smilint output for ./DOCS-IETF-RFI-MIB
| Message Severities |
|---|
| Severity | Count |
|---|
| change recommended | 6 |
| Message Types |
|---|
| Type | Count |
|---|
| compliance-object-status (change recommended) | 1 |
| group-membership (change recommended) | 2 |
| group-object-status (change recommended) | 3 |
Messages:
DOCS-IETF-RFI-MIB
1: -- extracted from draft-ietf-ipcdn-docs-rfmibv2-06.txt
2: -- at Thu Mar 6 06:12:29 2003
1271:
1272: docsIfCmRangingRespTimeout OBJECT-TYPE
1272: change recommended -
warning: node `docsIfCmRangingRespTimeout' must be contained in at least one conformance group
1273: SYNTAX TimeTicks
1274: MAX-ACCESS read-write
1275: STATUS obsolete
1276: DESCRIPTION
1277: "Waiting time for a Ranging Response packet."
1278: REFERENCE
1279: "Data-Over-Cable Service Interface Specifications: Radio
1280: Frequency Interface Specification SP-RFIv2.0-IO2-020617,
1281: Section 9.1.6."
1282: DEFVAL { 20 }
1283: ::= { docsIfCmMacEntry 3 }
...
1875: -- implementations of this MIB should use that object instead.
1876: docsIfCmtsInsertionInterval OBJECT-TYPE
1876: change recommended -
warning: node `docsIfCmtsInsertionInterval' must be contained in at least one conformance group
1877: SYNTAX TimeTicks
1878: MAX-ACCESS read-write
1879: STATUS obsolete
1880: DESCRIPTION
1881: "The amount of time to elapse between each broadcast
1882: station maintenance grant. Broadcast station maintenance
1883: grants are used to allow new cable modems to join the
1884: network. Zero indicates that a vendor-specific algorithm
1885: is used instead of a fixed time. Maximum amount of time
1886: permitted by the specification is 2 seconds."
1887: REFERENCE
1888: "Data-Over-Cable Service Interface Specifications: Radio
1889: Frequency Interface Specification SP-RFIv2.0-IO2-020617,
1890: Annex B."
1891: ::= { docsIfCmtsMacEntry 5 }
...
3820:
3821: docsIfBasicCompliance MODULE-COMPLIANCE
3822: STATUS current
3823: DESCRIPTION
3824: "The compliance statement for devices that implement
3825: MCNS/DOCSIS compliant Radio Frequency Interfaces."
3826:
3827: MODULE -- docsIfMib
3828:
3829: -- unconditionally mandatory groups
3830: MANDATORY-GROUPS {
3831: docsIfBasicGroup
3832: }
3833:
3834: -- conditionally mandatory group
3835: GROUP docsIfCmGroup
3836: DESCRIPTION
3837: "This group is implemented only in Cable Modems, not in
3838: Cable Modem Termination Systems."
3839:
3840: -- conditionally mandatory group
3841: GROUP docsIfCmtsGroup
3842: DESCRIPTION
3843: "This group is implemented only in Cable Modem Termination
3844: Systems, not in Cable Modems."
3845:
3846: OBJECT docsIfDownChannelFrequency
3847: WRITE-SYNTAX Integer32 (54000000..860000000)
3848: MIN-ACCESS read-only
3849: DESCRIPTION
3850: "Read-write in Cable Modem Termination Systems;
3851: read-only in Cable Modems. The values above are
3852: appropriate for a cable plant using a Sub-Split channel
3853: plan. If DOCSIS is extended to cover other types of
3854: channel plans (and frequency allocations) this object
3855: will be modified accordingly."
3856:
3857: OBJECT docsIfDownChannelWidth
3858: WRITE-SYNTAX Integer32 (6000000)
3859: MIN-ACCESS read-only
3860: DESCRIPTION
3861: "It is conformant to implement this object as read-only.
3862: In Cable Modems, this object is always implemented as
3863: read-only. The above value is appropriate for cable
3864: plants running under NTSC (National Television
3865: Standards Committee) standards. If DOCSIS is extended to
3866: work with other standard (e.g. European standards), this
3867: object will be modified accordingly."
