-- extracted from draft-ietf-rmonmib-tpm-mib-11.txt -- at Fri May 14 06:21:14 2004 TPM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32 FROM SNMPv2-SMI --[RFC2578] MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF --[STD58] SnmpAdminString FROM SNMP-FRAMEWORK-MIB --[RFC2571] RowStatus, TEXTUAL-CONVENTION, TimeStamp, StorageType FROM SNMPv2-TC --[RFC1903] rmon, OwnerString FROM RMON-MIB --[STD59] protocolDirLocalIndex, ZeroBasedCounter32 FROM RMON2-MIB --[RFC2021] ZeroBasedCounter64 FROM HCNUM-TC --[RFC2856] AppLocalIndex, TransactionAggregationType, ClientID, DataSourceOrZero, apmAppDirAppLocalIndex, apmExceptionIndex, apmAppDirResponsivenessType FROM APM-MIB --[RFCXXX1] SspmClockSource, SspmClockMaxSkew, SspmMicroSeconds FROM SSPM-MIB --[RFCXXX2]; -- Transaction Performance Monitoring MIB tpmMIB MODULE-IDENTITY LAST-UPDATED "200310071500Z" -- 07 October 2003 ORGANIZATION "IETF RMON MIB Working Group" CONTACT-INFO "E-mail: rmonmib@ietf.org Subscribe: rmonmib-request@ietf.org w/ msg body: subscribe rmonmib Russell Dietz Hifn, Inc. Postal: 750 University Ave Los Gatos, CA 95032-7695 USA Tel: +1 408 399-3623 Fax: +1 408 399-3501 E-mail: rdietz@hifn.com Robert G. Cole AT&T Labs Postal: 330 Saint Johns Street 2nd Floor Havre de Grace, MD 21078 USA Tel: +1 410 939-8732 Fax: +1 410 939-7034 E-mail: rgcole@att.com" DESCRIPTION "This module defines extensions to the RMON2-MIB module for the collection of Performance Metrics related to application traffic in a network. In particular, it describes managed objects used for monitoring selectable performance metrics and statistics derived from the monitoring of network packets and transport protocol states. In order to maintain the RMON 'look-and-feel', some of the text from the RMON2 [RFC2021] and HC-RMON [RFC3273] MIBs by Steve Waldbusser have been used in this MIB module. Copyright (C) The Internet Society (year). This version of this MIB module is part of RFC xxxx; see the RFC itself for full legal notices." REVISION "200310071500Z" -- 07 October 2003 DESCRIPTION "The original version of this MIB module, published as RFCXXXX." -- RFC-Editor assigns XXXX ::= { rmon 30 } -- this has NOT been assigned -- -- Object Identifier Assignments -- tpmCapabilities OBJECT IDENTIFIER ::= { tpmMIB 1 } tpmReports OBJECT IDENTIFIER ::= { tpmMIB 2 } tpmConformance OBJECT IDENTIFIER ::= { tpmMIB 3 } -- tpmAggrReportCntrlTable OBJECT IDENTIFIER ::= { tpmReports 1 } -- tpmAggrReportTable OBJECT IDENTIFIER ::= { tpmReports 2 } -- tpmCurReportTable OBJECT IDENTIFIER ::= { tpmReports 3 } -- tpmCurReportSize OBJECT IDENTIFIER ::= { tpmReports 4 } -- tpmExcpReportTable OBJECT IDENTIFIER ::= { tpmReports 5 } -- -- Textual Conventions -- TpmTransactionMetricIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An index used to uniquely identify an entry in the tpmTransMetricDir table. Each such entry defines the protocol transaction and metric instance to be monitored for a specific application." SYNTAX Unsigned32 (1..65535) TpmMetricDefID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An index that identifies through reference to a specific performance metric. The metrics are referenced through their type (connect, delay, loss, etc.), their directional characteristics (one-way, round trip, etc.), their name, their reference to a documented definition." SYNTAX Unsigned32 (1..2147483647) -- -- The tpmCapabilitiesGroup -- tpmClockResolution OBJECT-TYPE SYNTAX SspmMicroSeconds MAX-ACCESS read-only STATUS current -- UNITS Microseconds DESCRIPTION "A read only variable indicating the resolution of the measurements possible by this device." ::= { tpmCapabilities 1 } tpmClockMaxSkew OBJECT-TYPE SYNTAX SspmClockMaxSkew MAX-ACCESS read-only STATUS current -- UNITS Seconds DESCRIPTION "A read only variable indicating the maximum offset error due to skew of the local clock over the time interval 86400 seconds, in seconds." ::= { tpmCapabilities 2 } tpmClockSource OBJECT-TYPE SYNTAX SspmClockSource MAX-ACCESS read-only STATUS current DESCRIPTION "A read only variable indicating the source of the clock. This is provided to allow a user to determine how accurate the timing mechanism is compared with other devices." ::= { tpmCapabilities 3 } tpmTransMetricDirLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the tpmTransMetricDirTable was last modified, through modifications of the tpmTransMetricDirConfig object." ::= { tpmCapabilities 4 } tpmTransMetricDirTable OBJECT-TYPE SYNTAX SEQUENCE OF TpmTransMetricDirEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to describe and link sets of performance metrics and protocols to an entry in the application directory. This table, with the tpmMetricDefTable, describes the capability of the agent to collection sub-application level data related to each entry in the apmAppDirectoryTable. This table lists the protocol transactions and their corresponding performance metrics that this agent has the capability to compute and collect, for the specified application. There is one entry in this table for each such application, protocol transaction and metric combination supported by this agent. The entries in this table represent the metrics that are collected for each protocol transaction that comprise the application. The agent should boot up with this table pre-configured with those combinations of applications, protocol transactions and metrics that it knows about and wishes to monitor. Implementations must populate the table with all possible application, protocol transaction and metric combinations and have the default configuration objects set to supportedOff(2). This table does not support the creation of new combinations by the management application. The deletion of an entry in the apmAppDirectoryTable will cause the removal of entries from this table. These entries must be removed because the appLocalIndex value will no longer be visible in the apmAppDirectoryTable. When an entry is created in the apmAppDirectoryTable and the agent has the ability to support metrics for these protocol transactions, the appropriate entries must be made in the tpmTransMetricDefTable." ::= { tpmCapabilities 5 } tpmTransMetricDirEntry OBJECT-TYPE SYNTAX TpmTransMetricDirEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the tpmTransMetricDirTable. An example of the indexing of this entry is tpmTransMetricDirConfig.5.2 where 5 is the value of a valid and visible appLocalIndex object in in the appLocalDir table. The entries describe the the transaction and metric pairs monitored for this application. The tpmTransMetricProtocolIndex identifies the protocol transaction and the tpmMetricDefIndex describes the metric monitored." INDEX { tpmTransMetricAppLocalIndex, -- Application Index tpmTransMetricIndex -- (Protocol,Metric) Index } ::= { tpmTransMetricDirTable 1 } TpmTransMetricDirEntry ::= SEQUENCE { tpmTransMetricAppLocalIndex AppLocalIndex, tpmTransMetricIndex TpmTransactionMetricIndex, tpmTransMetricProtocolIndex Unsigned32, tpmTransMetricMetricIndex Unsigned32, tpmTransMetricDirConfig INTEGER } tpmTransMetricAppLocalIndex OBJECT-TYPE SYNTAX AppLocalIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index used to uniquely identify the application which the entries in the tpmTransMetricDir table are associated." ::= { tpmTransMetricDirEntry 1 } tpmTransMetricIndex OBJECT-TYPE SYNTAX TpmTransactionMetricIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index used to uniquely identify an entry in the tpmTransMetricDir table. Each such entry defines protocol transaction and metric instance to be monitored for a specific application." ::= { tpmTransMetricDirEntry 2 } tpmTransMetricProtocolIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The protocolDirLocalIndex of the particular transaction to be analyzed when computing and generating the selected metric for a specific application." ::= { tpmTransMetricDirEntry 3 } tpmTransMetricMetricIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The tpmMetricDefinitionID of the particular metric to be generated." ::= { tpmTransMetricDirEntry 4 } tpmTransMetricDirConfig OBJECT-TYPE SYNTAX INTEGER { notSupported(1), supportedOff(2), supportedOn(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes and configures the probe's support for this performance metric in relationship to the specified transaction and application. The agent creates entries in this table for all metric and transaction combinations that it can generate. Because the probe will only populate this table with supported entries, and the table cannot have entries added, the notSupported(1) setting is only used to signify that other configuration parameters are causing the agent to currently not support the generation and collection of this metric for the specified protocol and application. Also, the status of this object will not change to notSupported(1) due to a change to supportedOff(2) in the tpmMetricDir table. If the value of this object is notSupported(1), the probe will not perform computations for this performance metric and transaction combination and shall not allow this object to be changed to any other value. If the value of this object is supportedOn(3), the probe supports computations for this performance metric and protocol and is configured to perform the computations for this performance metric and protocol combination for the application for all interfaces. If the value of this object is supportedOff(2), the probe supports computations for this performance metric for the specified protocol, but is configured to not perform the computations for this performance metric and protocol for the application for any interfaces. Whenever this value changes from supportedOn(3) to supportedOff(2), the probe shall cause the deletion of all entries in the tpmReportGroup tables, for all appropriate studies configured in the tpmAggrReportCntrlTable. The value of this object must persist across reboots." ::= { tpmTransMetricDirEntry 5 } -- -- TPM Metric Definitions Table -- tpmMetricDefTable OBJECT-TYPE SYNTAX SEQUENCE OF TpmMetricDefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tpmMetricDefTable describes the metrics available to the TPM-MIB. The tpmMetricDefTable defines metrics by referencing existing IETF, ITU and other standards organizations' documents. This table contains one row per metric supported by this agent, and should be populated during system initialization." ::= { tpmCapabilities 6 } tpmMetricDefEntry OBJECT-TYPE SYNTAX TpmMetricDefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular metric." INDEX { tpmMetricDefinitionID } ::= { tpmMetricDefTable 1 } TpmMetricDefEntry ::= SEQUENCE { tpmMetricDefinitionID TpmMetricDefID, tpmMetricDefType INTEGER, tpmMetricDefDirType INTEGER, tpmMetricDefName SnmpAdminString, tpmMetricDefReference SnmpAdminString, tpmMetricDefGlobalID OBJECT IDENTIFIER } tpmMetricDefinitionID OBJECT-TYPE SYNTAX TpmMetricDefID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for this entry. This object identifies the the particular metric in this MIB module." ::= { tpmMetricDefEntry 1 } tpmMetricDefType OBJECT-TYPE SYNTAX INTEGER { other(1), connectMetric(2), delayMetric(3), lossMetric(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The basic type of metric indicated by this entry. The value 'other(1)' indicates that this metric cannot be characterized by any of the remaining enumerations specified for this object. The value 'connectMetric(2)' indicates that this metric measures connectivity characteristics. The value 'delayMetric(3)' indicates that this metric measures delay characteristics. The value 'lossMetric(4)' indicates that this metric measures loss characteristics." ::= { tpmMetricDefEntry 2 } tpmMetricDefDirType OBJECT-TYPE SYNTAX INTEGER { oneWay(1), twoWay(2), multiWay(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The directional characteristics of the this metric. The value 'oneWay(1)' indicates that this metric is measured with some sort of unidirectional test. The value 'twoWay(2)' indicates that this metric is measured with some sort of bidirectional test. The value 'multiWay(3)' indicates that this metric is measured with some combination of unidirectional and/or bidirectional tests." ::= { tpmMetricDefEntry 3 } tpmMetricDefName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The textual name of this metric. For example, if this tpmMetricDefEntry identified the IPPM metric for round trip delay, then this object should contain the value, e.g., 'Type-P-Round-Trip-Delay'." ::= { tpmMetricDefEntry 4 } tpmMetricDefReference OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains a reference to the document which defines this metric. If this document is available online via electronic download, then a URL should be specified in this object. For example, if this tpmMetricDefEntry identified the IPPM metric 'Type-P-Round-Trip-Delay', then this object should contain the value, e.g., 'http://www.ietf.org/rfc/rfc2681.txt'." ::= { tpmMetricDefEntry 5 } tpmMetricDefGlobalID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains a reference to the Object ID in a metrics registration MIB being developed in the IPPM WG at the IETF, e.g., the IPPM-REGISTRY-MIB, which defines the metric. In the event that this metric has no corresponding OID or until the IPPM-REGISTRY-MIB is defined, then the value should be set to 0.0 for none." ::= { tpmMetricDefEntry 6 } -- -- The tpmAggregateReportsGroup -- tpmAggrReportCntrlTable OBJECT-TYPE SYNTAX SEQUENCE OF TpmAggrReportCntrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tpmAggrReportCntrlTable is the controlling entry to manage the population of studies in the Transport Aggregate Report for selected interfaces, metrics and transaction protocols and applications. Note that this is not like the typical RMON controlTable and dataTable in which each entry creates its own data table. Each entry in this table enables the creation of multiple data tables on a study basis. For each interval, the study is updated in place and the current data content of the table becomes invalid. The control table entries are persistent across system reboots." ::= { tpmReports 1 } tpmAggrReportCntrlEntry OBJECT-TYPE SYNTAX TpmAggrReportCntrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the tpmAggrReportCntrlTable. An example of the indexing of this entry is tpmAggrReportCntrlDataSource.1" INDEX { tpmAggrReportCntrlIndex } ::= { tpmAggrReportCntrlTable 1 } TpmAggrReportCntrlEntry ::= SEQUENCE { tpmAggrReportCntrlIndex Unsigned32, tpmAggrReportCntrlApmCntrlIndex Unsigned32, tpmAggrReportCntrlDataSource DataSourceOrZero, tpmAggrReportCntrlAggrType TransactionAggregationType, tpmAggrReportCntrlInterval Unsigned32, tpmAggrReportCntrlReqSize