-- extracted from draft-ietf-iptel-trip-mib-01.txt -- at Fri May 14 06:20:48 2004 TRIP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, OBJECT-IDENTITY, Unsigned32, Integer32, Counter32, mib-2 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DateAndTime, TimeInterval, TruthValue, TimeStamp, RowStatus FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE, Zinman/Walker/Jiang 4 Internet Draft January 2002 NOTIFICATION-GROUP FROM SNMPv2-CONF InetAddressType, InetAddress FROM INET-ADDRESS-MIB applIndex FROM NETWORK-SERVICES-MIB; tripMIB MODULE-IDENTITY LAST-UPDATED "200201100000Z" ORGANIZATION "IETF IPTel Working Group" CONTACT-INFO "Co-editor David Zinman email: dzinman@sympatico.ca Co-editor Dave Walker SS8 Networks, Inc. postal: 495 March Road, Suite #500 Ottawa, ON, K2K 3G1 Canada email: drwalker@ss8.com phone: +1 613 592 2100 Co-editor Jianping Jiang SS8 Networks, Inc. postal: 495 March Road, Suite #500 Ottawa, ON, K2K 3G1 Canada email: jianping@ss8.com phone: +1 613 592 2100 " DESCRIPTION "The MIB module describing Telephony Routing over IP (TRIP). TRIP is a policy driven inter-administrative domain protocol for advertising the reachability of telephony destinations between location servers (LS), and for advertising attributes of the routes to those destinations." REVISION "200102260000Z" DESCRIPTION "The initial revision of this MIB module." ::= { mib-2 } -- to be assigned by IANA -- -- Textual Conventions -- TripItad ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The values for identifying the IP Telephony Zinman/Walker/Jiang 5 Internet Draft January 2002 Administrative Domain (ITAD)." SYNTAX Unsigned32 (0..4294967295) TripId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TRIP Identifier uniquely identifies a LS within its ITAD. It is a 4 octet unsigned integer that may represent the IPv4 address of the Location Server (LS)." SYNTAX Unsigned32 (0..4294967295) TripAppProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The application protocol used for communication with TRIP Location Servers (LS). Protocols defined in this document are: tripSupProtSIP tripSupProtH323Q931 tripSupProtH323RAS tripSupProtH323ANNEXG Users can add their own application protocol types by defining a TripAppProtocol type in a private specification." SYNTAX OBJECT IDENTIFIER TripAddressFamily ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A type of address for a TRIP route. Address families defined within this MIB module are: tripAddrFamilyDecimal tripAddrFamilyPentadecimal tripAddrFamilyE164 Users can add their own address family types by defining a TripAddressFamily type in a private specification." SYNTAX OBJECT IDENTIFIER TripCommunityId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The range of legal values for a TRIP Community Identifier." SYNTAX Unsigned32 (0..4294967295) TripProtocolVersion ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The version number of the TRIP protocol." SYNTAX Integer32 (1..255) TripSendReceiveMode ::= TEXTUAL-CONVENTION Zinman/Walker/Jiang 6 Internet Draft January 2002 STATUS current DESCRIPTION "The operational mode of the TRIP application." SYNTAX INTEGER { sendReceive(1), sendOnly(2), receiveOnly(3) } tripMIBNotifications OBJECT IDENTIFIER ::= { tripMIB 0 } tripMIBObjects OBJECT IDENTIFIER ::= { tripMIB 1 } tripMIBConformance OBJECT IDENTIFIER ::= { tripMIB 2 } tripMIBCompliance OBJECT IDENTIFIER ::= { tripMIBConformance 1 } tripMIBGroups OBJECT IDENTIFIER ::= { tripMIBConformance 2 } -- -- Supported protocols -- tripSupportedProtocols OBJECT-IDENTITY STATUS current DESCRIPTION "Registration point for the protocols supported by TRIP." ::= { tripMIBObjects 100 } tripSupProtSIP OBJECT IDENTIFIER ::= { tripSupportedProtocols 1 } tripSupProtH323Q931 OBJECT IDENTIFIER ::= { tripSupportedProtocols 2 } tripSupProtH323RAS OBJECT IDENTIFIER ::= { tripSupportedProtocols 3 } tripSupProtH323ANNEXG OBJECT IDENTIFIER ::= { tripSupportedProtocols 4 } -- -- Address Families -- tripAddressFamilies OBJECT-IDENTITY STATUS current DESCRIPTION "Registration point for the address families supported by TRIP." ::= { tripMIBObjects 101 } tripAddrFamilyDecimal OBJECT IDENTIFIER ::= { tripAddressFamilies 1 } tripAddrFamilyPentadecimal OBJECT IDENTIFIER ::= { tripAddressFamilies 2 } tripAddrFamilyE164 OBJECT IDENTIFIER ::= { tripAddressFamilies 3 } -- -- tripCfgTable -- Zinman/Walker/Jiang 7 Internet Draft January 2002 tripCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF TripCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the common configuration objects applicable to all TRIP applications referenced by the applIndex. Each row represents those objects for a particular TRIP LS present in this system. The instances of TRIP LS's are uniquely identified by the applIndex." ::= { tripMIBObjects 1 } tripCfgEntry OBJECT-TYPE SYNTAX TripCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of common configuration." INDEX { applIndex } ::= { tripCfgTable 1 } TripCfgEntry ::= SEQUENCE { tripProtocolVersion TripProtocolVersion, tripItad TripItad, tripIdentifier TripId, tripOperStatus INTEGER, tripAdminStatus INTEGER, tripAddrIAddrType InetAddressType, tripAddr InetAddress, tripPort