIntAddrEntry 2 } 
   -- 
   --  TED Remote Interface IP Address Table 
   -- 
    
   teRemoteIntAddrTable OBJECT-TYPE 
       SYNTAX       SEQUENCE OF TeRemoteIntAddrEntry  
       MAX-ACCESS   not-accessible  
       STATUS       current  
       DESCRIPTION  
           "This table contains the IP address information of a remote 
   TE link."  
   ::= { tedTables 3 }       
    
   teRemoteIntAddrEntry OBJECT-TYPE  
       SYNTAX       TeRemoteIntAddrEntry  
       MAX-ACCESS   not-accessible  
       STATUS       current  
       DESCRIPTION  
           "This entry contains the IP address information of the remote 
   TE link."  
   INDEX { teAreaId, teRouterId, teLinkStateId, teRemoteIntAddrIndex }  
       ::= { teRemoteIntAddrTable 1 }  
    
   TeRemoteIntAddrEntry ::= SEQUENCE {  
       teRemoteIntAddrIndex Unsigned32, 
       teRemoteIntAddr      IpAddress 
   }  
    
   teRemoteIntAddrIndex OBJECT-TYPE  
       SYNTAX       Unsigned32 
       MAX-ACCESS   not-accessible 
       STATUS       current  
       DESCRIPTION  
           "This indicates the index to identify multiple remote TE 
   links."  
   ::= { teRemoteIntAddrEntry 1 } 
    
   teRemoteIntAddr OBJECT-TYPE  
       SYNTAX       IpAddress 
       MAX-ACCESS   read-only 
       STATUS       current  
       DESCRIPTION  
           "This object indicates the address of the remote TE link."  
   ::= { teRemoteIntAddrEntry 2 } 
    
    
   -- 
   --  TED Switch Capable Table 
   -- 
    
   teSwCapTable OBJECT-TYPE  
       SYNTAX       SEQUENCE OF TeSwCapEntry  
       MAX-ACCESS   not-accessible  
       STATUS       current  
       DESCRIPTION  
           "This table contains the GMPLS TED switching capability 
   information." 
   ::= { tedTables 4 }  
    
   teSwCapEntry OBJECT-TYPE  
       SYNTAX       TeSwCapEntry  
       MAX-ACCESS   not-accessible  
       STATUS       current  
       DESCRIPTION  
           "This entry relates each TE link with its GMPLS TE switching 
   capability information. IF the MIB deals with only OSPF-TE 
   information, the value of each object related with GMPLS TE 
   extensions should be null." 
       INDEX { teAreaId, teRouterId, teLinkStateId, teSwCapIndex }  
   ::= { teSwCapTable 1 }  
      
   TeSwCapEntry ::= SEQUENCE { 
       teSwCapIndex            Unsigned32, 
       teSwitchingType         INTEGER, 
       teEncoding              INTEGER, 
       teMaxLspBandwidthPri0   OCTET STRING, 
       teMaxLspBandwidthPri1   OCTET STRING, 
       teMaxLspBandwidthPri2   OCTET STRING, 
       teMaxLspBandwidthPri3   OCTET STRING, 
       teMaxLspBandwidthPri4   OCTET STRING, 
       teMaxLspBandwidthPri5   OCTET STRING, 
       teMaxLspBandwidthPri6   OCTET STRING, 
       teMaxLspBandwidthPri7   OCTET STRING, 
       teMinLspBandwidth       OCTET STRING, 
       teIntMtu                Integer32, 
       teIndication            INTEGER 
   }  
    
   teSwCapIndex OBJECT-TYPE  
       SYNTAX       Unsigned32 
       MAX-ACCESS   not-accessible  
       STATUS       current  
       DESCRIPTION  
           "This index is utilized to identify multiple switching 
   functions on a local or remote TE link."  
   ::= { teSwCapEntry 1 } 
    
   teSwitchingType OBJECT-TYPE 
      SYNTAX  INTEGER { 
                 unknown (0), 
                 psc1    (1), 
                 psc2    (2), 
                 psc3    (3), 
                 psc4    (4), 
                 l2sc   (51), 
                 tdm   (100), 
                 lsc   (150), 
                 fsc   (200) 