3868:
3869: OBJECT docsIfDownChannelModulation
3870: WRITE-SYNTAX INTEGER {
3871: qam64 (3),
3872: qam256 (4)
3873: }
3874: MIN-ACCESS read-only
3875: DESCRIPTION
3876: "Read-write in Cable Modem Termination Systems;
3877: read-only in Cable Modems."
3878:
3879: OBJECT docsIfDownChannelInterleave
3880: WRITE-SYNTAX INTEGER {
3881: taps8Increment16(3),
3882: taps16Increment8(4),
3883: taps32Increment4(5),
3884: taps64Increment2(6),
3885: taps128Increment1(7)
3886: }
3887: MIN-ACCESS read-only
3888: DESCRIPTION
3889: "Read-write in Cable Modem Termination Systems;
3890: read-only in Cable Modems."
3891:
3892: OBJECT docsIfDownChannelPower
3893: MIN-ACCESS read-only
3894: DESCRIPTION
3895: "Read-write in Cable Modem Termination Systems;
3896: read-only in Cable Modems."
3897:
3898: OBJECT docsIfUpChannelFrequency
3899: WRITE-SYNTAX Integer32 (5000000..42000000)
3900: MIN-ACCESS read-only
3901: DESCRIPTION
3902: "Read-write in Cable Modem Termination Systems;
3903: read-only in Cable Modems.The values above are
3904: appropriate for a cable plant using a Sub-Split channel
3905: plan. If DOCSIS is extended to cover other types of
3906: channel plans (and frequency allocations) this object
3907: will be modified accordingly."
3908:
3909: OBJECT docsIfUpChannelWidth
3910: WRITE-SYNTAX Integer32 (200000..3200000)
3911: MIN-ACCESS read-only
3912: DESCRIPTION
3913: "Read-write in Cable Modem Termination Systems;
3914: read-only in Cable Modems.The above value is appropriate
3915: for cable plants running under NTSC (National Television
3916: Standards Committee) standards. If DOCSIS is extended to
3917: work with other standard (e.g. European standards), this
3918: object will be modified accordingly."
3919:
3920: OBJECT docsIfUpChannelModulationProfile
3921: MIN-ACCESS read-only
3922: DESCRIPTION
3923: "Read-write in Cable Modem Termination Systems;
3924: read-only in Cable Modems."
3925:
3926: OBJECT docsIfUpChannelSlotSize
3927: MIN-ACCESS read-only
3928: DESCRIPTION
3929: "This object is always read-only in Cable Modems.
3930: It is compliant to implement this object as read-only
3931: in Cable Modem Termination Systems."
3932:
3933: OBJECT docsIfUpChannelRangingBackoffStart
3934: MIN-ACCESS read-only
3935: DESCRIPTION
3936: "Read-write in Cable Modem Termination Systems;
3937: read-only in Cable Modems."
3938:
3939: OBJECT docsIfUpChannelRangingBackoffEnd
3940: MIN-ACCESS read-only
3941: DESCRIPTION
3942: "Read-write in Cable Modem Termination Systems;
3943: read-only in Cable Modems."
3944:
3945: OBJECT docsIfUpChannelTxBackoffStart
3946: MIN-ACCESS read-only
3947: DESCRIPTION
3948: "Read-write in Cable Modem Termination Systems;
3949: read-only in Cable Modems."
3950:
3951: OBJECT docsIfUpChannelTxBackoffEnd
3952: MIN-ACCESS read-only
3953: DESCRIPTION
3954: "Read-write in Cable Modem Termination Systems;
3955: read-only in Cable Modems."
3956:
3957: OBJECT docsIfQosProfPriority
3958: MIN-ACCESS read-only
3959: DESCRIPTION
3960: "This object is always read-only in Cable Modems.
3961: It is compliant to implement this object as read-only
3962: in Cable Modem Termination Systems."
3963:
3964: OBJECT docsIfQosProfMaxUpBandwidth
3965: MIN-ACCESS read-only
3966: DESCRIPTION
3967: "This object is always read-only in Cable Modems.
3968: It is compliant to implement this object as read-only
3969: in Cable Modem Termination Systems."
3970:
3971: OBJECT docsIfQosProfGuarUpBandwidth
3972: MIN-ACCESS read-only
3973: DESCRIPTION
3974: "This object is always read-only in Cable Modems.