Integer32, tripMinItadOriginationInterval Integer32, tripMinRouteAdvertisementInterval Integer32, tripMaxPurgeTime Integer32, tripDisableTime Integer32, tripSendReceiveMode INTEGER } tripProtocolVersion OBJECT-TYPE SYNTAX TripProtocolVersion MAX-ACCESS read-only STATUS current DESCRIPTION "This object will reflect the version of TRIP supported by this system. It follows the same format as TRIP version information contained in the TRIP messages generated by this TRIP entity as dictated by the TRIP standard[2]." ::= { tripCfgEntry 1 } tripItad OBJECT-TYPE SYNTAX TripItad Zinman/Walker/Jiang 8 Internet Draft January 2002 MAX-ACCESS read-write STATUS current DESCRIPTION "The Local Internet Telephony Administrative domain." ::= { tripCfgEntry 2 } tripIdentifier OBJECT-TYPE SYNTAX TripId MAX-ACCESS read-only STATUS current DESCRIPTION "The object that identifies this TRIP Client." ::= { tripCfgEntry 3 } tripAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired TRIP state. up(1) : Set the application to normal operation. down(2): Set the application to a state where it will not process TRIP messages." ::= { tripCfgEntry 4 } tripOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the TRIP protocol. up(1) : The application is operating normally, and is processing (receiving and possibly issuing) TRIP requests and responses. down(2): The application is currently unable to process TRIP messages due to a fault or if TRIP is in an initialization state. If tripAdminStatus is down(2) then tripOperStatus should be down(2). If tripAdminStatus is changed to up(1) then tripOperStatus should change to up(1) if there is no fault that prevents the TRIP protocol from moving to the Zinman/Walker/Jiang 9 Internet Draft January 2002 up(1) state." ::= { tripCfgEntry 5 } tripAddrIAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Inet Address of the tripAddr." REFERENCE "RFC 2851, section 3." ::= { tripCfgEntry 6 } tripAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the local LS that the peer connects to." REFERENCE "RFC 2851, section 3." ::= { tripCfgEntry 7 } tripPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The local tcp/udp port on the local LS that the peer connects to." ::= { tripCfgEntry 8 } tripMinItadOriginationInterval OBJECT-TYPE SYNTAX Integer32 (1..2147483647) UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Amount of time that must elapse between advertisement of update message that report changes within the LS's own ITAD." DEFVAL { 30 } ::= { tripCfgEntry 9 } tripMinRouteAdvertisementInterval OBJECT-TYPE SYNTAX Integer32 (1..2147483647) UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies minimal interval between successive Zinman/Walker/Jiang 10 Internet Draft January 2002 advertisements to a particular destination from an LS." DEFVAL { 30 } ::= { tripCfgEntry 10 } tripMaxPurgeTime OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the interval that the LS must maintain routes marked as withdrawn in its database." DEFVAL { 10 } ::= { tripCfgEntry 11 } tripDisableTime OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the interval that the TRIP module of the LS must be disabled while routes originated by this location server with high sequence numbers can be removed." DEFVAL { 180 } ::= { tripCfgEntry 12 } tripSendReceiveMode OBJECT-TYPE SYNTAX INTEGER { sendReceive(1), sendOnly(2), receiveOnly(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational mode of the trip entity running on this system." ::= { tripCfgEntry 13 } -- -- TripRouteTypeTable -- tripRouteTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF TripRouteTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TRIP Route Type table contains one entry per Zinman/Walker/Jiang 11 Internet Draft January 2002 supported protocol - address family pair." ::= { tripMIBObjects 2 } tripRouteTypeEntry OBJECT-TYPE SYNTAX TripRouteTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about the route type that the TRIP entity supports." INDEX { applIndex, tripRtTypeProtocolId, tripRtTypeAddrFamilyId } ::= { tripRouteTypeTable 1 } TripRouteTypeEntry ::= SEQUENCE { tripRtTypeProtocolId TripAppProtocol, tripRtTypeAddrFamilyId TripAddressFamily, tripRtTypeRowStatus RowStatus } tripRtTypeProtocolId OBJECT-TYPE SYNTAX TripAppProtocol MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object identifier of a protocol that this peer is using." ::= { tripRouteTypeEntry 1 } tripRtTypeAddrFamilyId OBJECT-TYPE SYNTAX TripAddressFamily MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object identifier of an address family that this peer belongs to." ::= { tripRouteTypeEntry 2 } tripRtTypeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to instantiate a row in this table. The normal row status values of createAndGo(4), createAndWait(5) and delete(6) have no application in this table." ::= { tripRouteTypeEntry 3 } -- Zinman/Walker/Jiang 12 Internet Draft January 2002 -- tripSupportedCommunityTable -- tripSupportedCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF TripSupportedCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of TRIP communities that this LS supports. A TRIP community is a group of destinations that