Unsigned32, tpmAggrReportCntrlGrantedSize Unsigned32, tpmAggrReportCntrlReqReports Unsigned32, tpmAggrReportCntrlGrantedReports Unsigned32, tpmAggrReportCntrlStartTime TimeStamp, tpmAggrReportCntrlReportNumber Unsigned32, tpmAggrReportCntrlInsertsDenied Counter32, tpmAggrReportCntrlDroppedFrames Counter32, tpmAggrReportCntrlOwner OwnerString, tpmAggrReportCntrlStorageType StorageType, tpmAggrReportCntrlStatus RowStatus } tpmAggrReportCntrlIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies an entry in the tpmAggrReportCntrlTable. Each such entry defines a unique report whose results are placed in the tpmAggrReportTable on behalf of this tpmAggrReportCntrlEntry." ::= { tpmAggrReportCntrlEntry 1 } tpmAggrReportCntrlApmCntrlIndex OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This index associates this TpmAggrReportCntrlEntry directly with an existing ApmReportControlEntry. This link is used to synchronize reports in the associated tpmAggrReportTable. A value of 0 (zero) enables an independent control table that will report entries to tpmAggrReportTable based only on the other objects in this table. A non-zero value indicates that this row is defined through the APM-MIB. In this case, all row objects are set to their corresponding values in the APM-MIB. In the event that a SET is issued to a row object, while the value of the tpmAggrReportCntrlApmCntrlIndex is non-zero, the agent MUST respond as if the object of the SET command had MAX-ACCESS of read-only. This object may not be modified if the associated tpmAggrReportCntrlStatus object is equal to active(1)." DEFVAL { 0 } ::= { tpmAggrReportCntrlEntry 2 } tpmAggrReportCntrlDataSource OBJECT-TYPE SYNTAX DataSourceOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The source of the data for TPM Reports generated on behalf of this tpmAggrReportCntrlEntry. If the measurement is being performed by a probe, this should be set to interface or port where data was received for analysis. If the measurement isn't being performed by a probe, this should be set to the primary interface over which the measurement is being performed. If the measurement isn't being performed by a probe and there is no primary interface or this information isn't known, this object should be set to 0.0. If the tpmAggrReportCntrlApmCntrlIndex is non-zero, then this object is set to the corresponding apmReportControlTable object in the APM-MIB [RFCXXX1]. This object may not be modified if the associated tpmAggrReportCntrlStatus object is equal to active(1)." ::= { tpmAggrReportCntrlEntry 3 } tpmAggrReportCntrlAggrType OBJECT-TYPE SYNTAX TransactionAggregationType -- INTEGER { -- flows(1), -- clients(2), -- servers(3), -- applications(4) -- } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of aggregation being performed for this set of reports. If the tpmAggrReportCntrlApmCntrlIndex is non-zero, then this object should be set by the agent to the value of the apmReportControlAggregationType object. This object may not be modified if the associated tpmAggrReportCntrlStatus object is equal to active(1)." ::= { tpmAggrReportCntrlEntry 4 } tpmAggrReportCntrlInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The interval in seconds over which data is accumulated before being aggregated into a report in the tpmAggrReportTable. All reports with the same tpmAggrReportCntrlIndex will be based on the same interval. If the tpmAggrReportCntrlApmCntrlIndex is non-zero, then this object should be set by the agent to the value of the apmReportControlControlInterval object. This object may not be modified if the associated tpmReportAggregateCntrlStatus object is equal to active(1)." DEFVAL { 3600 } ::= { tpmAggrReportCntrlEntry 5 } tpmAggrReportCntrlReqSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of Client and Server combination entries requested for this report. If the tpmAggrReportCntrlApmCntrlIndex is non-zero, then this object should be set by the agent to the value of the apmReportControlRequestedSize object. When this object is created or modified, the probe should set tpmReportCntrlGrantedSize as closely to this object as is possible for the particular probe implementation and available resources. It is important to note that this value is the number of requested entries in the tpmAggrReportTable only. Since the probe can derive this table from the apmReportTable, the probe must make sure that sufficient resources exist to support the creation of the apmReportTable plus any additional resources required to convert or support this table. This object may not be modified if the associated tpmReportAggregateCntrlStatus object is equal to active(1)." ::= { tpmAggrReportCntrlEntry 6 } tpmAggrReportCntrlGrantedSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of performance entries in this report. When the associated tpmAggrReportCntrlReqSize object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular implementation and available resources. The probe must not lower this value except as a result of a set to the associated tpmAggrReportCntrlReqSize object. It is an implementation-specific matter as to whether or not zero-valued entries are available." ::= { tpmAggrReportCntrlEntry 7 } tpmAggrReportCntrlReqReports OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of saved reports requested to be allocated on behalf of this entry. If the tpmAggrReportCntrlApmCntrlIndex is non-zero, then this object should be set by the agent to the value of the apmReportControlcwRequestedReportsDataSource object. This object may not be modified if the associated tpmReportAggregateCntrlStatus object is equal to active(1)." ::= { tpmAggrReportCntrlEntry 8 } tpmAggrReportCntrlGrantedReports OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of saved reports the agent has allocated based on the requested amount in tpmAggrReportCntrlReqReports. Since each report can have many entries, the total number of entries allocated will be this number multiplied by the value of tpmAggrReportCntrlGrantedSize, or 1 if that object doesn't exist. When the associated tpmAggrReportCntrlReqReports object is created or modified, the agent should set this object as closely to the requested value as is possible for the particular implementation and available resources. When considering resources available, the agent must consider its ability to allocate this many reports each with the number of entries represented by tpmAggrReportCntrlGrantedSize, or 1 if that object doesn't exist. Note that while the storage required for each report may fluctuate due to changing conditions, the agent must continue to have storage available to satisfy the full report size for all reports when necessary. Further, the agent must not lower this value except as a result of a set to the associated tpmAggrReportCntrlReqSize object." ::= { tpmAggrReportCntrlEntry 9 } tpmAggrReportCntrlStartTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the system began processing the report in progress. Note that the report in progress is not available. This object may be used by the management station to figure out the start time for all previous reports saved for this tpmAggrReportCntrlEntry, as reports are started at fixed intervals. If the tpmAggrReportCntrlApmCntrlIndex is non-zero, then this object is set to the corresponding apmReportControlTable object in the APM-MIB defined in the