3975: It is compliant to implement this object as read-only
3976: in Cable Modem Termination Systems."
3977:
3978: OBJECT docsIfQosProfMaxDownBandwidth
3979: MIN-ACCESS read-only
3980: DESCRIPTION
3981: "This object is always read-only in Cable Modems.
3982: It is compliant to implement this object as read-only
3983: in Cable Modem Termination Systems."
3984:
3985: OBJECT docsIfQosProfMaxTxBurst
3985: change recommended -
warning: current compliance statement `docsIfBasicCompliance' includes deprecated object `docsIfQosProfMaxTxBurst'
3986: MIN-ACCESS read-only
3987: DESCRIPTION
3988: "This object is always read-only in Cable Modems.
3989: It is compliant to implement this object as read-only
3990: in Cable Modem Termination Systems."
3991:
3992: OBJECT docsIfQosProfBaselinePrivacy
3993: MIN-ACCESS read-only
3994: DESCRIPTION
3995: "This object is always read-only in Cable Modems.
3996: It is compliant to implement this object as read-only
3997: in Cable Modem Termination Systems."
3998:
3999: OBJECT docsIfQosProfStatus
4000: MIN-ACCESS read-only
4001: DESCRIPTION
4002: "This object is always read-only in Cable Modems.
4003: It is compliant to implement this object as read-only
4004: in Cable Modem Termination Systems."
4005:
4006: OBJECT docsIfCmtsServiceAdminStatus
4007: MIN-ACCESS read-only
4008: DESCRIPTION
4009: "It is compliant to implement this object as read-only."
4010:
4011: OBJECT docsIfCmtsSyncInterval
4012: MIN-ACCESS read-only
4013: DESCRIPTION
4014: "It is compliant to implement this object as read-only."
4015:
4016: OBJECT docsIfCmtsUcdInterval
4017: MIN-ACCESS read-only
4018: DESCRIPTION
4019: "It is compliant to implement this object as read-only."
4020:
4021: OBJECT docsIfCmtsInsertInterval
4022: MIN-ACCESS read-only
4023: DESCRIPTION
4024: "It is compliant to implement this object as read-only."
4025:
4026: OBJECT docsIfCmtsInvitedRangingAttempts
4027: MIN-ACCESS read-only
4028: DESCRIPTION
4029: "It is compliant to implement this object as read-only."
4030:
4031: OBJECT docsIfCmtsQosProfilePermissions
4032: MIN-ACCESS read-only
4033: DESCRIPTION
4034: "It is compliant to implement this object as read-only."
4035:
4036: OBJECT docsIfCmtsModType
4037: WRITE-SYNTAX INTEGER {
4038: qpsk (2),
4039: qam16 (3)
4040: }
4041: DESCRIPTION
4042: "Management station may only set 16QAM or QPSK modulation,
4043: but others might be possible based on device
4044: configuration."
4045:
4046:
4047: ::= { docsIfCompliances 1 }
4048:
4049: docsIfBasicGroup OBJECT-GROUP
4049: change recommended -
warning: current group `docsIfBasicGroup' includes deprecated object `docsIfQosProfMaxTxBurst'
4050: OBJECTS {
4051: docsIfDownChannelId,
4052: docsIfDownChannelFrequency,
4053: docsIfDownChannelWidth,
4054: docsIfDownChannelModulation,
4055: docsIfDownChannelInterleave,
4056: docsIfDownChannelPower,
4057: docsIfUpChannelId,
4058: docsIfUpChannelFrequency,
4059: docsIfUpChannelWidth,
4060: docsIfUpChannelModulationProfile,
4061: docsIfUpChannelSlotSize,
4062: docsIfUpChannelTxTimingOffset,
4063: docsIfUpChannelRangingBackoffStart,
4064: docsIfUpChannelRangingBackoffEnd,
4065: docsIfUpChannelTxBackoffStart,
4066: docsIfUpChannelTxBackoffEnd,
4067: docsIfQosProfPriority,
4068: docsIfQosProfMaxUpBandwidth,
4069: docsIfQosProfGuarUpBandwidth,
4070: docsIfQosProfMaxDownBandwidth,
4071: docsIfQosProfMaxTxBurst,
4072: docsIfQosProfBaselinePrivacy,
4073: docsIfQosProfStatus,
4074: docsIfSigQIncludesContention,
4075: docsIfSigQUnerroreds,
4076: docsIfSigQCorrecteds,
4077: docsIfSigQUncorrectables,
4078: docsIfSigQSignalNoise,
4079: docsIfSigQMicroreflections,
4080: docsIfSigQEqualizationData
4081: }
4082: STATUS current
4083: DESCRIPTION
4084: "Group of objects implemented in both Cable Modems and
4085: Cable Modem Termination Systems."