share common properties. The TRIP Communities attribute is used to group destinations so that the routing decision can be based on the identity of the group." REFERENCE "The TRIP standard[2]" ::= { tripMIBObjects 3 } tripSupportedCommunityEntry OBJECT-TYPE SYNTAX TripSupportedCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about a community. A TRIP community is a group of destinations that share some common property. This attribute is used so that routing decisions can be based on the identity of the group" INDEX { applIndex, tripSupportedCommunityId } ::= { tripSupportedCommunityTable 1 } TripSupportedCommunityEntry ::= SEQUENCE { tripSupportedCommunityId TripCommunityId, tripSupportedCommunityItad TripItad, tripSupportedCommunityRowStatus RowStatus } tripSupportedCommunityId OBJECT-TYPE SYNTAX TripCommunityId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identifier of the supported Community." ::= { tripSupportedCommunityEntry 1 } tripSupportedCommunityItad OBJECT-TYPE SYNTAX TripItad MAX-ACCESS read-create STATUS current DESCRIPTION "The Itad of the community." ::= { tripSupportedCommunityEntry 2 } Zinman/Walker/Jiang 13 Internet Draft January 2002 tripSupportedCommunityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of the entry. This object is required to create or delete rows remotely by a manager. A value for tripSupportedCommunityItad must be set for row creation to be successful. If that method already exists for a particular applIndex, the row create operation will fail." ::= { tripSupportedCommunityEntry 3 } -- -- TripPeerTable -- tripPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF TripPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TRIP peer table. This table contains one entry per TRIP peer, and information about the connection with the peer." ::= { tripMIBObjects 4 } tripPeerEntry OBJECT-TYPE SYNTAX TripPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about the connection with a TRIP peer." INDEX { applIndex, tripPeerRemoteAddrInetType, tripPeerRemoteAddr, tripPeerRemotePort } ::= {tripPeerTable 1} TripPeerEntry ::= SEQUENCE { tripPeerRemoteAddrInetType InetAddressType, tripPeerRemoteAddr InetAddress, tripPeerRemotePort Integer32, tripPeerIdentifier TripId, tripPeerState INTEGER, tripPeerAdminStatus INTEGER, tripPeerNegotiatedVersion TripProtocolVersion, tripPeerSendReceiveMode INTEGER, tripPeerRemoteItad TripItad, tripPeerConnectRetryInterval Integer32, Zinman/Walker/Jiang 14 Internet Draft January 2002 tripPeerMaxRetryInterval Integer32, tripPeerHoldTime Integer32, tripPeerKeepAlive Integer32, tripPeerHoldTimeConfigured Integer32, tripPeerKeepAliveConfigured Integer32, tripPeerMaxPurgeTime Integer32, tripPeerDisableTime Integer32, tripPeerLearned TruthValue, tripPeerRowStatus RowStatus } tripPeerRemoteAddrInetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of Inet Address of the tripPeerRemoteAddr." REFERENCE "RFC 2851, section 3." ::= { tripPeerEntry 1 } tripPeerRemoteAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0..125)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The remote IP address of this entry's TRIP peer. The size value of 125 has been assigned due to the sub identifier of object types length limitation as defined in SMIv2." REFERENCE "RFC 2851, section 3." ::= { tripPeerEntry 2 } tripPeerRemotePort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The remote port for the TCP connection between the TRIP peers." ::= { tripPeerEntry 3 } tripPeerIdentifier OBJECT-TYPE SYNTAX TripId MAX-ACCESS read-only STATUS current DESCRIPTION "TRIP identifier of the peer." ::= { tripPeerEntry 4 } tripPeerState OBJECT-TYPE Zinman/Walker/Jiang 15 Internet Draft January 2002 SYNTAX INTEGER { idle(1), connect(2), active(3), openSent(4), openConfirm(5), established(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "TRIP Peer Finite State Machine state. idle(1) : The initial state. Local LS refuses all incoming connections. No resources are allocated to the peer. connect(2) : Local LS waiting for a transport protocol connection to be completed to the peer, and is listening for inbound transport connections from the peer. active(3) : LS is listening for an inbound connection from the peer, but is not in the process of initiating a connection to the peer. openSent(4) : LS has sent an OPEN message to its peer and is waiting for an OPEN message from its peer. openConfirm(5): LS has sent an OPEN to its peer, received an OPEN from its peer, and sent a KEEPALIVE in response to the OPEN. The LS is now waiting for a KEEPALIVE or NOTIFICATION message in response to its OPEN. established(6): LS can exchange UPDATE, NOTIFICATION,and KEEPALIVE messages with its peer." ::= { tripPeerEntry 5 } tripPeerAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to affect the TRIP connection state. up(1) : Allow a connection with the peer LS. Zinman/Walker/Jiang 16 Internet Draft January 2002 down(2) : disconnect the connection from the peer LS and do not allow any further connections to this peer." ::= { tripPeerEntry 6 } tripPeerNegotiatedVersion OBJECT-TYPE SYNTAX TripProtocolVersion MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated version of TRIP running