           } 
           MAX-ACCESS read-only 
           STATUS  current 
           DESCRIPTION 
               "This object indicates the GMPLS switching capability 
   assigned to the TE link." 
           ::= { teSwCapEntry 2 } 
    
   teEncoding OBJECT-TYPE 
           SYNTAX  INTEGER { 
                 packet         (1), 
                 ethernet       (2), 
                 ansiEtsiPdh    (3), 
                 sdhSonet       (5), 
                 digitalWrapper (7), 
                 lambda         (8), 
                 fiber          (9), 
                 fiberChannel  (11) 
               } 
       MAX-ACCESS read-only 
       STATUS  current 
       DESCRIPTION 
           "This object indicates the GMPLS encoding type assigned to 
   the TE link." 
   ::= { teSwCapEntry 3 } 
    
   teMaxLspBandwidthPri0 OBJECT-TYPE 
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only 
       STATUS       current 
       DESCRIPTION 
           "This object indicates the maximum bandwidth of the TE link 
   at the priority 0 for GMPLS LSP creation." 
   ::= { teSwCapEntry 4 } 
    
   teMaxLspBandwidthPri1 OBJECT-TYPE 
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only 
       STATUS       current 
       DESCRIPTION 
           "This object indicates the maximum bandwidth of the TE link 
   at the priority 1 for GMPLS LSP creation." 
   ::= { teSwCapEntry 5 } 
    
   teMaxLspBandwidthPri2  OBJECT-TYPE 
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only 
       STATUS       current 
       DESCRIPTION 
           "This object indicates the maximum bandwidth of the TE link 
   at the priority 2 for GMPLS LSP creation." 
   ::= { teSwCapEntry 6 } 
    
   teMaxLspBandwidthPri3 OBJECT-TYPE 
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only 
       STATUS       current 
       DESCRIPTION 
           "This object indicates the maximum bandwidth of the TE link 
   at the priority 3 for GMPLS LSP creation." 
   ::= { teSwCapEntry 7 } 
    
   teMaxLspBandwidthPri4 OBJECT-TYPE 
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only 
       STATUS       current 
       DESCRIPTION 
           "This object indicates the maximum bandwidth of the TE link 
   at the priority 4 for GMPLS LSP creation." 
   ::= { teSwCapEntry 8 } 
    
   teMaxLspBandwidthPri5  OBJECT-TYPE 
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
    
       MAX-ACCESS   read-only 
       STATUS       current 
       DESCRIPTION 
           "This object indicates the maximum bandwidth of the TE link 
   at the priority 5 for GMPLS LSP creation." 
   ::= { teSwCapEntry 9 } 
        
   teMaxLspBandwidthPri6 OBJECT-TYPE 
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only 
       STATUS       current 
       DESCRIPTION 
           "This object indicates the maximum bandwidth of the TE link 
   at the priority 6 for GMPLS LSP creation." 
   ::= { teSwCapEntry 10 } 
    
   teMaxLspBandwidthPri7 OBJECT-TYPE 
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only 
       STATUS       current 
       DESCRIPTION 
           "This object indicates the maximum bandwidth of the TE link 
   at the priority 7 for GMPLS LSP creation." 
   ::= { teSwCapEntry 11 } 
    
   teMinLspBandwidth OBJECT-TYPE 
       SYNTAX       OCTET STRING (SIZE (4)) 
       UNITS        "Byte per seconds" 
       MAX-ACCESS   read-only 
       STATUS       current 
       DESCRIPTION 
           "This object indicates the minimum bandwidth of the TE link 
   for GMPLS LSP creation if the switching capability field is TDM, PSC-
   1, PSC-2, PSC-3, or PSC-4." 
   ::= { teSwCapEntry 12 } 
    
   teIntMtu OBJECT-TYPE 
       SYNTAX       Integer32 
       MAX-ACCESS   read-only 
       STATUS       current 
       DESCRIPTION 
           "This object indicates the MTU of the local or remote TE 
   link" 
   ::= { teSwCapEntry 13 } 
    
   teIndication OBJECT-TYPE 
       SYNTAX       INTEGER { 
                      standard (0), 
                      arbitrary (1) 
                      } 
       MAX-ACCESS   read-only 
       STATUS       current 
       DESCRIPTION 
           "This object indicates whether the interface supports 
   Standard or Arbitrary SONET/SDH." 
   ::= { teSwCapEntry 14 } 
    