IETF's RMONMIB WG." ::= { tpmAggrReportCntrlEntry 10 } tpmAggrReportCntrlReportNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the report in progress. When an tpmAggrReportCntrlEntry is activated, the first report will be numbered zero. If the tpmAggrReportCntrlApmCntrlIndex is non-zero, then this object should be set by the agent to the value of the apmReportControlReportNumber object." ::= { tpmAggrReportCntrlEntry 11 } tpmAggrReportCntrlInsertsDenied OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failed attempts to add an entry to reports for this TpmAggrReportCntrlEntry because the number of entries would have exceeded tpmAggrReportCntrlGrantedSize. This number is valuable in determining if enough entries have been allocated for reports in light of fluctuating network usage. Note that an entry that is denied will often be attempted again, this number will not predict the exact number of additional entries needed, but can be used to understand the relative magnitude of the problem. Also note that there is no ordering specified for the entries in the report, thus there are no rules for which entries will be omitted when not enough entries are available. As a consequence, the agent is not required to delete 'least valuable' entries first." ::= { tpmAggrReportCntrlEntry 12 } tpmAggrReportCntrlDroppedFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames which were received by the agent and therefore not accounted for in the *StatsDropEvents, but for which the agent chose not to count for this entry for whatever reason. Most often, this event occurs when the agent is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the alMatrixTables are not implemented or are inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped." ::= { tpmAggrReportCntrlEntry 13 } tpmAggrReportCntrlOwner OBJECT-TYPE SYNTAX OwnerString MAX-ACCESS read-create STATUS current DESCRIPTION "The entity that configured this entry and is therefore using the resources assigned to it. If the tpmAggrReportCntrlApmCntrlIndex is non-zero, then this object should be set by the agent to the value of the apmReportControlReportNumber object. This object may not be modified if the associated tpmReportAggregateCntrlStatus object is equal to active(1)." ::= { tpmAggrReportCntrlEntry 14 } tpmAggrReportCntrlStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type of this tpmAggrReportCntrlEntry. If the value of this object is 'permanent', no objects in this row need to be writable." ::= { tpmAggrReportCntrlEntry 15 } tpmAggrReportCntrlStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this performance control entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If the tpmAggrReportCntrlApmCntrlIndex is non-zero, then this object should be set by the agent to the value of the apmReportControlReportNumber object. Once this object is set to active(1), no objects in the tpmAggrReportCntrlTable can be changed. If this object is not equal to active(1), all associated entries in the tpmAggrReportTable shall be deleted." ::= { tpmAggrReportCntrlEntry 16 } -- -- Transport Aggregate Report Table -- tpmAggrReportTable OBJECT-TYPE SYNTAX SEQUENCE OF TpmAggrReportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains transport performance metric studies for each of the control table entries in tpmAggrReportCntrlTable. These studies are provided based on the selections and parameters found for the entry in the tpmAggregateReportCntrlTable. The performance statistics are specified in the tpmTransMetricDirTable associated with the application in question and indexed by appLocalIndex and tpmTransMetricIndex." ::= { tpmReports 2 } tpmAggrReportEntry OBJECT-TYPE SYNTAX TpmAggrReportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the tpmAggrReportTable. The tpmAggrReportCntrlIndex value in the index identifies the tpmAggrReportCntrlEntry on whose behalf this entry was created. The tpmAggrReportIndex value in the index identifies which report (in the series of reports) this entry is a part of. The tpmAggrReportAppLocalIndex value in the index identifies the application protocol that is being reported. The tpmTransMetricIndex value in the index identifies the transaction protocol-metric pair for the traffic flows aggregated in this entry. The protocolDirLocalIndex value in the index identifies the network layer protocol of the tpmAggrReportServerAddress. When the associated tpmAggrReportCntrlAggrType value is equal to applications(4) or clients(2), this value will equal 0. The tpmAggrReportServerAddress value in the index identifies the network layer address of the server in traffic flows aggregated in this entry. The tpmAggrReportApmNameClientID value in the index identifies the client in traffic flows aggregated in this entry. If the associated tpmAggrReportCntrlAggrType is equal to applications(4) or servers(3), then this object will be set to 0. An example of the indexing of this entry is tpmAggrReportStatN.3.15.34.262.18.4.128.2.6.7.3256521" INDEX { tpmAggrReportCntrlIndex, tpmAggrReportIndex, tpmAggrReportAppLocalIndex, -- Application Layer tpmAggrReportTransMetricIndex, -- Metric and Protocol protocolDirLocalIndex, -- Network Layer tpmAggrReportServerAddress, tpmAggrReportApmNameClientID } ::= { tpmAggrReportTable 1 } TpmAggrReportEntry ::= SEQUENCE { tpmAggrReportIndex Unsigned32, tpmAggrReportAppLocalIndex AppLocalIndex, tpmAggrReportTransMetricIndex TpmTransactionMetricIndex, tpmAggrReportServerAddress OCTET STRING, tpmAggrReportApmNameClientID ClientID, tpmAggrReportStatN ZeroBasedCounter32, tpmAggrReportOverflowStatN ZeroBasedCounter32, tpmAggrReportHCStatN ZeroBasedCounter64, tpmAggrReportStatSumX ZeroBasedCounter32, tpmAggrReportOverflowStatSumX ZeroBasedCounter32, tpmAggrReportHCStatSumX ZeroBasedCounter64, tpmAggrReportStatMaximum ZeroBasedCounter32, tpmAggrReportStatMinimum ZeroBasedCounter32, tpmAggrReportStatSumSq ZeroBasedCounter32, tpmAggrReportOverflowStatSumSq ZeroBasedCounter32, tpmAggrReportHCStatSumSq ZeroBasedCounter64, tpmAggrReportStatSumIX ZeroBasedCounter32, tpmAggrReportOverflowStatSumIX ZeroBasedCounter32, tpmAggrReportHCStatSumIX ZeroBasedCounter64, tpmAggrReportStatSumIXSq ZeroBasedCounter32, tpmAggrReportOverflowStatSumIXSq ZeroBasedCounter32, tpmAggrReportHCStatSumIXSq ZeroBasedCounter64 } tpmAggrReportIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tpmAggrReportCntrlNumber for the report to which this entry belongs." ::= { tpmAggrReportEntry 1 } tpmAggrReportAppLocalIndex OBJECT-TYPE SYNTAX AppLocalIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The common application of the transactions aggregated in this entry." ::= { tpmAggrReportEntry 2 } tpmAggrReportTransMetricIndex OBJECT-TYPE SYNTAX TpmTransactionMetricIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique index that identifies the transaction and metric associated with the statistics reported here." ::= { tpmAggrReportEntry 3 } tpmAggrReportServerAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..108)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network layer address of the server host in this conversation. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. Since this object is an index variable, it is encoded in the index according to the index encoding rules. For example, if the protocolDirLocalIndex indicates an encapsulation of IPv4, this object is encoded as a length octet of 4, followed by the 4 octets of the IPv4 address, in network byte order. If the associated tpmAggrReportCntrlAggrType is equal to application(4) or client(2), then this object will be a null string and will be encoded simply as a length octet of 0." ::= { tpmAggrReportEntry 4 } tpmAggrReportApmNameClientID OBJECT-TYPE SYNTAX ClientID MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique ID assigned to the machine represented by this mapping. This ID is assigned by the agent using an implementation-specific algorithm." ::= { tpmAggrReportEntry 5 } tpmAggrReportStatN OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the total number of data points for the specified metric. This number always represents the total size of the statistical datum analyzed. Each metric specifies the exact meaning of this object. This value represents the results for one metric and is related directly to the specific parameters of the metric and the Server and Client addresses involved." ::= { tpmAggrReportEntry 6 } tpmAggrReportOverflowStatN OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated tpmAggrReportStatN counter has overflowed. Note that this object will only be instantiated if the associated tpmAggrReportHCStatN object is also instantiated for a particular dataSource." ::= { tpmAggrReportEntry 7 } tpmAggrReportHCStatN OBJECT-TYPE SYNTAX ZeroBasedCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high-capacity version of tpmAggrReportStatN. Note that this object will only be instantiated if the agent supports High Capacity monitoring for a particular dataSource." ::= { tpmAggrReportEntry 8 } tpmAggrReportStatSumX OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of all the data point values for the specified metric. This number always represents the total values of the statistical datum analyzed. Each metric specifies the exact meaning of this object. This value represents the results of one metric and is related directly to the specific parameters of the metric and the Server and Client addresses involved." ::= { tpmAggrReportEntry 9 } tpmAggrReportOverflowStatSumX OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated tpmAggrReportStatSumX counter has overflowed. Note that this object will only be instantiated if the associated tpmAggrReportHCStatSumX object is also instantiated for a particular dataSource." ::= { tpmAggrReportEntry 10 } tpmAggrReportHCStatSumX OBJECT-TYPE SYNTAX ZeroBasedCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high-capacity version of tpmAggrReportStatSumX. Note that this object will only be instantiated if the agent supports High Capacity monitoring for a particular dataSource." ::= { tpmAggrReportEntry 11 } tpmAggrReportStatMaximum OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The single maximum data point value observed during the study period for the specified metric. This number always represents the maximum value of any single statistical datum analyzed. Each metric specifies the exact meaning of this object. This value represents the results of one metric and is related directly to the specific parameters of the metric and the Server and Client addresses involved." ::= { tpmAggrReportEntry 12 } tpmAggrReportStatMinimum OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The single minimum data point value observed during the study period for the specified metric. This number always represents the minimum value of any single statistical datum analyzed. Each metric specifies the exact meaning of this object. This value represents the results of one metric and is related directly to the specific parameters of the metric and the Server and Client addresses involved." ::= { tpmAggrReportEntry 13 } tpmAggrReportStatSumSq OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of all the squared data point values for the specified metric. This number always represents the total of the squared values of the statistical datum analyzed. Each metric specifies the exact meaning of this object. This value represents the results of one metric and is related directly to the specific parameters of the metric and the Server and Client addresses involved." ::= { tpmAggrReportEntry 14 } tpmAggrReportOverflowStatSumSq OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated tpmAggrReportStatSumSq counter has overflowed. Note that this object will only be instantiated if the associated tpmAggrReportHCStatSumSq object is also instantiated for a particular dataSource." ::= { tpmAggrReportEntry 15 } tpmAggrReportHCStatSumSq OBJECT-TYPE SYNTAX ZeroBasedCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high-capacity version of tpmAggrReportStatSumSq. Note that this object will only be instantiated if the agent supports High Capacity monitoring for a particular dataSource." ::= { tpmAggrReportEntry 16 } tpmAggrReportStatSumIX OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "For each interval, each data point is associated with a value I, I = 1..N where N is the number of data points, tpmAggrReportStatN. IX is the multiplication of the data point value with the current I. This value along with the other statistics values allow the calculation of the slope of the least-squares line through the data points." ::= { tpmAggrReportEntry 17 } tpmAggrReportOverflowStatSumIX OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated tpmAggrReportStatSumIX counter has overflowed. Note that this object will only be instantiated if the associated tpmAggrReportHCStatSumIX object is also instantiated for a particular dataSource." ::= { tpmAggrReportEntry 18 } tpmAggrReportHCStatSumIX OBJECT-TYPE SYNTAX ZeroBasedCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high-capacity version of tpmAggrReportStatSumIX. Note that this object will only be instantiated if the agent supports High Capacity monitoring for a particular dataSource." ::= { tpmAggrReportEntry 19 } tpmAggrReportStatSumIXSq OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "For each interval, each data point is associated with a value I, I = 1..N where N is the number of data points, tpmAggrReportStatN. IX is the multiplication of the data point value with the current I. This value along with the other statistics values allow the calculation of the slope of the least-squares line through the data points." ::= { tpmAggrReportEntry 20 } tpmAggrReportOverflowStatSumIXSq OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated tpmAggrReportStatSumIXSq counter has overflowed. Note that this object will only be instantiated if the associated tpmAggrReportHCStatSumIXSq object is also instantiated for a particular dataSource." ::= { tpmAggrReportEntry 21 } tpmAggrReportHCStatSumIXSq OBJECT-TYPE SYNTAX ZeroBasedCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high-capacity version of tpmAggrReportStatSumIXSq. Note that this object will only be instantiated if the agent supports High Capacity monitoring for a particular dataSource." ::= { tpmAggrReportEntry 22 } -- -- The tpmCurrentReportsGroup -- tpmCurReportTable OBJECT-TYPE SYNTAX SEQUENCE OF TpmCurReportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table will contain entries associated with an apmReportControlEntry which are a current 'snapshot' of the metrics being collected in association with a set of TPM related application transactions. This table contains all sub-flow