4086: ::= { docsIfGroups 1 }
4087:
4088: -- The following table was modified to correct naming conventions for
...
4126:
4127: docsIfCmtsGroup OBJECT-GROUP
4127: change recommended -
warning: current group `docsIfCmtsGroup' includes deprecated object `docsIfCmtsCmStatusIpAddress'
4127: change recommended -
warning: current group `docsIfCmtsGroup' includes deprecated object `docsIfCmtsServiceCmStatusIndex'
4128: OBJECTS {
4129: docsIfCmtsCapabilities,
4130: docsIfCmtsSyncInterval,
4131: docsIfCmtsUcdInterval,
4132: docsIfCmtsMaxServiceIds,
4133: -- docsIfCmtsInsertionInterval,
4134: docsIfCmtsInvitedRangingAttempts,
4135: docsIfCmtsInsertInterval,
4136: docsIfCmtsStatusInvalidRangeReqs,
4137: docsIfCmtsStatusRangingAborteds,
4138: docsIfCmtsStatusInvalidRegReqs,
4139: docsIfCmtsStatusFailedRegReqs,
4140: docsIfCmtsStatusInvalidDataReqs,
4141: docsIfCmtsStatusT5Timeouts,
4142: docsIfCmtsCmStatusMacAddress,
4143: docsIfCmtsCmStatusIpAddress,
4144: docsIfCmtsCmStatusDownChannelIfIndex,
4145: docsIfCmtsCmStatusUpChannelIfIndex,
4146: docsIfCmtsCmStatusRxPower,
4147: docsIfCmtsCmStatusTimingOffset,
4148: docsIfCmtsCmStatusEqualizationData,
4149: docsIfCmtsCmStatusValue,
4150: docsIfCmtsCmStatusUnerroreds,
4151: docsIfCmtsCmStatusCorrecteds,
4152: docsIfCmtsCmStatusUncorrectables,
4153: docsIfCmtsCmStatusSignalNoise,
4154: docsIfCmtsCmStatusMicroreflections,
4155: docsIfCmtsServiceCmStatusIndex,
4156: docsIfCmtsServiceAdminStatus,
4157: docsIfCmtsServiceQosProfile,
4158: docsIfCmtsServiceCreateTime,
4159: docsIfCmtsServiceInOctets,
4160: docsIfCmtsServiceInPackets,
4161: docsIfCmtsModType,
4162: docsIfCmtsModControl,
4163: docsIfCmtsModPreambleLen,
4164: docsIfCmtsModDifferentialEncoding,
4165: docsIfCmtsModFECErrorCorrection,
4166: docsIfCmtsModFECCodewordLength,
4167: docsIfCmtsModScramblerSeed,
4168: docsIfCmtsModMaxBurstSize,
4169: docsIfCmtsModGuardTimeSize,
4170: docsIfCmtsModLastCodewordShortened,
4171: docsIfCmtsModScrambler,
4172: docsIfCmtsQosProfilePermissions,
4173: docsIfCmtsCmPtr
4174: }
4175: STATUS current
4176: DESCRIPTION
4177: "Group of objects implemented in Cable Modem Termination
4178: Systems."
4179: ::= { docsIfGroups 3 }
4180:
4181:
4182: -- The following is not necessary and was commented out to avoid
4183: -- SMICng warnings
4184: -- docsIfObsoleteGroup OBJECT-GROUP
4185: -- OBJECTS {
4186: -- docsIfCmRangingRespTimeout,
4187: -- docsIfCmtsInsertionInterval
4188: -- }
4189: -- STATUS obsolete
4190: -- DESCRIPTION
4191: -- "Group of objects obsoleted."
4192: -- ::= { docsIfGroups 4 }
4193:
4194:
4195: --
4196: -- RFC xxxx Conformance definitions
4197: --