   -- 
   --  TED SRLG Table 
   -- 
    
   teSrlgTable OBJECT-TYPE 
       SYNTAX       SEQUENCE OF TeSrlgEntry  
       MAX-ACCESS   not-accessible  
       STATUS       current  
       DESCRIPTION  
           "This table contains the SRLG information of the TE link."  
   ::= { tedTables 5 }       
    
   teSrlgEntry OBJECT-TYPE  
       SYNTAX       TeSrlgEntry  
       MAX-ACCESS   not-accessible  
       STATUS       current  
       DESCRIPTION  
           "This entry relates each TE link with its SRLG information."  
       INDEX { teAreaId, teRouterId, teLinkStateId, teSrlgIndex }  
   ::= { teSrlgTable 1 }  
    
   TeSrlgEntry ::= SEQUENCE { 
       teSrlgIndex Unsigned32, 
       teSrlg      Integer32 
       }  
    
   teSrlgIndex OBJECT-TYPE  
       SYNTAX       Unsigned32 
       MAX-ACCESS   not-accessible  
       STATUS       current  
       DESCRIPTION  
           "This index is utilized to identify multiple SRLG values on a 
   local or remote TE link."  
   ::= { teSrlgEntry 1 } 
    
   teSrlg OBJECT-TYPE  
       SYNTAX       Integer32  
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
           "This object indicate the SRLG value assigned to a local or 
   remote TE link"  
   ::= { teSrlgEntry 2 } 
    
   -- Conformance Statement 
   tedGroups 
         OBJECT IDENTIFIER ::= { tedConformance 1 } 
    
   tedCompliances 
         OBJECT IDENTIFIER ::= { tedConformance 2 } 
    
   -- Module Compliance 
    
   teModuleFullCompliance MODULE-COMPLIANCE 
         STATUS current 
         DESCRIPTION 
            "Compliance statement for agents provides full support  
             for the TED MIB" 
         MODULE -- this module 
            MANDATORY-GROUPS    { tedMainGroup 
                                } 
    
      ::= { tedCompliances 1 } 
    
   -- 
   -- ReadOnly Compliance 
   -- 
    
   teModuleReadOnlyCompliance MODULE-COMPLIANCE 
         STATUS current 
         DESCRIPTION  
           "Compliance requirement for implementations only provide 
           read-only support for TED. Such devices can then be monitored 
           but cannot be configured using this MIB module. 
           " 
         MODULE -- this module 
            MANDATORY-GROUPS    { tedMainGroup 
                                } 
    
      ::= { tedCompliances 2 } 
    
    
      -- Units of conformance. 
      tedMainGroup OBJECT-GROUP 
         OBJECTS {  
               teLinkInformationSource     , 
               teLinkType                  , 
               teRouterIdAddr              , 
               teLinkIdAddr                , 
               teMetric                    , 
               teMaxBandwidth              , 
               teMaxReservableBandwidth    , 
               teUnreservedBandwidthPri0   , 
               teUnreservedBandwidthPri1   , 
               teUnreservedBandwidthPri2   , 
               teUnreservedBandwidthPri3   , 
               teUnreservedBandwidthPri4   , 
               teUnreservedBandwidthPri5   , 
               teUnreservedBandwidthPri6   , 
               teUnreservedBandwidthPri7   , 
               teAdministrativeGroup       , 
               teLocalId                   , 
               teRemoteId                  , 
               teLinkProtectionType        , 
               teLinkInformationData       , 
               teLocalIntAddr              , 
               teRemoteIntAddr             , 
               teSwitchingType             , 
               teEncoding                  , 
               teMaxLspBandwidthPri0       , 
               teMaxLspBandwidthPri1       , 
               teMaxLspBandwidthPri2       , 
               teMaxLspBandwidthPri3       , 
               teMaxLspBandwidthPri4       , 
               teMaxLspBandwidthPri5       , 
               teMaxLspBandwidthPri6       , 
               teMaxLspBandwidthPri7       , 
               teMinLspBandwidth           , 
               teIntMtu                    , 
               teIndication                , 
               teSrlg 
              } 
         STATUS  current 
         DESCRIPTION 
                "Collection of objects for TED management" 
       ::= { tedGroups 1 } 
    
   END 

--     
--    Copyright (C) The IETF Trust (2007).  
--     
--    This document is subject to the rights, licenses and restrictions 
--    contained in BCP 78, and except as set forth therein, the authors 
--    retain all their rights. 
--     
--    This document and the information contained herein are provided on an 
--    "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS 
--    OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND 
--    THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS 
--    OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF 
--    THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED 
--    WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.