metrics for transactions that have been started but have not yet finished, i.e., current, and a history of those that have finished, i.e., completed. It may not also be obvious from the context whether a transaction is currently in-progress or has completed. Therefore, the completion status of a transaction is indicated by the value of the tpmCurReportCompletion object." ::= { tpmReports 3 } tpmCurReportEntry OBJECT-TYPE SYNTAX TpmCurReportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the tpmCurReportTable. The tpmAggrReportControlIndex value in the index identifies the tpmAggrReportCntrlEntry on whose behalf this entry was created. The tpmCurReportAppLocalIndex value in the index identifies the application protocol that is begin reported. The protocolDirLocalIndex value in the index identifies the network layer protocol of the tpmAggrReportServerAddress. When the associated tpmAggrReportCntrlAggrType value is equal to applications(4), this value will equal 0. The tpmCurReportServerAddress value in the index identifies the network layer address of the server in traffic flows aggregated in this entry. The tpmCurReportCurrentApmNameClientID value in the index identifies the network layer address of the client in traffic flows aggregated in this entry. The tpmCurReportCurrentMetricIndex value in the index identifies the transported application protocol of the traffic flows aggregated in this entry. Note that the order of protocolDirLocalIndex variables is the opposite of that in the RMON2 MIB (application.network instead of network.application) so that the report entries are sorted by application first, server second and client third. The tpmCurReportCntrIndex value in the index identifies the tpmAggrReportCntrlEntry on whose behalf this entry was created. The tpmCurReportMetricIndex value in the index identifies the metric and protocol of the tpmCurReportServerAddress, via the tpmTransMetricDir table. An example of the indexing of this table is tpmCurReportStatisticN.3.34.262.18.4.128.2.6.6.3256521.29667" INDEX { tpmAggrReportCntrlIndex, tpmCurReportAppLocalIndex, -- Application Layer tpmCurReportTransMetricIndex, -- Metric and Protocol protocolDirLocalIndex, -- Network Layer tpmCurReportServerAddress, tpmCurReportApmNameClientID, tpmCurReportApmTransactionID } ::= { tpmCurReportTable 1 } TpmCurReportEntry ::= SEQUENCE { tpmCurReportAppLocalIndex AppLocalIndex, tpmCurReportTransMetricIndex TpmTransactionMetricIndex, tpmCurReportServerAddress OCTET STRING, tpmCurReportApmNameClientID ClientID, tpmCurReportApmTransactionID Unsigned32, tpmCurReportMetricValue ZeroBasedCounter32, tpmCurReportCompletion INTEGER } tpmCurReportAppLocalIndex OBJECT-TYPE SYNTAX AppLocalIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The common application of the transactions reported in this entry." ::= { tpmCurReportEntry 1 } tpmCurReportTransMetricIndex OBJECT-TYPE SYNTAX TpmTransactionMetricIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique index that identifies the transaction and metric associated with the statistics reported here." ::= { tpmCurReportEntry 2 } tpmCurReportServerAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..108)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network server address for this tpmCurReportEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IPv4, this object is encoded as a length octet of 4, followed by the 4 octets of the IPv4 address, in network byte order." ::= { tpmCurReportEntry 3 } tpmCurReportApmNameClientID OBJECT-TYPE SYNTAX ClientID MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique ID assigned to the machine represented by this mapping. This ID is assigned by the agent using an implementation-specific algorithm." ::= { tpmCurReportEntry 4 } tpmCurReportApmTransactionID OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value for this transaction amongst other transactions sharing the same application, transaction-layer protocol and metric and server and client addresses. Implementations may choose to use the value of the client's source port, when possible. If the tpmAggrReportCntrlApmCntrlIndex is non-zero, then this object is set to the corresponding apmTransactionID object in the APM-MIB developed in the IETF's RMONMIB WG." ::= { tpmCurReportEntry 5 } tpmCurReportMetricValue OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the metric being evaluated. For some transaction types this value may be 0, e.g., the current round trip time for a DNS query. For other transaction types this will represent the current value of a continuously measured metric, e.g., the current throughput of an FTP transaction." ::= { tpmCurReportEntry 6 } tpmCurReportCompletion OBJECT-TYPE SYNTAX INTEGER { current(1), completed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this transaction. It is not always obvious from context whether a transaction is on-going or completed. E.g., an ftp-GET transaction may last several minutes or hours and a value found in the tpmCurReportMetricValue object lists to observed throughput for the transaction up to this point in time. The value of the tpmCurReportCompletion indicates whether the transaction has completed." ::= { tpmCurReportEntry 7 } tpmCurReportSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of completed transactions desired to be retained in the tpmCurReportTable. If the agent doesn't have enough resources to retain this many, it will retain as many as possible. Regardless of this value, the agent must attempt to keep records for all current transactions it is monitoring. The agent should consider this value to give a hint as to how many transactions to save. This is not a hard limit, just a hint to a maximum value of interest. If this value is reduced by the management station, the agent can take note, it may free some records, or it may do nothing. The value of this object must persist across reboots." ::= { tpmReports 4 } -- -- The tpmExceptionReportsGroup -- tpmExcpReportTable OBJECT-TYPE SYNTAX SEQUENCE OF TpmExcpReportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all sub-flow metrics for transactions that have been tagged by the apmExceptionTable filter as having had poor performance." ::= { tpmReports 5 } tpmExcpReportEntry OBJECT-TYPE SYNTAX TpmExcpReportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the tpmExcpReportTable. This table contains aggregated information associated with exceptions counted in the apmExceptionTable. The information is aggregated in a manner identical to the aggregation in the tpmAggrReportTable, with the exception that data only from transactions associated with a flagged application is included. The indexing into this table follows the indexing in the APM-MIB but adds the tpmTransMetricIndex to identify the sub-application transaction and metric pair." INDEX { apmAppDirAppLocalIndex, -- Application apmAppDirResponsivenessType, -- Responsiveness Type apmExceptionIndex, -- Linkage to ApmExceptions tpmExcpReportTransMetricIndex -- Metric and Protocol } ::= { tpmExcpReportTable 1 } TpmExcpReportEntry ::= SEQUENCE { tpmExcpReportTransMetricIndex TpmTransactionMetricIndex, tpmExcpReportStatN ZeroBasedCounter32, tpmExcpReportOverflowStatN ZeroBasedCounter32, tpmExcpReportHCStatN ZeroBasedCounter64, tpmExcpReportStatSumX ZeroBasedCounter32, tpmExcpReportOverflowStatSumX ZeroBasedCounter32, tpmExcpReportHCStatSumX