-- extracted from rfc4498.txt -- at Tue May 23 06:06:19 2006 TIME-AGGREGATE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, experimental, OBJECT-TYPE, Opaque, Integer32 FROM SNMPv2-SMI OwnerString FROM RMON-MIB RowStatus, StorageType, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB; tAggrMIB MODULE-IDENTITY LAST-UPDATED "200604270000Z" -- 27 April 2006 ORGANIZATION "Cyber Solutions Inc. NetMan Working Group" CONTACT-INFO " Glenn Mansfield Keeni Postal: Cyber Solutions Inc. 6-6-3, Minami Yoshinari Aoba-ku, Sendai, Japan 989-3204. Tel: +81-22-303-4012 Fax: +81-22-303-4015 E-mail: glenn@cysols.com Support Group E-mail: mibsupport@cysols.com" DESCRIPTION "The MIB for servicing Time-Based aggregate objects. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4498; see the RFC itself for full legal notices. " REVISION "200604270000Z" -- 27th April, 2006 DESCRIPTION "Initial version, published as RFC 4498." ::= { experimental 124 } TAggrMOErrorStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type is used to model the error status of the sampled MO instance. The error status for a sampled MO instance is given in terms of two elements: o The moIndex, which indicates the sample number of the MO instance (starting at 1) in the value of the time- aggregated MO instance. o The moError, which indicates the error that was encountered in sampling that MO instance. The syntax in ASN.1 Notation will be ErrorStatus :: = SEQUENCE { moIndex Integer32, moError SnmpPduErrorStatus } TAggrMOErrorStatus ::= SEQUENCE OF { ErrorStatus } Note1: The command responder will supply values for all the samples of the MO instance. If an error is encountered for a sample, then the corresponding value will have an ASN.1 value NULL, and an error will be flagged in the corresponding TAggrMOErrorStatus object. Only MOs for which errors have been encountered will the corresponding moIndex and moError values be set. Note2: The error code for the component MO instances will be in accordance with the SnmpPduErrorStatus TC defined in the DISMAN-SCHEDULE-MIB[RFC3231]. " SYNTAX Opaque (SIZE (0..1024)) TimeAggrMOValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type is used to model the time-aggregated MOs. It will be a sequence of values. The syntax in ASN.1 Notation will be MOSampleValue :: = SEQUENCE { value ObjectSyntax } TimeAggrMOValue ::= SEQUENCE OF { MOSampleValue } where the first MOSampleValue, if any, will always be the timestamp of the first sample in the aggregated object. The subsequent values are the values of the MO instance sampled at the specified intervals for the specified number of times. Note: The command generator will need to know the constituent MO instance and the sampling interval to correctly interpret TimeAggrMOValue. " SYNTAX Opaque (SIZE (0..1024)) CompressedTimeAggrMOValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type is used to model the compressed TAgMOs." SYNTAX Opaque (SIZE (0..1024)) -- -- The Time-Based aggregation control table -- tAggrCtlTable OBJECT-TYPE SYNTAX SEQUENCE OF TAggrCtlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Time-Based aggregation control table. It controls the aggregation of the samples of MO instances. There will be a row for each TAgMO. " ::= {tAggrMIB 1} tAggrCtlEntry OBJECT-TYPE SYNTAX TAggrCtlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of the control table that defines one Time-Based aggregate MO (TAgMO)." INDEX {tAggrCtlEntryID } ::= {tAggrCtlTable 1 } TAggrCtlEntry ::= SEQUENCE { tAggrCtlEntryID SnmpAdminString, tAggrCtlMOInstance OBJECT IDENTIFIER, tAggrCtlAgMODescr SnmpAdminString, tAggrCtlInterval Integer32, tAggrCtlSamples Integer32, tAggrCtlCompressionAlgorithm INTEGER, tAggrCtlEntryOwner OwnerString, tAggrCtlEntryStorageType StorageType, tAggrCtlEntryStatus RowStatus } tAggrCtlEntryID OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A locally unique, administratively assigned name for this aggregated MO. It is used as an index to uniquely identify this row in the table." ::= { tAggrCtlEntry 1 } tAggrCtlMOInstance OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS current DESCRIPTION "The sampled values of this MO instance will be aggregated by the TAgMO. " ::= { tAggrCtlEntry 2 } tAggrCtlAgMODescr OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "A textual description of the aggregate object." ::= {tAggrCtlEntry 3} tAggrCtlInterval OBJECT-TYPE SYNTAX Integer32 UNITS "micro seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The interval, in microseconds, at which the MO instance pointed at by tAggrInstance will be sampled for Time-Based aggregation. " ::= {tAggrCtlEntry 4} tAggrCtlSamples OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The number of times at which the MO instance referred to by tAggrInstance will be sampled for Time-Based aggregation." ::= {tAggrCtlEntry 5} -- only one compression algorithm is defined as of now. tAggrCtlCompressionAlgorithm OBJECT-TYPE SYNTAX INTEGER { none (1), deflate (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The compression algorithm that will be used by the agent to compress the value of the TAgMO. The deflate algorithm and corresponding data format specification is described in RFC 1951. It is compatible with the widely used gzip utility. " REFERENCE "RFC1951 : DEFLATE Compressed Data Format Specification version 1.3 " DEFVAL { none } ::= {tAggrCtlEntry 6} tAggrCtlEntryOwner OBJECT-TYPE SYNTAX OwnerString MAX-ACCESS read-create STATUS current DESCRIPTION "A textual description of the entity that created this entry. " ::= {tAggrCtlEntry 7} tAggrCtlEntryStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines whether the parameters defined in this row are kept in volatile storage and lost upon reboot or backed up by non-volatile (permanent) storage. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. " ::= {tAggrCtlEntry 8} tAggrCtlEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions. Objects in a row can be modified only when the value of this object in the corresponding conceptual row is not 'active'. Thus, to modify one or more of the objects in this conceptual row, a. change the row status to 'notInService', b. change the values of the row, and c. change the row status to 'active'. The tAggrCtlEntryStatus may be changed to 'active' iff all the MOs in the conceptual row have been assigned valid values. " ::= {tAggrCtlEntry 9} -- -- tAggrDataTable: The data table. -- tAggrDataTable OBJECT-TYPE SYNTAX SEQUENCE OF TAggrDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the data table. Each row of this table contains information about a TAgMO indexed by tAggrCtlEntryID. tAggrCtlEntryID is the key to the table. It is used to identify instances of the TAgMO that are present in the table. " ::= {tAggrMIB 2} tAggrDataEntry OBJECT-TYPE SYNTAX TAggrDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information pertaining to a TAgMO." INDEX {tAggrCtlEntryID} ::= {tAggrDataTable 1 } TAggrDataEntry ::= SEQUENCE { tAggrDataRecord TimeAggrMOValue, tAggrDataRecordCompressed CompressedTimeAggrMOValue, tAggrDataErrorRecord TAggrMOErrorStatus } tAggrDataRecord OBJECT-TYPE SYNTAX TimeAggrMOValue MAX-ACCESS read-only STATUS current DESCRIPTION "The snapshot value of the TAgMO." ::= { tAggrDataEntry 1} tAggrDataRecordCompressed OBJECT-TYPE SYNTAX CompressedTimeAggrMOValue MAX-ACCESS read-only STATUS current DESCRIPTION "The compressed value of the TAgMO. The compression algorithm will depend on the tAggrCtlCompressionAlgorithm given in the corresponding tAggrCtlEntry. If the value of the corresponding tAggrCtlCompressionAlgorithm is (1) 'none', then the value of all instances of this object will be a string of zero length. Note that the access privileges to this object will be governed by the access privileges of the corresponding MO instance. Thus, an entity attempting to access an instance of this MO MUST have access rights to the instance object pointed at by tAggrCtlMOInstance and this MO instance. " ::= { tAggrDataEntry 2} tAggrDataErrorRecord OBJECT-TYPE SYNTAX TAggrMOErrorStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The error status corresponding to the MO instance samples aggregated in tAggrDataRecord (and tAggrDataRecordCompressed)." ::= { tAggrDataEntry 3} -- Conformance information tAggrConformance OBJECT IDENTIFIER ::= { tAggrMIB 3 } tAggrGroups OBJECT IDENTIFIER ::= { tAggrConformance 1 } tAggrCompliances OBJECT IDENTIFIER ::= { tAggrConformance 2 } -- Compliance statements tAggrMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the TIME-AGGREGATE-MIB." MODULE -- this module MANDATORY-GROUPS { tAggrMibBasicGroup } ::= { tAggrCompliances 1 } -- Units of conformance tAggrMibBasicGroup OBJECT-GROUP OBJECTS { tAggrCtlMOInstance, tAggrCtlAgMODescr, tAggrCtlInterval, tAggrCtlSamples, tAggrCtlCompressionAlgorithm, tAggrCtlEntryOwner, tAggrCtlEntryStorageType, tAggrCtlEntryStatus, tAggrDataRecord, tAggrDataRecordCompressed, tAggrDataErrorRecord } STATUS current DESCRIPTION "A collection of objects for Time-Based aggregation of MOs." ::= { tAggrGroups 1 } END -- -- Copyright (C) The Internet Society (2006). -- -- This document is subject to the rights, licenses and restrictions -- contained in BCP 78 and at www.rfc-editor.org/copyright.html, and -- except as set forth therein, the authors retain all their rights. -- -- This document and the information contained herein are provided on an -- "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS -- OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET -- ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, -- INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE -- INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED -- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -- -- Intellectual Property -- -- The IETF takes no position regarding the validity or scope of any -- Intellectual Property Rights or other rights that might be claimed to -- pertain to the implementation or use of the technology described in -- this document or the extent to which any license under such rights -- might or might not be available; nor does it represent that it has -- made any independent effort to identify any such rights. Information -- on the procedures with respect to rights in RFC documents can be -- found in BCP 78 and BCP 79. -- -- Copies of IPR disclosures made to the IETF Secretariat and any -- assurances of licenses to be made available, or the result of an -- attempt made to obtain a general license or permission for the use of -- such proprietary rights by implementers or users of this -- specification can be obtained from the IETF on-line IPR repository at -- http://www.ietf.org/ipr. -- -- The IETF invites any interested party to bring to its attention any -- copyrights, patents or patent applications, or other proprietary -- rights that may cover technology that may be required to implement -- this standard. Please address the information to the IETF at -- ietf-ipr@ietf.org. --