between this local entity and this peer." ::= { tripPeerEntry 7 } tripPeerSendReceiveMode OBJECT-TYPE SYNTAX INTEGER { sendReceive(1), sendOnly(2), receiveOnly(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational mode of this peer." ::= { tripPeerEntry 8 } tripPeerRemoteItad OBJECT-TYPE SYNTAX TripItad MAX-ACCESS read-only STATUS current DESCRIPTION "The Internet Telephony Administrative domain of this peer." ::= { tripPeerEntry 9 } tripPeerConnectRetryInterval OBJECT-TYPE SYNTAX Integer32 (0..2147483647) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the initial amount of time that will elapse between connection retry. This value should double after each attempt up to the value of tripPeerMaxRetryInterval. This value must always be less than or equal to the value of tripPeerMaxRetryInterval. Attempts to set this value higher than the max retry should not be allowed." DEFVAL { 120 } ::= { tripPeerEntry 10 } Zinman/Walker/Jiang 17 Internet Draft January 2002 tripPeerMaxRetryInterval OBJECT-TYPE SYNTAX Integer32 (0..2147483647) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the maximum amount of time that will elapse between connection retries. Once the value of tripPeerConnectRetryInterval has reached this value, no more retries will be attempted. Attempts to set this value lower than the retry interval should not be allowed." DEFVAL { 360 } ::= { tripPeerEntry 11 } tripPeerHoldTime OBJECT-TYPE SYNTAX Integer32 (1..2147483647) UNITS "Seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval in seconds for the hold timer that is established with the peer. The value of this object is the smaller of the values in tripPeerHoldTimeConfigured and the hold time received in the open message." ::= { tripPeerEntry 12 } tripPeerKeepAlive OBJECT-TYPE SYNTAX Integer32 (1..2147483647) UNITS "Seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the amount of time that must elapse between keep alive messages. This value is negotiated with the remote when a connection is established." ::= { tripPeerEntry 13 } tripPeerHoldTimeConfigured OBJECT-TYPE SYNTAX Integer32 (0 | 3..65535) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the maximum time that may elapse between the receipt of successive keepalive or update message." DEFVAL { 240 } ::= { tripPeerEntry 14 } tripPeerKeepAliveConfigured OBJECT-TYPE SYNTAX Integer32 (1..2147483647) Zinman/Walker/Jiang 18 Internet Draft January 2002 UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the amount of time that must elapse between keep alive messages." DEFVAL { 30 } ::= { tripPeerEntry 15 } tripPeerMaxPurgeTime OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicate the interval that the LS must maintain routes marked as withdrawn in its database." DEFVAL { 10 } ::= { tripPeerEntry 16 } tripPeerDisableTime OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicate the interval that the TRIP module of the peer LS must be disabled while routes originated by the local LS with high sequence numbers can be removed." DEFVAL { 180 } ::= { tripPeerEntry 17 } tripPeerLearned OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this entry was learned or configured." DEFVAL { false } ::= { tripPeerEntry 18 } tripPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of the entry. This object is required to create or delete rows remotely by a manager. If that method already exists for a particular applIndex, the row create operation will fail." ::= { tripPeerEntry 19 } Zinman/Walker/Jiang 19 Internet Draft January 2002 -- -- tripPeerRouteTypeTable -- tripPeerRouteTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF TripPeerRouteTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TRIP peer Route Type table contains one entry per supported protocol - address family pair. Each instance of tripPeerRouteTypeEntry has an instance in the tripPeerTable as a parent." ::= { tripMIBObjects 5 } tripPeerRouteTypeEntry OBJECT-TYPE SYNTAX TripPeerRouteTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about the route type that the TRIP peer supports." INDEX { applIndex, tripPeerRemoteAddrInetType, tripPeerRemoteAddr, tripPeerRemotePort, tripPeerRtTypeProtocolId, tripPeerRtTypeAddrFamilyId } ::= { tripPeerRouteTypeTable 1 } TripPeerRouteTypeEntry ::= SEQUENCE { tripPeerRtTypeProtocolId TripAppProtocol, tripPeerRtTypeAddrFamilyId TripAddressFamily, tripPeerRtTypeRowStatus RowStatus } tripPeerRtTypeProtocolId OBJECT-TYPE SYNTAX TripAppProtocol MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object identifier of a protocol that this peer is using." ::= { tripPeerRouteTypeEntry 1 } tripPeerRtTypeAddrFamilyId OBJECT-TYPE SYNTAX TripAddressFamily MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object identifier of an address family that this peer Zinman/Walker/Jiang 20 Internet Draft January 2002 belongs to." ::= { tripPeerRouteTypeEntry 2 } tripPeerRtTypeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to instantiate a row in this table. The normal row status values of createAndGo(4), createAndWait(5) and delete(6) have no application in this table." ::= { tripPeerRouteTypeEntry 3 } -- -- TripPeerStatsTable -- tripPeerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TripPeerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TRIP peer stats table. This table contains one entry per TRIP peer, and statistics related to the connection with the peer." ::= { tripMIBObjects 6 } tripPeerStatsEntry OBJECT-TYPE SYNTAX TripPeerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about the connection with a TRIP peer." AUGMENTS { tripPeerEntry } ::= { tripPeerStatsTable 1 } TripPeerStatsEntry ::= SEQUENCE { tripPeerInUpdates Counter32, tripPeerOutUpdates Counter32, tripPeerInTotalMessages Counter32, tripPeerOutTotalMessages Counter32, tripPeerFsmEstablishedTransitions Counter32, tripPeerFsmEstablishedTime DateAndTime, tripPeerInUpdateElapsedTime TimeInterval, tripPeerStateChangeTime TimeStamp } tripPeerInUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only Zinman/Walker/Jiang 21 Internet Draft January 2002 STATUS current DESCRIPTION "The number of TRIP update messages received from this peer since the last restart of this LS." ::= { tripPeerStatsEntry 1 } tripPeerOutUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of TRIP update messages sent to this peer since the last restart of this location server." ::= { tripPeerStatsEntry 2 } tripPeerInTotalMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of TRIP messages received from the remote peer on this connection since the last restart of this LS." ::= { tripPeerStatsEntry 3 } tripPeerOutTotalMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of outgoing TRIP messages sent to the remote peer since the last restart of this LS." ::= { tripPeerStatsEntry 4 } tripPeerFsmEstablishedTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the TRIP peer has transitioned into the established state since the last restart of this LS." ::= { tripPeerStatsEntry 5 } tripPeerFsmEstablishedTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time and date that this peer entered the established state." ::= { tripPeerStatsEntry 6 } Zinman/Walker/Jiang 22 Internet Draft January 2002 tripPeerInUpdateElapsedTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "Elapsed time in hundredths of seconds since the last TRIP update message was received from the peer." ::= { tripPeerStatsEntry 7 } tripPeerStateChangeTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the last state change took place." ::= { tripPeerStatsEntry 8 } -- TRIP Received Route Table. This table contains -- all routes from all sources. Each entry consists -- of a route and its associated path attributes. tripRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF TripRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TRIP route table containing information about reachable routes that are to be added to service by the receiving LS." ::= { tripMIBObjects 7 } tripRouteEntry OBJECT-TYPE SYNTAX TripRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a route to a called destination." INDEX { applIndex, tripRouteAppProtocol, tripRouteAddressFamily, tripRouteAddress, tripRoutePeer } ::= { tripRouteTable 1 } TripRouteEntry ::= SEQUENCE { tripRouteAppProtocol TripAppProtocol, tripRouteAddressFamily TripAddressFamily, tripRouteAddress OCTET STRING, Zinman/Walker/Jiang 23 Internet Draft January 2002 tripRoutePeer TripId, tripRouteTRIBMask BITS, tripRouteAddressSequenceNumber Integer32, tripRouteAddressOriginatorId TripId, tripRouteNextHopServerIAddrType InetAddressType, tripRouteNextHopServer InetAddress, tripRouteNextHopServerPort Integer32, tripRouteNextHopServerItad TripItad, tripRouteMultiExitDisc Unsigned32, tripRouteLocalPref Unsigned32, tripRouteAdvertisementPath OCTET STRING, tripRouteRoutedPath OCTET STRING, tripRouteAtomicAggregate TruthValue, tripRouteUnknown OCTET STRING, tripRouteWithdrawn TruthValue, tripRouteConverted TruthValue, tripRouteReceivedTime TimeStamp } tripRouteAppProtocol OBJECT-TYPE SYNTAX TripAppProtocol MAX-ACCESS not-accessible STATUS current DESCRIPTION "The protocol for which this routing table is maintained." ::= { tripRouteEntry 1 } tripRouteAddressFamily OBJECT-TYPE SYNTAX TripAddressFamily MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the type of address for the destination route." ::= { tripRouteEntry 2 } tripRouteAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..255)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an address (prefix) of the family type given by Address Family of the destination." ::= { tripRouteEntry 3 } tripRoutePeer OBJECT-TYPE SYNTAX TripId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identifier of the peer where the route information Zinman/Walker/Jiang 24 Internet Draft January 2002 was learned." ::= { tripRouteEntry 4 } tripRouteTRIBMask OBJECT-TYPE SYNTAX BITS { adjTribIns(0), extTrib(1), locTrib(2), adjTribOut(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates which TRIB(s) this entry belongs to. This is a bit-map of possible types. The various bit positions are: 0 adjTribIns The entry is of type adj-TRIBs-ins. 1 extTrib The entry is of type ext-TRIB. 2 locTrib The entry is of type loc-TRIB. 3 adjTribOut The entry is of type adj-TRIBs-out." DEFVAL { { } } ::= { tripRouteEntry 5 } tripRouteAddressSequenceNumber OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the