ZeroBasedCounter64, tpmExcpReportStatMaximum ZeroBasedCounter32, tpmExcpReportStatMinimum ZeroBasedCounter32, tpmExcpReportStatSumSq ZeroBasedCounter32, tpmExcpReportOverflowStatSumSq ZeroBasedCounter32, tpmExcpReportHCStatSumSq ZeroBasedCounter64, tpmExcpReportStatSumIX ZeroBasedCounter32, tpmExcpReportOverflowStatSumIX ZeroBasedCounter32, tpmExcpReportHCStatSumIX ZeroBasedCounter64, tpmExcpReportStatSumIXSq ZeroBasedCounter32, tpmExcpReportOverflowStatSumIXSq ZeroBasedCounter32, tpmExcpReportHCStatSumIXSq ZeroBasedCounter64 } tpmExcpReportTransMetricIndex OBJECT-TYPE SYNTAX TpmTransactionMetricIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique index that identifies the transaction and metric associated with the data reported here." ::= { tpmExcpReportEntry 1 } tpmExcpReportStatN OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the total number of data points for the specified metric. This number always represents the total size of the statistical datum analyzed. Each metric specifies the exact meaning of this object. This value represents the results of one metric and is related directly to the specific parameters of the metric and the Server and Client addresses involved." ::= { tpmExcpReportEntry 2 } tpmExcpReportOverflowStatN OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated tpmExcpReportStatN counter has overflowed. Note that this object will only be instantiated if the associated tpmExcpReportHCStatN object is also instantiated for a particular dataSource." ::= { tpmExcpReportEntry 3 } tpmExcpReportHCStatN OBJECT-TYPE SYNTAX ZeroBasedCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high-capacity version of tpmExcpReportStatN. Note that this object will only be instantiated if the agent supports High Capacity monitoring for a particular dataSource." ::= { tpmExcpReportEntry 4 } tpmExcpReportStatSumX OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of all the data point values for the specified metric. This number always represents the total values of the statistical datum analyzed. Each metric specifies the exact meaning of this object. This value represents the results of one metric and is related directly to the specific parameters of the metric and the Server and Client addresses involved." ::= { tpmExcpReportEntry 5 } tpmExcpReportOverflowStatSumX OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated tpmExcpReportStatSumX counter has overflowed. Note that this object will only be instantiated if the associated tpmExcpReportHCStatSumX object is also instantiated for a particular dataSource." ::= { tpmExcpReportEntry 6 } tpmExcpReportHCStatSumX OBJECT-TYPE SYNTAX ZeroBasedCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high-capacity version of tpmExcpReportStatSumX. Note that this object will only be instantiated if the agent supports High Capacity monitoring for a particular dataSource." ::= { tpmExcpReportEntry 7 } tpmExcpReportStatMaximum OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The single maximum data point value observed during the study period for the specified metric. This number always represents the maximum value of any single statistical datum analyzed. Each metric specifies the exact meaning of this object. This value represents the results of one metric and is related directly to the specific parameters of the metric and the Server and Client addresses involved." ::= { tpmExcpReportEntry 8 } tpmExcpReportStatMinimum OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The single minimum data point value observed during the study period for the specified metric. This number always represents the minimum value of any single statistical datum analyzed. Each metric specifies the exact meaning of this object. This value represents the results of one metric and is related directly to the specific parameters of the metric and the Server and Client addresses involved." ::= { tpmExcpReportEntry 9 } tpmExcpReportStatSumSq OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of all the squared data point values for the specified metric. This number always represents the total of the squared values of the statistical datum analyzed. Each metric specifies the exact meaning of this object. This value represents the results of one metric and is related directly to the specific parameters of the metric and the Server and Client addresses involved." ::= { tpmExcpReportEntry 10 } tpmExcpReportOverflowStatSumSq OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated tpmExcpReportStatSumSq counter has overflowed. Note that this object will only be instantiated if the associated tpmExcpReportHCStatSumSq object is also instantiated for a particular dataSource." ::= { tpmExcpReportEntry 11 } tpmExcpReportHCStatSumSq OBJECT-TYPE SYNTAX ZeroBasedCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high-capacity version of tpmExcpReportStatSumSq. Note that this object will only be instantiated if the agent supports High Capacity monitoring for a particular dataSource." ::= { tpmExcpReportEntry 12 } tpmExcpReportStatSumIX OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "For each interval, each data point is associated with a value I, I = 1..N where N is the number of data points, tpmExcpReportStatSumIX is the multiplication of the data point value with the current I. This value along with the other statistics values allow the calculation of the slope of the least-squares line through the data points." ::= { tpmExcpReportEntry 13 } tpmExcpReportOverflowStatSumIX OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated tpmExcpReportStatSumIX counter has overflowed. Note that this object will only be instantiated if the associated tpmExcpReportHCStatSumIX object is also instantiated for a particular dataSource." ::= { tpmExcpReportEntry 14 } tpmExcpReportHCStatSumIX OBJECT-TYPE SYNTAX ZeroBasedCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high-capacity version of tpmExcpReportStatSumIX. Note that this object will only be instantiated if the agent supports High Capacity monitoring for a particular dataSource." ::= { tpmExcpReportEntry 15 } tpmExcpReportStatSumIXSq OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "For each interval, each data point is associated with a value I, I = 1..N where N is the number of data points, tpmExcpReportStatN. IX is the multiplication of the data point value with the current I. This value along with the other statistics values allow the calculation of the slope of the least-squares line through the data points." ::= { tpmExcpReportEntry 16 } tpmExcpReportOverflowStatSumIXSq OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated tpmExcpReportStatSumIXSq counter has overflowed. Note that this object will only be instantiated if the associated tpmExcpReportHCStatSumIXSq object is also instantiated for a particular dataSource." ::= { tpmExcpReportEntry 17 } tpmExcpReportHCStatSumIXSq OBJECT-TYPE SYNTAX ZeroBasedCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high-capacity version of tpmExcpReportStatSumIXSq. Note that this object will only be instantiated if the agent supports High Capacity monitoring for a particular dataSource." ::= { tpmExcpReportEntry 18 } -- -- TPM Conformance -- tpmMIBCompliances OBJECT IDENTIFIER ::= { tpmConformance 1 } tpmGroups OBJECT IDENTIFIER ::= { tpmConformance 2 } -- -- TPM Compliance Statement -- tpmMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for conformance to the TPM-MIB. This compliance statement defines the following TPM-MIB implementation: - tpmCapabilitiesGroup (minimum) - tpmAggregateReportsGroup (minimum) - tpmCurrentReportsGroup (optional) - tpmExceptionReportsGroup (optional). In order to implement the (optional) tpmCurrentReportsGroup and tpmExceptionReportsGroup it is necessary to implement pieces of the APM-MIB as described in the tpmApmMIBCompliance MODULE below. Further, in the event that the TPM-MIB be used to provide a drill-down capability, which is the true value of this MIB, then the tpmApmReportControlGroup must be implemented." MODULE -- this module MANDATORY-GROUPS { tpmCapabilitiesGroup, tpmAggregateReportsGroup } GROUP tpmCurrentReportsGroup DESCRIPTION "The implementation of this group is optional." GROUP tpmExceptionReportsGroup DESCRIPTION "The implementation of this group is optional. However, because the control for this reporting group resides with the APM-MIB module, the apmReportGroup and the apmExceptionGroup must also be implemented." ::= { tpmMIBCompliances 1 } -- -- APM MIB Compliance -- tpmApmMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "This compliance statement defines the following APM-MIB optional groups in order for the TPM-MIB to be used in drill-down support of the APM-MIB measurements: - apmReportGroup (optional) - apmExceptionGroup (optional) Further, if the tpmCurrentReportsGroup and the tpmExcpReportsGroup are to be implemented, then these APM-MIB groups are necessary." MODULE APM-MIB MANDATORY-GROUPS { apmReportGroup, apmExceptionGroup } ::= { tpmMIBCompliances 2 } -- -- tpmCurrentReportsGroup Compliance -- tpmCurrentReportsCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "This defines the Current Reports compliance. This is useful when information on in-progress and historical transaction-level data is desired." MODULE -- this module MANDATORY-GROUPS { tpmCapabilitiesGroup, tpmAggregateReportsGroup, tpmCurrentReportsGroup } ::= { tpmMIBCompliances 3 } -- -- tpmExceptionReportsGroup Compliance -- tpmExceptionReportsCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "This defines the Exception Reports compliance. This is useful when information on transactions whose performance is deemed out-of-bounds." MODULE -- this module MANDATORY-GROUPS { tpmCapabilitiesGroup, tpmAggregateReportsGroup, apmReportGroup, apmExceptionGroup, tpmExceptionReportsGroup } ::= { tpmMIBCompliances 4 } -- -- TPM-MIB Groups -- tpmCapabilitiesGroup OBJECT-GROUP OBJECTS { tpmClockResolution, tpmClockMaxSkew, tpmClockSource, tpmTransMetricDirLastChange, tpmTransMetricProtocolIndex, tpmTransMetricMetricIndex, tpmTransMetricDirConfig, tpmMetricDefType, tpmMetricDefDirType, tpmMetricDefName, tpmMetricDefReference, tpmMetricDefGlobalID } STATUS current DESCRIPTION "The tpmCapabilitiesGroup specify various capabilities associated with the monitoring agent." ::= { tpmGroups 1 } tpmAggregateReportsGroup OBJECT-GROUP OBJECTS { tpmAggrReportCntrlApmCntrlIndex, tpmAggrReportCntrlDataSource, tpmAggrReportCntrlAggrType, tpmAggrReportCntrlInterval, tpmAggrReportCntrlReqSize, tpmAggrReportCntrlGrantedSize, tpmAggrReportCntrlReqReports, tpmAggrReportCntrlGrantedReports, tpmAggrReportCntrlStartTime, tpmAggrReportCntrlReportNumber, tpmAggrReportCntrlInsertsDenied, tpmAggrReportCntrlDroppedFrames, tpmAggrReportCntrlOwner, tpmAggrReportCntrlStorageType, tpmAggrReportCntrlStatus, tpmAggrReportStatN, tpmAggrReportOverflowStatN, tpmAggrReportHCStatN, tpmAggrReportStatSumX, tpmAggrReportOverflowStatSumX, tpmAggrReportHCStatSumX, tpmAggrReportStatMaximum, tpmAggrReportStatMinimum, tpmAggrReportStatSumSq, tpmAggrReportOverflowStatSumSq, tpmAggrReportHCStatSumSq, tpmAggrReportStatSumIX, tpmAggrReportOverflowStatSumIX, tpmAggrReportHCStatSumIX, tpmAggrReportStatSumIXSq, tpmAggrReportOverflowStatSumIXSq, tpmAggrReportHCStatSumIXSq } STATUS current DESCRIPTION "The tpmAggregateReportsGroup provides control and reporting of aggregate measurement statistics." ::= { tpmGroups 2 } tpmCurrentReportsGroup OBJECT-GROUP OBJECTS { tpmCurReportMetricValue, tpmCurReportCompletion, tpmCurReportSize } STATUS current DESCRIPTION "The tpmCurrentReportsGroup contains metric information relating to on-going measurements as well as historical values." ::= { tpmGroups 3 } tpmExceptionReportsGroup OBJECT-GROUP OBJECTS { tpmExcpReportStatN, tpmExcpReportOverflowStatN, tpmExcpReportHCStatN, tpmExcpReportStatSumX, tpmExcpReportOverflowStatSumX, tpmExcpReportHCStatSumX, tpmExcpReportStatMaximum, tpmExcpReportStatMinimum, tpmExcpReportStatSumSq, tpmExcpReportOverflowStatSumSq, tpmExcpReportHCStatSumSq, tpmExcpReportStatSumIX, tpmExcpReportOverflowStatSumIX, tpmExcpReportHCStatSumIX, tpmExcpReportStatSumIXSq, tpmExcpReportOverflowStatSumIXSq, tpmExcpReportHCStatSumIXSq } STATUS current DESCRIPTION "The tpmExceptionReportsGroup reports sub-application level statistics associated with errant applications." ::= { tpmGroups 4 } END -- -- Copyright (C) The Internet Society (2003). All Rights Reserved. -- -- This document and translations of it may be copied and furnished to -- others, and derivative works that comment on or otherwise explain it -- or assist in its implementation may be prepared, copied, published -- and distributed, in whole or in part, without restriction of any -- kind, provided that the above copyright notice and this paragraph are -- included on all such copies and derivative works. However, this -- document itself may not be modified in any way, such as by removing -- the copyright notice or references to the Internet Society or other -- Internet organizations, except as needed for the purpose of -- developing Internet standards in which case the procedures for -- copyrights defined in the Internet Standards process must be -- followed, or as required to translate it into languages other than -- English. -- -- The limited permissions granted above are perpetual and will not be -- revoked by the Internet Society or its successors or assigns. -- -- This document and the information contained herein is provided on an -- "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING -- TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING -- BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION -- HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF -- MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -- *************************************************************** -- * Note to the RFC Editor (to be removed prior to publication) * -- * * -- * 1) The reference to RFCXXXX within the DESCRIPTION clauses * -- * of the MIB module point to this draft and are to be * -- * assigned by the RFC Editor. * -- * * -- * 2) The reference to RFCXXX1 throughout this document point * -- * to the current . This * -- * MIB module imports TCs from this draft. Once the APM MIB * -- * draft is published as an RFC, then the RFCXXX1 references * -- * need to be replaced with the APM MIB RFC number. * -- * * -- * 3) The reference to RFCXXX2 throughout this document point * -- * to the current . This * -- * MIB module imports TCs from this draft. Once the SSPM MIB * -- * draft is published as an RFC, then the RFCXXX2 references * -- * need to be replaced with the SSPM MIB RFC number. * -- * * -- ***************************************************************