version of the destination route originated by the LS identified by tripRouteAddressOriginatorId intra-domain attribute." ::= { tripRouteEntry 6 } tripRouteAddressOriginatorId OBJECT-TYPE SYNTAX TripId MAX-ACCESS read-only STATUS current DESCRIPTION "This is an intra-domain attribute indicating the internal LS that originated the route into the ITAD." ::= { tripRouteEntry 7 } tripRouteNextHopServerIAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Inet Address of the tripRouteNextHopServer." REFERENCE Zinman/Walker/Jiang 25 Internet Draft January 2002 "RFC 2851, section 3." ::= { tripRouteEntry 8 } tripRouteNextHopServer OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the next hop that messages of a given protocol destined for tripRouteAddress should be sent to." ::= { tripRouteEntry 9 } tripRouteNextHopServerPort OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The port of the next hop server that this route will use." ::= { tripRouteEntry 10 } tripRouteNextHopServerItad OBJECT-TYPE SYNTAX TripItad MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the domain of the next hop." ::= { tripRouteEntry 11 } tripRouteMultiExitDisc OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "When two ITADs are connected by more than one set of peers, it is used to descriminate between multiple exit points to an adjacent ITAD." ::= { tripRouteEntry 12 } tripRouteLocalPref OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicated the local LS's degree of preference for an advertised route destination." ::= { tripRouteEntry 13 } tripRouteAdvertisementPath OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..252)) MAX-ACCESS read-only Zinman/Walker/Jiang 26 Internet Draft January 2002 STATUS current DESCRIPTION "Identifies the ITADs through wich routing information carried in an advertisement has passed. This object is probably best represented as sequence of integer. For SMI compatibility, though, it is represented as OCTET STRING. This object is a sequence of ITADs in network byte order." ::= { tripRouteEntry 14 } tripRouteRoutedPath OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..252)) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the ITADs through which messages sent using this route would pass. These are as subset of tripRouteAdvertisementPath. This object is probably best represented as sequence of integer. For SMI compatibility, though, it is represented as OCTET STRING. This object is a sequence of ITADs in network byte order." ::= { tripRouteEntry 15 } tripRouteAtomicAggregate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that a route may traverse domains not listed in tripRouteRoutedPath. If an LS selects the less specific route from a set of overlapping routes, then this value returns TRUE." ::= { tripRouteEntry 16 } tripRouteUnknown OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "One or more attributes not understood by this location server." ::= { tripRouteEntry 17 } tripRouteWithdrawn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if this route is to be removed from service by Zinman/Walker/Jiang 27 Internet Draft January 2002 the receiving LS." ::= { tripRouteEntry 18 } tripRouteConverted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if this route has been converted to a different application protocol than it had originally." ::= { tripRouteEntry 19 } tripRouteReceivedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this route was received." ::= { tripRouteEntry 20 } -- -- TRIP Received Route CommunityTable. -- tripRouteCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF TripRouteCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing a list of TRIP communities associated with a route. Each instance of tripPeerRouteTypeEntry has an instance in the tripRouteTable as a parent." REFERENCE "The TRIP standard[2]" ::= { tripMIBObjects 8 } tripRouteCommunityEntry OBJECT-TYPE SYNTAX TripRouteCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about communities associated with a route. An entry with a tripRouteAddress of 00 and a tripRoutePeer of 0 refers to the local LS." INDEX { applIndex, tripRouteAppProtocol, tripRouteAddressFamily, tripRouteAddress, tripRoutePeer, tripRouteCommunityId } Zinman/Walker/Jiang 28 Internet Draft January 2002 ::= { tripRouteCommunityTable 1 } TripRouteCommunityEntry ::= SEQUENCE { tripRouteCommunityId TripCommunityId, tripRouteCommunityItad TripItad } tripRouteCommunityId OBJECT-TYPE SYNTAX TripCommunityId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The community identifier." ::= { tripRouteCommunityEntry 1 } tripRouteCommunityItad OBJECT-TYPE SYNTAX TripItad MAX-ACCESS read-only STATUS current DESCRIPTION "The ITAD associated with this community." ::= { tripRouteCommunityEntry 2 } -- -- tripItadTopologyTable -- tripItadTopologyTable OBJECT-TYPE SYNTAX SEQUENCE OF TripItadTopologyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of link connections between peers within an ITAD." ::= { tripMIBObjects 9 } tripItadTopologyEntry OBJECT-TYPE SYNTAX TripItadTopologyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a peer of the LS identified by tripOriginatorIdentifier." INDEX { applIndex, tripItadTopologyOrigId } ::= { tripItadTopologyTable 1 } TripItadTopologyEntry ::= SEQUENCE { tripItadTopologyOrigId TripId, tripItadTopologySeqNum Integer32 } Zinman/Walker/Jiang 29 Internet Draft January 2002 tripItadTopologyOrigId OBJECT-TYPE SYNTAX TripId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the internal LS that originated the ITAD topology information into the ITAD." ::= { tripItadTopologyEntry 1 } tripItadTopologySeqNum OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the version of the ITAD topology originated by the LS identified by tripOriginatorIdentifier." ::= { tripItadTopologyEntry 2 } -- -- tripItadTopologyIdTable -- tripItadTopologyIdTable OBJECT-TYPE SYNTAX SEQUENCE OF TripItadTopologyIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of other LS's within the ITAD domain that the LS identified by tripOriginatorIdentifier is currently peering. Each instance of tripItadTopologyIdEntry has an instance in the tripItadTopologyTable as a parent." ::= { tripMIBObjects 10 } tripItadTopologyIdEntry OBJECT-TYPE SYNTAX TripItadTopologyIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a peer to the LS identified by tripOriginatorIdentifier." INDEX { applIndex, tripItadTopologyOrigId, tripItadTopologyId } ::= { tripItadTopologyIdTable 1 } TripItadTopologyIdEntry ::= SEQUENCE { tripItadTopologyId TripId, tripItadTopologyIdRowStatus RowStatus } Zinman/Walker/Jiang 30 Internet Draft January 2002 tripItadTopologyId OBJECT-TYPE SYNTAX TripId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index into this entry. Indicates the other location servers within the ITAD domain that this LS identified by tripOriginatorIdentifier is currently peering." ::= { tripItadTopologyIdEntry 1 } tripItadTopologyIdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to instantiate a row in this table. The normal row status values of createAndGo(4), createAndWait(5) and delete(6) have no application in this table." ::= { tripItadTopologyIdEntry 2 } -- -- Notification objects -- tripNotifApplIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the applIndex as described in RFC 2788. It is used to bind this notification with a specific instance of TRIP entity." ::= { tripMIBNotifications 1 } tripNotifPeerAddrInetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The type of Inet Address of the tripNotifPeerAddr." REFERENCE "RFC 2851, section 3." ::= { tripMIBNotifications 2 } tripNotifPeerAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0..125)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The remote IP address of this entry's TRIP peer. The Zinman/Walker/Jiang 31 Internet Draft January 2002 size value of 125 has been assigned due to the sub identifier of object types length limitation as defined in SMIv2." REFERENCE "RFC 2851, section 3." ::= { tripMIBNotifications 3 } tripNotifPeerErrCode OBJECT-TYPE SYNTAX INTEGER { messageHeader(1), openMessage(2), updateMessage(3), holdTimerExpired(4), finiteStateMachine(5), cease(6), tripNotification(7) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Notification message of TRIP error. The meaning of this value is applicable to the following functions: 1 - message header. All errors detected while processing the TRIP message header. 2 - open message. All errors detected while processing the OPEN message. 3 - update message. All errors detected while processing the UPDATE message. 4 - hold timer expired. A notification generated when the hold timer expires. 5 - finite state machine. All errors detected by the TRIP Finite State Machine. 6 - cease. Any fatal error condition that the rest of the values do not cover. 7 - trip notification message. Any error encountered while sending a notification message." ::= { tripMIBNotifications 4 } tripNotifPeerErrSubcode OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The sub error code associated with error code. The meaning of this value is dependent on the value of tripNotifPeerErrCode. Zinman/Walker/Jiang 32 Internet Draft January 2002 Message Header (1) Error Subcodes: 1 - Bad Message Length. 2 - Bad Message Type. OPEN Message (2) Error Subcodes: 1 - Unsupported Version Number. 2 - Bad Peer ITAD. 3 - Bad TRIP Identifier. 4 - Unsupported Optional Parameter. 5 - Unacceptable Hold Time. 6 - Unsupported Capability. 7 - Capability Mismatch. UPDATE Message (3) Error Subcodes: 1 - Malformed Attribute List. 2 - Unrecognized Well-known Attribute. 3 - Missing Well-known Mandatory Attribute. 4 - Attribute Flags Error. 5 - Attribute Length Error. 6 - Invalid Attribute." ::= { tripMIBNotifications 5 } -- -- Notifications -- tripEstablished NOTIFICATION-TYPE STATUS current DESCRIPTION "The TRIP Established event is generated when the TRIP FSM enters the ESTABLISHED state." ::= { tripMIBNotifications 6 } tripFSM NOTIFICATION-TYPE OBJECTS { tripNotifApplIndex, tripNotifPeerAddrInetType, tripNotifPeerAddr, tripNotifPeerErrCode, tripNotifPeerErrSubcode, tripPeerState } STATUS current DESCRIPTION "The trip FSM Event is generated when any error is detected by the TRIP Finite State Machine." ::= { tripMIBNotifications 7 } tripOpenMessageError NOTIFICATION-TYPE OBJECTS { tripNotifApplIndex, tripNotifPeerAddrInetType, tripNotifPeerAddr, Zinman/Walker/Jiang 33 Internet Draft January 2002 tripNotifPeerErrCode, tripNotifPeerErrSubcode, tripPeerState } STATUS current DESCRIPTION "Errors detected while processing the OPEN message." ::= { tripMIBNotifications 8 } tripUpdateMessageError NOTIFICATION-TYPE OBJECTS { tripNotifApplIndex, tripNotifPeerAddrInetType, tripNotifPeerAddr, tripNotifPeerErrCode, tripNotifPeerErrSubcode, tripPeerState } STATUS current DESCRIPTION "Errors detected while processing the UPDATE message." ::= { tripMIBNotifications 9 } tripHoldTimerExpired NOTIFICATION-TYPE OBJECTS { tripNotifApplIndex, tripNotifPeerAddrInetType, tripNotifPeerAddr, tripNotifPeerErrCode, tripNotifPeerErrSubcode, tripPeerState } STATUS current DESCRIPTION "The system does not receive successive messages within the period specified by the negotiated Hold Time." ::= { tripMIBNotifications 10 } tripConnectionCollision NOTIFICATION-TYPE OBJECTS { tripNotifApplIndex } STATUS current DESCRIPTION "A pair of LSs tried to simultaneously to establish a transport connection to each other." ::= { tripMIBNotifications 11 } tripNotificationErr NOTIFICATION-TYPE OBJECTS { tripNotifApplIndex } STATUS current DESCRIPTION "Generated if there is an error detected in a TRIP notification message sent with another cause. Note that the TRIP notification refered to in this object is not an SNMP notification, it is a specific message described Zinman/Walker/Jiang 34 Internet Draft January 2002 in the TRIP specification." REFERENCE "The TRIP standard[2]" ::= { tripMIBNotifications 12 } -- -- Compliance Statements -- tripCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for TRIP entities." MODULE -- this module MANDATORY-GROUPS { tripConfigGroup, tripPeerTableConfigGroup, tripRouteGroup, tripItadTopologyGroup, tripPeerTableStatsGroup } GROUP tripNotificationGroup DESCRIPTION "This group is optional. A TRIP entity can choose not to send any notifications. If this group is implemented, the tripNotifObjectGroup must also be implemented." GROUP tripNotifObjectGroup DESCRIPTION "This group is optional. A TRIP entity can choose not to send any notifications. If this group is implemented, the tripNotificationGroup must also be implemented." MODULE NETWORK-SERVICES-MIB MANDATORY-GROUPS { applGroup } ::= { tripMIBCompliance 1 } -- -- Object and event conformance groups -- tripConfigGroup OBJECT-GROUP OBJECTS { tripProtocolVersion, tripItad, tripIdentifier, tripOperStatus, tripAdminStatus, tripAddrIAddrType, tripAddr, Zinman/Walker/Jiang 35 Internet Draft January 2002 tripPort, tripMinItadOriginationInterval, tripMinRouteAdvertisementInterval, tripMaxPurgeTime, tripDisableTime, tripSendReceiveMode, tripSupportedCommunityItad, tripSupportedCommunityRowStatus, tripRtTypeRowStatus } STATUS current DESCRIPTION "The global objects for configuring trip." ::= { tripMIBGroups 1 } tripPeerTableConfigGroup OBJECT-GROUP OBJECTS { tripPeerIdentifier, tripPeerState, tripPeerAdminStatus, tripPeerNegotiatedVersion, tripPeerSendReceiveMode, tripPeerRemoteItad, tripPeerConnectRetryInterval, tripPeerMaxRetryInterval, tripPeerHoldTime, tripPeerKeepAlive, tripPeerHoldTimeConfigured, tripPeerKeepAliveConfigured, tripPeerMaxPurgeTime, tripPeerDisableTime, tripPeerLearned, tripPeerRowStatus } STATUS current DESCRIPTION "The global objects for configuring the TRIP peer table." ::= { tripMIBGroups 2 } tripPeerTableStatsGroup OBJECT-GROUP OBJECTS { tripPeerInUpdates, tripPeerOutUpdates, tripPeerInTotalMessages, tripPeerOutTotalMessages, tripPeerFsmEstablishedTransitions, tripPeerFsmEstablishedTime, tripPeerInUpdateElapsedTime, tripPeerStateChangeTime } Zinman/Walker/Jiang 36 Internet Draft January 2002 STATUS current DESCRIPTION "The global statistics the TRIP peer table." ::= { tripMIBGroups 3 } tripRouteGroup OBJECT-GROUP OBJECTS { tripRouteTRIBMask, tripRouteAddressSequenceNumber, tripRouteAddressOriginatorId, tripRouteNextHopServerIAddrType, tripRouteNextHopServer, tripRouteNextHopServerPort, tripRouteNextHopServerItad, tripRouteMultiExitDisc, tripRouteLocalPref, tripRouteAdvertisementPath, tripRouteRoutedPath, tripRouteAtomicAggregate, tripRouteUnknown, tripRouteWithdrawn, tripRouteConverted, tripRouteReceivedTime, tripRouteCommunityItad, tripPeerRtTypeRowStatus } STATUS current DESCRIPTION "The global objects for configuring route attribute." ::= { tripMIBGroups 4 } tripItadTopologyGroup OBJECT-GROUP OBJECTS { tripItadTopologySeqNum, tripItadTopologyIdRowStatus } STATUS current DESCRIPTION "The objects that define the TRIP ITAD topology." ::= { tripMIBGroups 5 } tripNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { tripEstablished, tripFSM, tripOpenMessageError, tripUpdateMessageError, tripHoldTimerExpired, tripConnectionCollision, tripNotificationErr } Zinman/Walker/Jiang 37 Internet Draft January 2002 STATUS current DESCRIPTION "A collection of notifications defined for TRIP." ::= { tripMIBGroups 6 } tripNotifObjectGroup OBJECT-GROUP OBJECTS { tripNotifApplIndex, tripNotifPeerAddrInetType, tripNotifPeerAddr, tripNotifPeerErrCode, tripNotifPeerErrSubcode } STATUS current DESCRIPTION "The collection of objects that specify information for TRIP notifications." ::= { tripMIBGroups 7 } END